randomly cut out...help
#32
Scooby Regular
Thread Starter
Join Date: Apr 2015
Location: Worthing
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Where are all the earths please so i can check and clean them up. Pump is fine i believe, tried another pump in a bucket of petrol direct to were it goes on inpet and still exactly the same.
#33
Scooby Regular
iTrader: (1)
Not sure.
I thought there was a diagram on an old post on here from a while back but I can't find it.
Meantime here are some pointers and an old post with a 'cutting out' solution:
https://www.scoobynet.com/general-technical-10/548415-wheres-the-best-points-for-earthing-mod.html
http://www.ultimatesubaru.org/forum/topic/40404-grounding-mod-re-visited-56k-warning/
https://www.scoobynet.com/scoobynet-general-1/953118-bad-earth-opinions.html
I thought there was a diagram on an old post on here from a while back but I can't find it.
Meantime here are some pointers and an old post with a 'cutting out' solution:
https://www.scoobynet.com/general-technical-10/548415-wheres-the-best-points-for-earthing-mod.html
http://www.ultimatesubaru.org/forum/topic/40404-grounding-mod-re-visited-56k-warning/
https://www.scoobynet.com/scoobynet-general-1/953118-bad-earth-opinions.html
#35
Scooby Regular
Thread Starter
Join Date: Apr 2015
Location: Worthing
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Still no different. Strange but could it be coil pack? its the only thing i haven't tried. Someone said to me it could be not giving a powerful enough spark to run on all 4 cylinders and the reason it runs better on carb cleaner is because its a more combustible mixture going into the cylinders
#36
Scooby Regular
Thread Starter
Join Date: Apr 2015
Location: Worthing
Posts: 34
Likes: 0
Received 0 Likes
on
0 Posts
Replaced the earths engine and batt now have 6 in total. Quick update. all injectors working fine. Compression is 150psi on all cylinders, Got a different coil pack on it and still the same. Took plugs out back two look fine, front two looked new but was wet. Test the plugs on the leads and the engine and both fronts have good spark. Any ideas why the front 2 plugs would have spark and be wet with petrol when removed?
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
domu
ScoobyNet General
7
03 October 2015 03:46 AM
DogsofWar
Engine Management and ECU Remapping
16
23 September 2015 07:41 PM
alcazar
Non Scooby Related
5
18 September 2015 11:49 PM