HID Group Buy
#122
i ordered mine last night,i went for the 8000k as i like the blue tint,mine are going in the prodrive lights for my bugeye,hopefully they will fit no prob's,will let all know when i get them.
#123
Scooby Regular
Thread Starter
iTrader: (18)
Join Date: May 2006
Location: Middx / Herts / Bucks / Essex
Posts: 3,420
Likes: 0
Received 2 Likes
on
1 Post
Originally Posted by scooby1979
hey guys
just fitted my kit tonight, took about an hour and a half with the help of my two mates(thanks guys) as im just no good with wiring
the major problem we had was figuring out where to put the ballasts but otherwise it was not too bad at all. im very impressed with the lights, even took it down a country road and tested them out. amazing lighting and the car jus luks awesome at night. here is a pic i took tonight, a bit grainy as its from my mobile.
i ordered H4 hi/lo 8000k kit.
just fitted my kit tonight, took about an hour and a half with the help of my two mates(thanks guys) as im just no good with wiring
the major problem we had was figuring out where to put the ballasts but otherwise it was not too bad at all. im very impressed with the lights, even took it down a country road and tested them out. amazing lighting and the car jus luks awesome at night. here is a pic i took tonight, a bit grainy as its from my mobile.
i ordered H4 hi/lo 8000k kit.
Looks SUPERB!!!!
Can wait to order mine... need to get headlights and spots so 2 kits need to save up for! Wont bother with full beams as I hardly ever use them.
#124
Tracking Number
Hi Genuine - any chance of the tracking number - I paid on the 11th with a paypal subject of Subject: Scoobynet group buy 177.
Many thanks
Chris
Many thanks
Chris
#125
Scooby Regular
Join Date: Jul 2005
Location: Leicestershire
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Guys,
How does the kit work with the electrical adjuster for the headlights in a GC8 MY00 UK car? Thinking seriously of getting the H4 Bi-xenon kit but concerned about losing the height adjust etc.
How does the kit work with the electrical adjuster for the headlights in a GC8 MY00 UK car? Thinking seriously of getting the H4 Bi-xenon kit but concerned about losing the height adjust etc.
#127
Originally Posted by shailet
Guys,
How does the kit work with the electrical adjuster for the headlights in a GC8 MY00 UK car? Thinking seriously of getting the H4 Bi-xenon kit but concerned about losing the height adjust etc.
How does the kit work with the electrical adjuster for the headlights in a GC8 MY00 UK car? Thinking seriously of getting the H4 Bi-xenon kit but concerned about losing the height adjust etc.
I ordered mine weds and they arrived today,suprised how quick they arrived,just need to find time to fit them now.
#128
Originally Posted by Goon
Fitted mine today, I brought direct from the website before I saw this groupbuy.
Quality of the hardware is good, but beware of the lamp base!
The crappy spring clips on my £30,000 Legacy are held in place by the cheapest, flimsiest plastic ever!
When you try to put the lamp in place and reclip you may find that the clips don't fit around the base, meaning that you apply a little too much pressure and both my clip fixings snapped!
DO NOT FORCE THE SPRING CLIPS WHEN PUTTING THE NEW LAMP IN PLACE!!!
I've had to double bubble both my lamps in place as the spring clip fixings have both snapped, the Impreza may be different, but that's what the new Legacy's are like.
Now I need to hope that I can buy the plastic assembly behind the lamp on their own, if not I'll need two new headlamps! ****ing Jap cheapo crap!
Open the spring clips up a bit wider before trying to lock the lamp in place would be my advice, and don't force them!
My only other gripe is with the relay harness, but that might just be the way I interpreted the instructions.
Basically you can fit the kit in two ways,
1 - Fit the relay loom, this loom will then provide power and fuses that would prevent your original loom from frying should a ballast or lamp go short.
It takes longer this way, but it's worth it for peace of mind.
2 - Chuck the relay loom, plug the orignal lamp connector into the ballast, then the ballast to the new lamp. If something goes short you may have your loom melt if the original headlight fuses don't blow first.
My issue was that the relay loom does not plug straight into the lamp wiring.
The grommet has 4 wires, 2 for the lamp and 2 for the original headlamp plug to plug into, when you try and fit the relay loom it will go male to male (not male to female), so you'll have to solder and heat shrink the connections.
Because I didn't envisage needing heat shrink and I couldn't be arsed to drive to work I've wired it as option 2, directly to my original headlight loom. It works fine, but I'll finish the job properly tomorrow as it's easy enough to go from option 2 to option 1.
Quality of the hardware is good, but beware of the lamp base!
The crappy spring clips on my £30,000 Legacy are held in place by the cheapest, flimsiest plastic ever!
When you try to put the lamp in place and reclip you may find that the clips don't fit around the base, meaning that you apply a little too much pressure and both my clip fixings snapped!
DO NOT FORCE THE SPRING CLIPS WHEN PUTTING THE NEW LAMP IN PLACE!!!
I've had to double bubble both my lamps in place as the spring clip fixings have both snapped, the Impreza may be different, but that's what the new Legacy's are like.
Now I need to hope that I can buy the plastic assembly behind the lamp on their own, if not I'll need two new headlamps! ****ing Jap cheapo crap!
Open the spring clips up a bit wider before trying to lock the lamp in place would be my advice, and don't force them!
My only other gripe is with the relay harness, but that might just be the way I interpreted the instructions.
Basically you can fit the kit in two ways,
1 - Fit the relay loom, this loom will then provide power and fuses that would prevent your original loom from frying should a ballast or lamp go short.
It takes longer this way, but it's worth it for peace of mind.
2 - Chuck the relay loom, plug the orignal lamp connector into the ballast, then the ballast to the new lamp. If something goes short you may have your loom melt if the original headlight fuses don't blow first.
My issue was that the relay loom does not plug straight into the lamp wiring.
The grommet has 4 wires, 2 for the lamp and 2 for the original headlamp plug to plug into, when you try and fit the relay loom it will go male to male (not male to female), so you'll have to solder and heat shrink the connections.
Because I didn't envisage needing heat shrink and I couldn't be arsed to drive to work I've wired it as option 2, directly to my original headlight loom. It works fine, but I'll finish the job properly tomorrow as it's easy enough to go from option 2 to option 1.
The relay loom will plug straight into the ballast and the ballast straight into the bulb.
If anyone has used the relay loom can you explain if this is right.
#133
Originally Posted by BOB'5
Looking good.
Anybody know the weight of these units?
Anybody know the weight of these units?
Originally Posted by BOB'5
Also, do the kits replace the stock wiring completely and have their own fuse/relay?
You can come and take a look if you want, Bedford, as you know
#135
Originally Posted by BOB'5
Cheers Gerry.
Does the wiring rely on the std wiring for drawing power then or does it use its own to draw from battery?
Does the wiring rely on the std wiring for drawing power then or does it use its own to draw from battery?
#138
Originally Posted by BOB'5
Cheers.
Some budget systems draw power from the original wiring, which is not good.
Some budget systems draw power from the original wiring, which is not good.
For the price you can't really go wrong.
If you go onto the site you can purchase separate bulbs,ballast or the lot.
Last edited by mark6; 17 October 2006 at 11:17 PM.
#139
Scooby Regular
Join Date: Aug 2001
Location: Republic Of Mancunia
Posts: 2,474
Likes: 0
Received 0 Likes
on
0 Posts
Ordered
Genuine: Please can you make sure the order for Andrew Thompson (subject Group Buy Order) is shipped to the address in the text of the payment, and can you get me a traccking number once sent please? Thanks
Genuine: Please can you make sure the order for Andrew Thompson (subject Group Buy Order) is shipped to the address in the text of the payment, and can you get me a traccking number once sent please? Thanks
#140
Scooby Regular
Join Date: Aug 2001
Location: Republic Of Mancunia
Posts: 2,474
Likes: 0
Received 0 Likes
on
0 Posts
Excellent. I meant to change the paypal address, but forgot. No problems if you can't, the other address is home, there's just more chance of someone being in to collect it at the other (work) address.
Thanks for your help
Thanks for your help
#143
Scooby Regular
Join Date: Apr 2005
Location: Malta
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Received my kit today, and the results are good. I've taken the liberty and documented my installation to who ever might be interested.
https://www.scoobynet.com/lighting-o...ml#post6272491
Hope you appreciate the time I took to do this.
https://www.scoobynet.com/lighting-o...ml#post6272491
Hope you appreciate the time I took to do this.
#145
Scooby Regular
Join Date: Apr 2005
Location: Malta
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Also note that these kits come from china so you might get charged duty. Only got charged £7.50, which is not bad since the seller marked the items as a sample.
#150
Scooby Regular
iTrader: (12)
Join Date: Sep 2002
Location: Dorset
Posts: 966
Likes: 0
Received 0 Likes
on
0 Posts
Genuine,I ordered a H7 6000k kit for my daughters Golf,which arrived this week,but the box has a sticker on saying H7 8000k.I can't see any other markings on the bulbs to say what they are,it would be nice to know what they are for sure if I had to replace one at any time.
Cheers
Merv
Cheers
Merv