Just had car mapped at scoobyclinic.....what a difference!!
08 June 2006, 12:52 PM
#32
Scooby Regular
Join Date: Feb 2006
Location: Anywhere theres Carp
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by The Gaffer
Hi,
to set matters straight we charge £550.00 for a tech 3 re-map including the initial licence fee of £150.00, rolling road is charged at £75.00 for the first hour and £50.00 per hour thereafter, we usually end up at a deal price of £100.00, for that you get a run before we carry out any mods giving us a base figure to start with, as we map it you get a number of runs untill its finished, depending on the car it can take as few as 12 runs but if the car has problems we can do as many as 40 + runs, we then finalise on the road.
Hope this clears up a few things,
by the way I reply to all Emails daily, in the unlikly event of any one not getting a reply please ring, if you get the answer phone simply leave a message and we will get back to you.
Cheers,
Kev.
to set matters straight we charge £550.00 for a tech 3 re-map including the initial licence fee of £150.00, rolling road is charged at £75.00 for the first hour and £50.00 per hour thereafter, we usually end up at a deal price of £100.00, for that you get a run before we carry out any mods giving us a base figure to start with, as we map it you get a number of runs untill its finished, depending on the car it can take as few as 12 runs but if the car has problems we can do as many as 40 + runs, we then finalise on the road.
Hope this clears up a few things,
by the way I reply to all Emails daily, in the unlikly event of any one not getting a reply please ring, if you get the answer phone simply leave a message and we will get back to you.
Cheers,
Kev.
08 June 2006, 12:55 PM
#33
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by The Gaffer
Hi,
to set matters straight we charge £550.00 for a tech 3 re-map including the initial licence fee of £150.00, rolling road is charged at £75.00 for the first hour and £50.00 per hour thereafter, we usually end up at a deal price of £100.00, for that you get a run before we carry out any mods giving us a base figure to start with, as we map it you get a number of runs untill its finished, depending on the car it can take as few as 12 runs but if the car has problems we can do as many as 40 + runs, we then finalise on the road.
Hope this clears up a few things,
by the way I reply to all Emails daily, in the unlikly event of any one not getting a reply please ring, if you get the answer phone simply leave a message and we will get back to you.
Cheers,
Kev.
to set matters straight we charge £550.00 for a tech 3 re-map including the initial licence fee of £150.00, rolling road is charged at £75.00 for the first hour and £50.00 per hour thereafter, we usually end up at a deal price of £100.00, for that you get a run before we carry out any mods giving us a base figure to start with, as we map it you get a number of runs untill its finished, depending on the car it can take as few as 12 runs but if the car has problems we can do as many as 40 + runs, we then finalise on the road.
Hope this clears up a few things,
by the way I reply to all Emails daily, in the unlikly event of any one not getting a reply please ring, if you get the answer phone simply leave a message and we will get back to you.
Cheers,
Kev.
Each car is different, and not all get to the rollers without problems. It's a critical job and has to be done properly.Ns04
It's like anything else, you pays your moeny, you takes your choice.
08 June 2006, 02:53 PM
#34
Scooby Regular
Join Date: Jan 2005
Location: Ex'e'er
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Tidgy
the only one i've seen much cheaper is the group buy price. 99% are around the same figure
I only say this because people reading this thread should be aware that you can get it done cheaper - and in my opinion probably just as good.
Added : There also seems to be a big difference between what you said you paid (£650+vat+£150rr) and what the Gaffer has listed (£550+vat+£100rr) - if you were charged the lower price then its not too bad.
Last edited by GrollySTI; 08 June 2006 at 03:01 PM.
08 June 2006, 03:30 PM
#35
Originally Posted by GrollySTI
No offence but you couldn't have looked very far - got mine done by a well known organisation for £550+vat incl rr time.I would also go as far as to say that at the time I did my research none of the quotes I got were as high as yours.
I only say this because people reading this thread should be aware that you can get it done cheaper - and in my opinion probably just as good.
Added : There also seems to be a big difference between what you said you paid (£650+vat+£150rr) and what the Gaffer has listed (£550+vat+£100rr) - if you were charged the lower price then its not too bad.
I only say this because people reading this thread should be aware that you can get it done cheaper - and in my opinion probably just as good.
Added : There also seems to be a big difference between what you said you paid (£650+vat+£150rr) and what the Gaffer has listed (£550+vat+£100rr) - if you were charged the lower price then its not too bad.
08 June 2006, 09:08 PM
#36
Scooby Regular
Enginetuner.co.uk charge £650 inc vat and rolling road time for the first map...As earlier stated a 3 port soilenoid or boost controller are required to get the best results...
Subsequent mapping is charged at £120 for the first hour (£60 for dyno and £60 for labour) and £60 an hour for every hour required after that..
Subsequent mapping is charged at £120 for the first hour (£60 for dyno and £60 for labour) and £60 an hour for every hour required after that..
09 June 2006, 10:02 AM
#39
Scooby Regular
at the time of mine being mappped i went to several places around mids and they all were there or there abouts, bear in mind this was at the time i looked not now, since the prices have all come down.
car mapping
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
