VPN behind dedicated home software firewall
#31
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Anybody know where to download the client from nortel's site from... Ive left the cd at home and need to install on a laptop... nortel extranet client 4.xx or something similar for conitivity 1600... there site is really ****.
David
David
#32
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Ok.. found it but cant download as we bought through a reseller.. doh.. and double doh... spoken to reseller and they are sending it through on email...
David
David
#33
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
ARGH ISA server aint simple..... got dns working now cant even browse net from my server.. Having to keep swapping cable between servers so I can look on the net...
Doh
David
Doh
David
#34
Scooby Regular
Thread Starter
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
got that working ... opened ports but ISA seems to block contivitys responses to me.. Ideas?
David
David
#35
Scooby Regular
ISA isn't simple..... it's about as user friendly as MS Proxy....or VPN set-up in Win2K
If your client is using aggressive mode for the Phase 1 (which it should be ) then there should be nothing for the ISA server to stop as the response to the Phase 1 neg uses the orginal session. The only thing I can think off is that that the ISA server is configured to Proxy rather than packet filter.....
Jeff
If your client is using aggressive mode for the Phase 1 (which it should be ) then there should be nothing for the ISA server to stop as the response to the Phase 1 neg uses the orginal session. The only thing I can think off is that that the ISA server is configured to Proxy rather than packet filter.....
Jeff
#37
Scooby Regular
David
What happens if you drop the ISA server and just run the box as a router (with IP Forwarding enabled) ? This should isolate if its an issue with the VPN client or ISA.
Jeff
What happens if you drop the ISA server and just run the box as a router (with IP Forwarding enabled) ? This should isolate if its an issue with the VPN client or ISA.
Jeff
Thread
Thread Starter
Forum
Replies
Last Post
hardcoreimpreza
Computer & Technology Related
21
11 October 2015 03:40 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM