my car with the number plate relocated
#31
I was thinking of doing something similar by removing the LH foglamp, bolting some slotted metal strips to the boltholes for it (there are four holes) and bending in a similar fashion to allow a square numberplate to be put in place of the foglamp. I'll post pics if/when I do it.
#33
Scooby Regular
Join Date: Apr 2000
Location: Warrington
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
I mounted mine in an EVO style for a while. I was bored at work and decided to make a bracket to fit in the foglamp location holes.
I did make a few prototypes before i got it right though, it had to be spaced out just right, and angled to make the plate fit flush with the bumper angle.
Phil.
#34
Maybe I won't then -- seeing it has made me go off the idea. I think that unlike an Evo there just isn't enough room between the radiator grille hole and the indicators to make it look OEM -- unless you use a motorbike-sized plate, but the idea was to keep the spacing legal.
#35
cheers marty
the rear wing is a scoobysport rear wing . gald you linked the car.
kevin the my number plate is fitted very similer to yours but the prakets fix on the under side of the bumper, i don't have that bit you have fixed your number on no more
sam
the rear wing is a scoobysport rear wing . gald you linked the car.
kevin the my number plate is fitted very similer to yours but the prakets fix on the under side of the bumper, i don't have that bit you have fixed your number on no more
sam
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM