Thought so.

 

I'm at 350bhp with pinks at std pressure at 88% injector duty cycle (11.3:1 AFR)

 

My tuner has made up to 420HP with std reg, at 96% DC..

But, this was with a 2.35 on low boost... 1.4 bar with a DOM 3.

 

Who mapped it?

 

My current car or previous Blob?

Current car was mapped by Andy Forrest in January, made 345/360 on Delta Dash.

Have since been using a bloke called Scott Adams in Glasgow to do my mapping.

He tweaked Andy's original map to 365/365 - was running rich and a couple of other wee issues - Delta Dash again.

Mapped it again with all the new stuff bolted on 425/381 and 414/396 - two Delta Dash runs.

Current car has never been on a rolling road.

 

I'm 11:1 AFR, 1.5 bar on the new turbo and 93% duty.

Was only at 70% duty prior to all of the new bolt ons

 

What were the issues you had with Andy's map? I have a stumble as I tip in on the throttle.
What sort of price difference is there between the two? PM if you want

 

That's good results, did you buy the turbo off eBay costing £500 ish?
Are you going to change the injectors or just leave them as is.

 

Yeah, it was £5-600 if I remember. Included a fitting kit as well!

Gonna change injectors, probably after Christmas now though £££

 

That's lm420 power for quarter of the price.

 

Yep! But of course, my turbo is no good because it doesn't say Turbo Dynamics/Garret etc on it

Going on a rolling road on 4th December to see what that says. Still confident it's a 400hp or there abouts car!

 

Hi there, what boost did this end up making? You originally said you were aiming for 1.6 bar, did you manage that? What does it hold up the revs? When does it taper off and to what boost? Cheers 👍

 

We set it at 1.5 bar, was no need to go any higher. Will need to have my mapper check how it tapers, but it pulls hard to the redline.

 

Cool, do you not have a boost gauge?

 

Yeah I do, but the vac line split when we were doing everything to the car. Haven't had a chance to sort it yet, typical

 

post the graph up when done.

 

Ok doke, sort it out and get back to me!

 

R/R tomoz still on?

 

Nope, I can't drive. Snapped the ligaments in my foot/ankle playing rugby last weekend

 

More waiting

 

Afraid so! Can't walk let alone drive at the moment, back to hospital next Friday, so hopefully they'll allow me then. Maybe before, depending how painful it is

 

poor excuse for not showing result,,,,,, lol

joking aside, ouch! hope it heals quick chap!

 

It's not going to drive itself to the dyno
Hopefully a week or two.

 

Here a video of mu Kinu 20G.. Billet wheel TD05H 20G STS (8cm housing)

only 1.25 bar (skip to 45 sec)

 

looking and being good are too different things lol

 

Nice singing 🙊

Since everyone is still waiting on my dyno result, here's a vid of mine. Some E/L noise

https://m.youtube.com/watch?v=EyLruKbHWnE

 

Got so excited that the car was finally running after 3 months of f*cking around

 

I'll let you off then looks sore. But when you man up get it done

 

How's that foot of yours? any closer to getting to a dyno

 

dyno my mate??