Injector sources and info
#91
Former Sponsor
Join Date: Jul 2005
Location: Wellingborough, Northamptonshire
Posts: 2,859
Likes: 0
Received 0 Likes
on
0 Posts
This became a very useful reference to those wanting to make money from my work, rather than a means for everyone to get their own cheap injectors, at a time when 550s were £550.
If someone wants info or replacement parts for the fitting kits I used to do for the denso 550s, or adaptor kits for phase 2 injectors to fit phase 1 rails I am happy to take direct enquiries.
Paul
If someone wants info or replacement parts for the fitting kits I used to do for the denso 550s, or adaptor kits for phase 2 injectors to fit phase 1 rails I am happy to take direct enquiries.
Paul
#92
No worries Paul, thanks for all this that you have done for the community, certainly helped me out! I understand your concerns and respect that.
Sorted now, but for for info :
I was looking for some info on the adaptor kit I had off you as when I replaced a 2nd leaking injector ( 550 denso - the top spacer ring had been fitted upside down so the chamfer was not facing the injector top and fitting screw pressure had cracked the top plastic cap on the injector in half .. hence one of the fuel leaks!! ) so I would refit the parts in my phase 1 rails the right way around.
Once out of the fuel rail the problem was obvious and so in went a new 550 injector with the kit resealed ( thanks ) and fitted correct way around. No leak here now!!
Cheers
Neil
Sorted now, but for for info :
I was looking for some info on the adaptor kit I had off you as when I replaced a 2nd leaking injector ( 550 denso - the top spacer ring had been fitted upside down so the chamfer was not facing the injector top and fitting screw pressure had cracked the top plastic cap on the injector in half .. hence one of the fuel leaks!! ) so I would refit the parts in my phase 1 rails the right way around.
Once out of the fuel rail the problem was obvious and so in went a new 550 injector with the kit resealed ( thanks ) and fitted correct way around. No leak here now!!
Cheers
Neil
Thread
Thread Starter
Forum
Replies
Last Post