Water leak in car on 97 Classic
19 January 2018 | 11:28 AM
Joined: Aug 2006
Posts: 23,761
Likes: 8
From: Leicester
Quote:
Originally Posted by
ossett2k2
Oem is 205/50/16 unless it's a yank version who use 55
I know that was the tyre size for the MY99/00 cars, for sure.
Rick, if the above is also the case for the MY97/98 cars, then best to go for 215/
40 R17 instead...
OEM 205/50 R16 R.C. = 1922mm
215/40 R17 R.C. = 1898mm
Last edited by joz8968; 19 January 2018 at 11:32 AM .
19 January 2018 | 11:41 AM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
Mine is a 1997 model .I already have 215/40/17 tyres .So should I stay on them
19 January 2018 | 11:59 AM
Joined: Aug 2006
Posts: 23,761
Likes: 8
From: Leicester
Quote:
Originally Posted by
Rick2017
Mine is a 1997 model .I already have 215/40/17 tyres .So should I stay on them
If it was me, then I would, regardless (unless they happen to be plastic ditchfinders).
19 January 2018 | 12:52 PM
Joined: Jun 2002
Posts: 40,781
Likes: 27
From: Rl'yeh
Me too. Mine is a 98 car.
I went to 17's since the 16" tyre size chosen by Subaru was relatively rare, and thus, more expensive to buy.
In fact my FIRST set of 215/40 17's plus new 17" WRX wheels cost the same as a new set of the 16's would have cost for just tyres!!!
19 January 2018 | 02:01 PM
Joined: Aug 2006
Posts: 23,761
Likes: 8
From: Leicester
Yeah, agreed. Plus the lower 40 profile looks great over the 45 (with hardly any payoff in ride comfort).
Last edited by joz8968; 19 January 2018 at 06:47 PM .
22 January 2018 | 12:14 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
I shall do that then.Also found my water leak.Its the windscreen 🙄
22 January 2018 | 12:39 PM
Joined: Jul 2006
Posts: 1,460
Likes: 1
From: Newport Pagnell
Nice one.
Not sealed properly? How you gonna sort it?
22 January 2018 | 12:43 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
Not sealed properly.Pulled back the a pillar trim and you could see it running from the top of the screen 🙄 I've put some tiger seal on so will see how it goes
22 January 2018 | 08:42 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
I'm having a new screen fitted on Friday now .After thinking about it I'm just papering over cracks
23 January 2018 | 02:31 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
I recieved my brand new hazard switch and it will only work if I press the switch half way 🙄 starting to irritate me now
26 January 2018 | 04:13 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
Had the new screen fitted today.The old one was knackered he just pushed the old screen out 😳
26 January 2018 | 08:38 PM
Joined: Aug 2006
Posts: 23,761
Likes: 8
From: Leicester
What was the rust like in the frame (if any)?
26 January 2018 | 08:48 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
I was lucky just light surface rust.It got wired brushed ,rust protector and primed.Before installation using pilkington glass
26 January 2018 | 09:12 PM
Joined: Mar 2009
Posts: 119
Likes: 0
From: Farnborough
Take the switch apart and see what's going on....
I took mine apart to replace the bulb,some thing might be adrift inside.
26 January 2018 | 09:51 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
Quote:
Originally Posted by iain710
Take the switch apart and see what's going on....
I took mine apart to replace the bulb,some thing might be adrift inside.
It's a brand new switch
27 January 2018 | 08:55 PM
Joined: Mar 2009
Posts: 119
Likes: 0
From: Farnborough
Ahh...didn't realise.
Send it back.
27 January 2018 | 10:23 PM
Thread Starter
Joined: Jan 2018
Posts: 616
Likes: 1
From: Stockport
Quote:
Originally Posted by iain710
Ahh...didn't realise.
Send it back.
Could do I surpose
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
stevekoz
General Technical
2
25 June 2017 09:04 PM
KieranWRX
General Technical
4
08 August 2011 10:54 PM
The Gentleman
General Technical
4
20 July 2011 06:27 PM
thewhitewarrior
General Technical
6
07 May 2011 02:37 PM