pre97 diagnostic port connectors
#31
Group Buy - Status Update
Order to date :
29 Shells
160 Pins (approx).
Based on this & average of 5 pins per shell, the number to make the group buy a goer is:
14 Shells
70 Pins (approx)
Chris
Order to date :
29 Shells
160 Pins (approx).
Based on this & average of 5 pins per shell, the number to make the group buy a goer is:
14 Shells
70 Pins (approx)
Chris
#32
Scooby Regular
Chris - If I say that I will purchase the remainder needed to complete the group buy, can you let me know how much that would cost me ?
Need to make a start on building hardware, want to play with the ECU over Xmas....
Paul Houbart
Gecko Motorsport
Need to make a start on building hardware, want to play with the ECU over Xmas....
Paul Houbart
Gecko Motorsport
#33
Scooby Regular
iTrader: (1)
Paul... do you have an eprom programmer? If not and you want to have a play with the maps etc have a look at willem eprom programmer .
These are pretty cheap but very cheap (just over £45 delivered) when you just buy the kit and build it up.... if your interested we could buy a couple but would you be interested in building them up as im useless at that sort of thing! I've spoke to the guy and it would take about 4 days for delivery. Let me know what you think.... plus i need some more NF off you so i'll be in touch soon.
Tony.
These are pretty cheap but very cheap (just over £45 delivered) when you just buy the kit and build it up.... if your interested we could buy a couple but would you be interested in building them up as im useless at that sort of thing! I've spoke to the guy and it would take about 4 days for delivery. Let me know what you think.... plus i need some more NF off you so i'll be in touch soon.
Tony.
#35
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Tony... If you want it building, give me a shout and ill do it for you... ive just built mine.. took about an hour.
David
David
#36
Scooby Regular
Tony -
Probably best let David do it - at least if I get it wrong, I've only screwed mine up !
Tony, re: NF, just let us know where and when, plenty in stock. Large bottles and single shot, as well.
Chris, we should have the required number of buyers now, if you can give me that price !
Paul Houbart
Gecko Motorsport
Probably best let David do it - at least if I get it wrong, I've only screwed mine up !
Tony, re: NF, just let us know where and when, plenty in stock. Large bottles and single shot, as well.
Chris, we should have the required number of buyers now, if you can give me that price !
Paul Houbart
Gecko Motorsport
#38
Apologies all for the slow response.
For the last few days I have been trying to place an order - it appears that the distributor's MOQ for pins changes on a minute by minute basis (1 - 500 - 1K - 5K ) & dependant on whom you speak to in sales [img]images/smilies/mad.gif[/img]
I have even spent half a day speaking to TYCO/AMP UK direct & have gone through ALL their other UK distributors without success.
Which brings me back to the original distributors , however, having bypassed sales & by talking to "Tech Support" I am now considering possible alternative compatible pins for my "Project's Protoype Production Run" which, upon success, will of course lead on to a regualar large order - for which the distribtor is trying to negotiate a free sample of 500 pins
Wish me luck - I'll keep you posted.
Chris
[Edited by Chris.Palmer - 11/25/2002 9:48:14 PM]
For the last few days I have been trying to place an order - it appears that the distributor's MOQ for pins changes on a minute by minute basis (1 - 500 - 1K - 5K ) & dependant on whom you speak to in sales [img]images/smilies/mad.gif[/img]
I have even spent half a day speaking to TYCO/AMP UK direct & have gone through ALL their other UK distributors without success.
Which brings me back to the original distributors , however, having bypassed sales & by talking to "Tech Support" I am now considering possible alternative compatible pins for my "Project's Protoype Production Run" which, upon success, will of course lead on to a regualar large order - for which the distribtor is trying to negotiate a free sample of 500 pins
Wish me luck - I'll keep you posted.
Chris
[Edited by Chris.Palmer - 11/25/2002 9:48:14 PM]
#52
Scooby Regular
Join Date: Sep 1999
Location: In the garage or in bed
Posts: 7,278
Likes: 0
Received 0 Likes
on
0 Posts
I may be thick but whats all this all about then?
Whatever it is will I get somthing like a display for me dash?
Huxley "Retard"
Paul "Gecko" can you call me and tell me what this is about??
Whatever it is will I get somthing like a display for me dash?
Huxley "Retard"
Paul "Gecko" can you call me and tell me what this is about??
#53
Scooby Regular
Join Date: Mar 2001
Location: Glos UK. - Manufacturers of ECU Data Monitors.
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
I chased our supplier up on this today as they promised delivery during January, as seems par for the course these days i didn't get a reply, i will make sure i have a update from them tomorrow.
simon
simon
#54
Scooby Regular
Join Date: Mar 2001
Location: Santiago, Chile
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I was going to ask the same thing that Huxley already brought up. What are these connectors for? I assume they have something to do with DIY mapping... are these to eventually connect the ecu to a laptop and mess around with the mapping?
Sorry for the stupid question, but I don't understand much about this
Sorry for the stupid question, but I don't understand much about this
#56
Scooby Regular
Join Date: Mar 2001
Location: Glos UK. - Manufacturers of ECU Data Monitors.
Posts: 1,529
Likes: 0
Received 0 Likes
on
0 Posts
I now have 100 shells and 1000 crimps .
Shells - £1.70 each
Crimps - £0.15 each
Delivery - £0.75 per order
Mail me at sales@psi3.co.uk
simon
Shells - £1.70 each
Crimps - £0.15 each
Delivery - £0.75 per order
Mail me at sales@psi3.co.uk
simon
#58
Scooby Regular
Simon -
I'm down for 6 shells, and 36 crimps. Could you put them aside for me, and we'll sort it out when I get down to you ! Should be this week, I've finally got my courtesy car!
[Edited by BoxerFlat4 - 2/17/2003 5:04:23 PM]
I'm down for 6 shells, and 36 crimps. Could you put them aside for me, and we'll sort it out when I get down to you ! Should be this week, I've finally got my courtesy car!
[Edited by BoxerFlat4 - 2/17/2003 5:04:23 PM]
#60
Big Big Thanks to Simon & his companies purchasing power for forcing the goods from the supplier - despite their knack for losing orders & changing minimum order quantities on an hour basis!
Cheers m8 your help is well appreciated.
Chris
Cheers m8 your help is well appreciated.
Chris