Lm420 turbo oil feed, what's required
16 May 2016, 08:08 PM
#33
Scooby Regular
Reason i hate buying anything from ebay.
What i needed was a feed an6 - m10x1
Had to buy a small adapter too.
I have pictures of all the parts on my thread im sure.
M10x1 to an6 male adapter x1
Oil feed to suit x1
1mm oil restrictor for turbo. X1
16 May 2016, 08:11 PM
#36
Scooby Regular
Was only meaning as that was the turbo i used.
May not be same solution for all.
Problem being finding one that fits lol
16 May 2016, 08:18 PM
#37
the links I put up come with Newage avcs fitting direct, so I don't think it should have the same issue you had although I no what u mean about eBay 
But if you look at the pics u can see the oil feed plugs direct on to the avcs / turbo oil feed on car...
Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
But if you look at the pics u can see the oil feed plugs direct on to the avcs / turbo oil feed on car...Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
16 May 2016, 08:25 PM
#38
Scooby Regular
the links I put up come with Newage avcs fitting direct, so I don't think it should have the same issue you had although I no what u mean about eBay But if you look at the pics u can see the oil feed plugs direct on to the avcs / turbo oil feed on car...
Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
But if you look at the pics u can see the oil feed plugs direct on to the avcs / turbo oil feed on car...Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
Hard to explain this.
The hardline it claims to replace also goes to avcs on the block. So dont see how it does that.
I hope it works for ya but if u look at the pictures i put up u myt see.
Thers a banjo on the block which goes to two things. Up to turbo and around to block.
16 May 2016, 09:05 PM
#40
Former Sponsor
Join Date: Aug 2015
Location: Devon
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
That's why one end should have a 12x1 female for the block side like said earlier. All you need is to find out the thread of the turbo then it'll be easy if it's like a garret it'll be 7/16ths but you'll have to check.
16 May 2016, 09:08 PM
#41
Scooby Regular
Means no need for adapter.
It is garret based so will be that size.
Buy from HEL then you know its a decent product.
No ebay gambles. !!
16 May 2016, 09:12 PM
#43
Former Sponsor
Join Date: Aug 2015
Location: Devon
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
We can supply a male/ male garret adapter or a garret restrictor bolt for a banjo whichever is preferred.
Thread
Thread Starter
Forum
Replies
Last Post
B8MEE
Subaru Parts
0
23 March 2016 06:48 PM