Origin B2
#31
Scooby Regular
iTrader: (1)
Join Date: Jun 2000
Location: Essex
Posts: 2,818
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by messiah
does the B2 record stuff like max high speed etc?
#35
Just for info, had the Road Angel "Classic", now have O-b2...far better. Has more tailoring features if you want them, but they don't get in the way. Not difficult to fit (as mentioned by several others). Database seems to be FAR more up to date the RA (quite honestly, RA's left me wondering sometimes, as it appeared I was the only one submitting new sites!), and the b2 has an automatic alert that reminds you to update the unit....simple connector that has its own power feed, that then goes into COM1 serial port....just remember, if you're upgrading from RA to b2, remove the RA s/w (it auto starts in Windows System Tray, thus blocking COM1 port for itself, therefore preventing Origin s/w from seeing attached b2 device...easy "gotcha")
Finally (my 0.02 worth), its far easier than connecting/disconnecting wires to the unit each time (primary reason for me swapping)....can't fault it.
HTH,
Spen
Finally (my 0.02 worth), its far easier than connecting/disconnecting wires to the unit each time (primary reason for me swapping)....can't fault it.
HTH,
Spen
#36
Spen,
That sounds like you can't have both sets of software on at the same time or is it possible to stop the RA auto-loading to the systray and only fire it up when needed from the desktop?
I was thinking of getting a b2 and giving my RA to my old man for his car so would need to keep updating both units...
How readable is the b2 display in sunlight and does it reflect onto the screen at night if you have it on the dash? Is it adjustable for viewing angle? I made a shade for my RA classic and the new version has one in the kit AFAIK so they've acknowledged the "problem"
TIA
Andy
PS unless the current g/b is going to last until the pda data cable comes out in October-ish or later, count me out for now
I don't fancy running the scoob with both units on the dash as a look-see to find out if it works - it's already like Blackpool illuminations with the gauges
That sounds like you can't have both sets of software on at the same time or is it possible to stop the RA auto-loading to the systray and only fire it up when needed from the desktop?
I was thinking of getting a b2 and giving my RA to my old man for his car so would need to keep updating both units...
How readable is the b2 display in sunlight and does it reflect onto the screen at night if you have it on the dash? Is it adjustable for viewing angle? I made a shade for my RA classic and the new version has one in the kit AFAIK so they've acknowledged the "problem"
TIA
Andy
PS unless the current g/b is going to last until the pda data cable comes out in October-ish or later, count me out for now
I don't fancy running the scoob with both units on the dash as a look-see to find out if it works - it's already like Blackpool illuminations with the gauges
#37
Scooby Regular
Join Date: Jul 2003
Location: Surviving as a soldier of fortune on the Los Angeles underground...
Posts: 7,181
Likes: 0
Received 0 Likes
on
0 Posts
1. Tuscan57
2. Rigpig
3. Hales ( price for additional cradle as well ? ..two cars.. )
4. Messiah
Took list from last I could see - if incorrect please amend.
ps - when is purchase date?
2. Rigpig
3. Hales ( price for additional cradle as well ? ..two cars.. )
4. Messiah
Took list from last I could see - if incorrect please amend.
ps - when is purchase date?
#38
Originally Posted by Apple
Spen,
That sounds like you can't have both sets of software on at the same time or is it possible to stop the RA auto-loading to the systray and only fire it up when needed from the desktop?
I was thinking of getting a b2 and giving my RA to my old man for his car so would need to keep updating both units...
How readable is the b2 display in sunlight and does it reflect onto the screen at night if you have it on the dash? Is it adjustable for viewing angle? I made a shade for my RA classic and the new version has one in the kit AFAIK so they've acknowledged the "problem"
TIA
Andy
PS unless the current g/b is going to last until the pda data cable comes out in October-ish or later, count me out for now
I don't fancy running the scoob with both units on the dash as a look-see to find out if it works - it's already like Blackpool illuminations with the gauges
That sounds like you can't have both sets of software on at the same time or is it possible to stop the RA auto-loading to the systray and only fire it up when needed from the desktop?
I was thinking of getting a b2 and giving my RA to my old man for his car so would need to keep updating both units...
