Lm420 turbo oil feed, what's required
#33
Scooby Regular
Reason i hate buying anything from ebay.
What i needed was a feed an6 - m10x1
Had to buy a small adapter too.
I have pictures of all the parts on my thread im sure.
M10x1 to an6 male adapter x1
Oil feed to suit x1
1mm oil restrictor for turbo. X1
#36
Scooby Regular
Was only meaning as that was the turbo i used.
May not be same solution for all.
Problem being finding one that fits lol
#37
the links I put up come with Newage avcs fitting direct, so I don't think it should have the same issue you had although I no what u mean about eBay But if you look at the pics u can see the oil feed plugs direct on to the avcs / turbo oil feed on car...
Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
#38
Scooby Regular
the links I put up come with Newage avcs fitting direct, so I don't think it should have the same issue you had although I no what u mean about eBay But if you look at the pics u can see the oil feed plugs direct on to the avcs / turbo oil feed on car...
Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
Yours was originally designed for a sub with no avcs and you have had to modify it to fit where as this one looks like it's plug and play ( I hope )
Hard to explain this.
The hardline it claims to replace also goes to avcs on the block. So dont see how it does that.
I hope it works for ya but if u look at the pictures i put up u myt see.
Thers a banjo on the block which goes to two things. Up to turbo and around to block.
#40
That's why one end should have a 12x1 female for the block side like said earlier. All you need is to find out the thread of the turbo then it'll be easy if it's like a garret it'll be 7/16ths but you'll have to check.
#41
Scooby Regular
Means no need for adapter.
It is garret based so will be that size.
Buy from HEL then you know its a decent product.
No ebay gambles. !!
#43
We can supply a male/ male garret adapter or a garret restrictor bolt for a banjo whichever is preferred.
Thread
Thread Starter
Forum
Replies
Last Post
B8MEE
Subaru Parts
0
23 March 2016 06:48 PM