Puff The Magic Wagon!

iTrader: (2)

Palatine

Sorry m8 - no "process pics" but

Heat up soldering iron, apply to pins on u/side of pcb of 1 LED. Use soldering iron to push the pins out, with a gentle tug on the led/slieve. When out, slip the rubber slieve off the end of the LED and bend outwards from 1/3 up the leg that came from the side nearest the edge. Repeat for all 5 LEDs. Obtain wire in 2 different colours. Use one colour for the edge side to the bent pins and the other for the inner to the straight pins. This is to preserve the correct polarity otherwise no lighting up I used a cordless drill/screwdriver to twist the 2 lengths of wire together, just to be tidy. Again repeat for all 5 LEDs. Give yourself about 20 inches of wire to be on the safe side for each LED extension. The other end, is a question of marking accurately the holes where you want them, drilling out and inserting LED holders (6p each from Maplins), then the LEDs into them (in the correct order ). Route wiring under dash and all done.

PALATINE

Cheers Puff

kevin09

sesor and connector kit recieved thanks 2 every1 involved very much appreciated cheers lads

Buzzer

Great News ! ! The knocklinks will be ready for delivery by Tuesday 18th November

There are five already in Stock so that means:

P1JON
Dazza 01
Buzzer
GameMan
Sc00by 57

Can all the above named please phone up Richard at Jap Innovations on 0161 652 0920 now and pay for their knocklinks and have them this week

PTMW or WRX_Rich, if you need yours that urgent i will let you have my slot for the knocklink so that you can have yours this week. Let me know.

The other 30 peeps, i have been told that Jap nnovations will have the rest by next Tuesday.

Please all note that Rich Wilde will be posting here shortly, he's from Jap Innovations and will be liasing between SN and myself to get all this wrapped up ASAP.

Please remember that credit card transactions will attract a 2% surcharge so Cheques or Debit Cards would be best

The price remember for the knocklink delivered is £78.00


Any questions please post here


Pete

[Edited by Buzzer - 11/12/2003 10:31:42 AM]

NM

Hi Guys

When you have got your Knocklink sorted wonder over to the

Power Engineering UK MY97-00 Phase 2 ECU Upgrade group buy

Cheers

Neal






[Edited by NM - 11/12/2003 11:05:41 PM]

SCOOBYD00

Missed it..






[Edited by SCOOBYD00 - 12/24/2003 11:51:18 AM]

sharp76

Put me down for a knock link and sensor mate

cheers

LEUVEN

^^^LOL^^^