How readable is the b2 display in sunlight and does it reflect onto the screen at night if you have it on the dash? Is it adjustable for viewing angle? I made a shade for my RA classic and the new version has one in the kit AFAIK so they've acknowledged the "problem"
TIA
Andy
PS unless the current g/b is going to last until the pda data cable comes out in October-ish or later, count me out for now
I don't fancy running the scoob with both units on the dash as a look-see to find out if it works - it's already like Blackpool illuminations with the gauges
I can get the B2 for when ever you want it mate.
#49
b2
Originally Posted by MattW
Aps - are you a certified b2 retailer?
You get all the usual benefits,6 months subs and warranty.
#50
Good - I see that origin now limit the warranty to 28 days if the seller is not approved.
Can you pm me details of where to send cheque or if transaction can be done via card over phone\online.
Can you pm me details of where to send cheque or if transaction can be done via card over phone\online.
#52
Scooby Regular
Join Date: Oct 2003
Location: 1994 WRX STI VERSION 1 No. 21/200
Posts: 2,803
Likes: 0
Received 0 Likes
on
0 Posts
APS,
Thanks very much for the prompt delivery - it is now registered and updated and I am goijng to install it tonight.
APS - nice guy and very helpful - thanks for the advice APS and for anyone else thinking about the deal - go for it - a genuine guy, from a known dealer/Origin Approved Reseller etc.
Brian
Thanks very much for the prompt delivery - it is now registered and updated and I am goijng to install it tonight.
APS - nice guy and very helpful - thanks for the advice APS and for anyone else thinking about the deal - go for it - a genuine guy, from a known dealer/Origin Approved Reseller etc.
Brian
#54
Scooby Regular
Join Date: Jul 2003
Location: Surviving as a soldier of fortune on the Los Angeles underground...
Posts: 7,181
Likes: 0
Received 0 Likes
on
0 Posts
I'll second that - Cheers Aps
Had the B2 in for just over a week now, installation was easy, even for me - the hardest part was deciding where to run the cables.
Received the unit about a week after I posted the cheque - and Aps had included the dealer code required to register with Origin.
Really pleased with it - although there is the temptation to go looking for speed traps to test the thing! I've already found 2 DS2 camera's that I didn't know about...
A couple of minor probs but these are easily resolved I gather - the unit needs stronger magnets to hold it in the cradle better - i travel over a lot of v rough roads and although it doesn't jump out much it tends to reset if I knock it with my hand or try to use the menu's while driving. The only other thing is siting - I've placed mine next to the ashtray (MY00) and TBH this is a little too out of sight - I might try repositioning it on top of dash in the near future.
I think this little unit is a bargain - cheers Aps.
Had the B2 in for just over a week now, installation was easy, even for me - the hardest part was deciding where to run the cables.
Received the unit about a week after I posted the cheque - and Aps had included the dealer code required to register with Origin.
Really pleased with it - although there is the temptation to go looking for speed traps to test the thing! I've already found 2 DS2 camera's that I didn't know about...
A couple of minor probs but these are easily resolved I gather - the unit needs stronger magnets to hold it in the cradle better - i travel over a lot of v rough roads and although it doesn't jump out much it tends to reset if I knock it with my hand or try to use the menu's while driving. The only other thing is siting - I've placed mine next to the ashtray (MY00) and TBH this is a little too out of sight - I might try repositioning it on top of dash in the near future.
I think this little unit is a bargain - cheers Aps.
#55
Scooby Regular
Join Date: Mar 2004
Location: In hiding........
Posts: 7,852
Likes: 0
Received 0 Likes
on
0 Posts
sorry never got back about this! i still havent sold the tuscan yet! if i manage to sell i will defo be interested in a new b2! how about extra car kits have you any?
steve
steve
#56
Extra cradles
My supplier has got the second car cradles in stock.
He also has the LRC 100 laser jammers(garage door opener) in stock and will be doing these at good rates.
He also has the LRC 100 laser jammers(garage door opener) in stock and will be doing these at good rates.
#58
messiah thanks for your kind words mate.;]
I had the same probs with mine resetting and i altered the angle of unit so it sits more upright,you dont need to look at because it usually scares the s**t out of me when it goes off!!
Soon as i get prices i will post them up Steve.
I had the same probs with mine resetting and i altered the angle of unit so it sits more upright,you dont need to look at because it usually scares the s**t out of me when it goes off!!
Soon as i get prices i will post them up Steve.
Thread
Thread Starter
Forum
Replies
Last Post