ESC Nitro racing!!
#62
Scooby Regular
Join Date: Mar 2006
Location: MSOC<^>Jαкέ01
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
take it you didnt read my post john
john be careful running your car on 30% nitro it can blow up some engines should be ok in yours though (should be) just make sure you dont run it to lean
john be careful running your car on 30% nitro it can blow up some engines should be ok in yours though (should be) just make sure you dont run it to lean
#63
Scooby Regular
Join Date: Mar 2006
Location: MSOC<^>Jαкέ01
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Cornelius
it hasn't even been started yet, only just finished building it
HOW TO RUN IN YOUR CAR
step 1: put a tank in and let it run on the spot.
step 2: let it cool down then put another tank though on the spot then let it cool down again.
step 3: now put it another tank and this time drive around but only take it to 1/4 throtle.
step 4: do the same but take it to 1/2 throtle this time.
step 5: do the same now you can take the car to full throtle but only for acouple of seconds.
you can now tune your can but dont make it run to lean or you will blow up your engine.
also m8 try to resist from going top speed for as long as you can. and now your running in is complete
jake01
#65
Essex Area Moderator
iTrader: (7)
If you guys are going anywhere but a circuit i wont be able to run.
I wont get enough heat in the tires on anything but a glass smooth circuit, even with traction additive!! Also my ride hights for tarmac are as follows
4.5mm front
4.75 - 5mm rear.
Like i said before though i dont expect you guys to change the venue for me
I wont get enough heat in the tires on anything but a glass smooth circuit, even with traction additive!! Also my ride hights for tarmac are as follows
4.5mm front
4.75 - 5mm rear.
Like i said before though i dont expect you guys to change the venue for me
#66
guys, I'd love to join you for this as I'm a real novice with the toy I bought a few months ago, but I pi$$ myself laughing everytime I use it, its mental.
I bought a Hellfire, so it's more geared up for gravel/off road etc. would appreciate anyone showing me the ropes as I'm just muddling along....
chrs, Malc
<I'm also on hols on 6th Aug so anything before would be great>
I bought a Hellfire, so it's more geared up for gravel/off road etc. would appreciate anyone showing me the ropes as I'm just muddling along....
chrs, Malc
<I'm also on hols on 6th Aug so anything before would be great>
#67
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jake01
take it you didnt read my post john
john be careful running your car on 30% nitro it can blow up some engines should be ok in yours though (should be) just make sure you dont run it to lean
john be careful running your car on 30% nitro it can blow up some engines should be ok in yours though (should be) just make sure you dont run it to lean
thanx for the tips...done that as stated in the manual ..............
kept blowing a glow plug every time it started up....and found it to be metal in the piston loose
Last edited by John1uk; 12 July 2006 at 11:18 PM.
#69
Scooby Regular
Join Date: Aug 2005
Location: Southend
Posts: 3,315
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jake01
ok cool
i take it they are guna repair it for free m8
i take it they are guna repair it for free m8
#71
Scooby Regular
iTrader: (2)
Originally Posted by WRX_Dazza
simon i have a gs storm buggy, kyosho mad force monster truck and a kyosho v1s touring car if you want a bash!!!
i just need to get them out of storage and service them a bit!!
(left fuel in the storm from 8 months ago!!!) - nothing that a bit of WD wont cure!!!
Dazza
i just need to get them out of storage and service them a bit!!
(left fuel in the storm from 8 months ago!!!) - nothing that a bit of WD wont cure!!!
Dazza
ill ave some of that.
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM