GROUP BUY ON MUDFLAPS
#94
Scooby Regular
I've got loads to do on my car.
Fit:-
Autometer boost, AFR, oil temp, oil press
Knocklink
K&N induction
"Prodrive" Sunstrip
Mudflaps
HKS SSQV (when it arrives from the GB)
Good clean and polish
All before the 26th Jan when the car gets a TEK 2 re-map.
#98
Scooby Regular
Join Date: Jun 2002
Location: Nottingham
Posts: 5,285
Likes: 0
Received 0 Likes
on
0 Posts
one thing to bear in mind-
I bought the TSL flaps (which look identical to the ScottLowe ones- doh) and they were fitted to my car (which has eibachs) and on the lowest fixing the flaps DO catch the ground quite a lot under braking and hard cornering..
I have already worn off the TSL wording partially on the fronts
BUT the sides off the car are so much cleaner and the flaps catch nearly all the cr@p off the road..
I bought the TSL flaps (which look identical to the ScottLowe ones- doh) and they were fitted to my car (which has eibachs) and on the lowest fixing the flaps DO catch the ground quite a lot under braking and hard cornering..
I have already worn off the TSL wording partially on the fronts
BUT the sides off the car are so much cleaner and the flaps catch nearly all the cr@p off the road..
#99
I have mine here and am waiting to fit them, my cars on cusco coilovers and is a lot lower than standard. Cany ou trim the flaps so they are shorter and wont drag then?
#100
Scooby Regular
Should be fitting mine tomorrow. My daughter is ill and her Creche won't take her for 48 hours so I've got to take the day off tomorrow to look after her. Hopefully I can find someone to look after her for a couple of hours while I fit them - shouldn't take more than half hour a corner.
Cashy - Just in case I don't get on here tomorrow, happy B'Day mate for tomorrow.
#101
Scooby Senior
Well figners crossed should e getting them tomorrow to but think wont be fitting them for a few days as its bloody snowing and I mean snowing covered the main road in 15 minutes.
#102
Scooby Regular
Fittted my flaps today
Started at 1.45pm and finished RH front by about 3pm! fitted the remaining 3 by 4pm. Main reason for No1 taking so long was due to a 10 minute panic that the previous owner had lost the wheelnut lock key to undo locknut thingy. On my MY00 the lower front OE pin that holds the wheel arch inner is a push fit so opened the door and pushed it out with a long screwdriver - this took a while to work out and I didn't want to force anything.
ould find no other way to keep supplied "plastic shrouded" nuts to stay where they were on wheel arch without tape A "must have" for this job IMHO.
With No1 done, knowing how to remove everything and how to keep the nuts from falling into the side skirt, No2 took about 20 minutes from start to finish. Wasn't too sure what I should be Waxoyl'ing so used some under body paint I had spare to cover holes drilled and a bit on the screws to prevent corrosion. All other bolts got a bit of copper grease for some protection.
Rears were straight forward. Bolted the small bracket in place first then offered up the flap and large bracket. Bolted those together and with the bracket in place carefully drilled out the top most hole.
Have to say it looks really good and I'm soo glad I've got some decent protection for those vunerable (SP) areas.
If anyone needs any help, I'm happy to help if I can.
#104
Scooby Senior
Still havent got mine yet and they were meant to be sent on Wednesday according to Scott. Mind you what a guy as soon as I mailed him that they hadnt turned up he was on the phone to me and telling me he would check up on them and offering 50 % discount if I dont get them tomorrow. LOL
#107
Scooby Senior
You mean you have sent them with white van man and not a owner of a legacy. Mind you I am still surprised that the White van man cant get here they get everywhere normally three inches infront of the rear bumper LOL. Seriouasly did you have any luck mate. And did you get the picture of the Triple meter Hood i Sent you
#111
Scooby Regular
Join Date: Dec 2003
Location: Glasgow
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
Fitted mine on Saturday.
Looks fantastic! Get yourself some Waxoyl and you can use it to patch up the underseal that has flaked off as well!
Also, when fitting the 2 plastic brackets on the front flaps, in behind the plastic liner, use a bit of tape at the side of the bracket, to stop it from sliding off into the cavity between the liner and the sill.
[Edited by Subarstar - 1/19/2004 4:57:04 PM]
Looks fantastic! Get yourself some Waxoyl and you can use it to patch up the underseal that has flaked off as well!
Also, when fitting the 2 plastic brackets on the front flaps, in behind the plastic liner, use a bit of tape at the side of the bracket, to stop it from sliding off into the cavity between the liner and the sill.
[Edited by Subarstar - 1/19/2004 4:57:04 PM]
#113
Scooby Senior
Got mine today woo hoo hoo. Still havent seen them yet but according to my dad who signed for them they look good and should have them fitted before the end of the week. Waxoyl form Halfords
#116
Scooby Regular
Join Date: May 2003
Location: Hertfordshire
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Mine arrived on the 16th - quality looks good. Fitting will be wait until I've painted the stainless fixings black, probably tommorow Got the new wheels to go on as well, will post up pics when I'm done.
Rich
Rich