Dave Y

iTrader: (52)

I managed to get it fitted.Not perfect but its on there.
We used Yankuirui weather sealant 3mm thick . Ideal and no mess.
Only downside was i let the spoiler slip and it scratched the bootlid.
Oh Dear or words to that effect.
Thanks to all who gave advice etc
Thanks Don

jaygsi

iTrader: (46)

At least boot lids are easy to come by loads out there.

Dave Y

iTrader: (52)

I have managed to find one tonight which doesn’t need spraying. I will be very careful swapping them

alcazar

iTrader: (2)

First off your spoiler looks genuine. The brake light fitting is a clue.
Second, the bolts are different lengths for different models of STi, V4, V5 etc. ICP explains.
Thirdly, if you can get hold of some NON-SETTING mastic, such as is used yo bed awning rails onto caravans, use that yo seat and seal it.
Remember a bead round where the brake light wires go through, and a ring round every hole.
Don't use Sikaflex or Tiger flex to mount it...if it ever does need removed, you can't 🙁

Dave Y

iTrader: (52)

I used a caravan sealant

jaygsi

iTrader: (46)

Of a Bugeye?

Dave Y

iTrader: (52)

It has a lot more holes very similar to the spoiler