ANDY F REMAP GB IN MAY
10 May 2008, 08:05 PM
#124
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: RCT
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Good to hear all is has gone well,
My mate rob who you met in llandow is busting. His car has been idle for a few weeks now.
He's fitted a TD05 20g, 550 injectors, V8 intercooler, Fuel Lab FPR, APS large bore induction kit, 255 fuel pump. straight through up pipe. I think that's it.
You can imagine the difference he's going to see on his MY01 WRX bugeye.
Roll on Wednesday
My mate rob who you met in llandow is busting. His car has been idle for a few weeks now.
He's fitted a TD05 20g, 550 injectors, V8 intercooler, Fuel Lab FPR, APS large bore induction kit, 255 fuel pump. straight through up pipe. I think that's it.
You can imagine the difference he's going to see on his MY01 WRX bugeye.
Roll on Wednesday
10 May 2008, 10:38 PM
#126
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: RCT
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Cheers Rich. Let's hope the weather continues for next weekend too.
I'd forgotton what it was like fiddling with the car in nice warm sunshine,
a cold can and the radio on. And a good result
I still find it hard to believe that it was a plug
the symptoms appeared much more severe.
I was'nt planning anything for next weekend but if the remap goes well I'll probably end up at Japfest.
I'd forgotton what it was like fiddling with the car in nice warm sunshine,
a cold can and the radio on. And a good result
I still find it hard to believe that it was a plug
the symptoms appeared much more severe.I was'nt planning anything for next weekend but if the remap goes well I'll probably end up at Japfest.
12 May 2008, 04:55 PM
#127
Scooby Newbie
Join Date: Apr 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
lol,not long now folks,and yes rich im getting nervous and excited,im hoping it will feel like a new car after.
we will still be driving round cardiff 9am looking for the hotel.lol no we`ll be fine mate.
12 May 2008, 05:29 PM
#128
Scooby Regular
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Almost here guys Hope everyone is ready. 
Did the headers turn up after Chris?
Daz just to confirm i've got my figures correct
Map one of Andy's existing Apexi ecu's £195+vat=£229.12
Travelling costs of 2 days shared between 8 people £35
Gives me a price to pay of .....£264.13
Hope everyone is ready. Did the headers turn up after Chris?Daz just to confirm i've got my figures correct
Map one of Andy's existing Apexi ecu's £195+vat=£229.12
Travelling costs of 2 days shared between 8 people £35
Gives me a price to pay of .....£264.13
12 May 2008, 09:21 PM
#129
Scooby Regular
iTrader: (2)
Join Date: Jun 2005
Location: TAXI ANYONE!!
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
Almost here guys Hope everyone is ready. Did the headers turn up after Chris?
Daz just to confirm i've got my figures correct
Map one of Andy's existing Apexi ecu's £195+vat=£229.12
Travelling costs of 2 days shared between 8 people £35
Gives me a price to pay of .....£264.13
Hope everyone is ready. Did the headers turn up after Chris?Daz just to confirm i've got my figures correct
Map one of Andy's existing Apexi ecu's £195+vat=£229.12
Travelling costs of 2 days shared between 8 people £35
Gives me a price to pay of .....£264.13
12 May 2008, 09:33 PM
#130
Scooby Regular
Join Date: Apr 2008
Location: s.wales
Posts: 135
Likes: 0
Received 0 Likes
on
0 Posts
hi
taylor
hi m8 i just got hold of a power fc and hand thing ..it's for my year of car and its all good so what to do now
need some one to fit it and map it to help
alan
hi m8 i just got hold of a power fc and hand thing ..it's for my year of car and its all good so what to do now
need some one to fit it and map it to help
alan
12 May 2008, 11:34 PM
#131
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: RCT
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Yes Taylor, your figures seem correct. copy below of list of prices for all the guys.
Fingers crossed for you chris. I know the feeling after my little scare last week.
Again just to confirm. If anyone has a problem can you please let me know so that Andy is contacted. You can get me on my works mobile
Fingers crossed for you chris. I know the feeling after my little scare last week.
Again just to confirm. If anyone has a problem can you please let me know so that Andy is contacted. You can get me on my works mobile
12 May 2008, 11:35 PM
#132
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: RCT
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Prices did'nt post up???
To remap an existing Power FC is £280+v
Ecutek custom remap including licence for MY99- MY06 is £500+v
A remap of one of my previous Apexi/Ecutek maps is £195+v
To supply, fit and map a new Apexi PFC and Commander is £795+v
Travelling would be £200 for day 1 and £80 each subsequent day,
split between all persons.
i.e:
if 8 cars =£35 split
To remap an existing Power FC is £280+v
Ecutek custom remap including licence for MY99- MY06 is £500+v
A remap of one of my previous Apexi/Ecutek maps is £195+v
To supply, fit and map a new Apexi PFC and Commander is £795+v
Travelling would be £200 for day 1 and £80 each subsequent day,
split between all persons.
i.e:
if 8 cars =£35 split
12 May 2008, 11:36 PM
#133
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: RCT
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Prices did'nt post up???
To remap an existing Power FC is £280+v
Ecutek custom remap including licence for MY99- MY06 is £500+v
A remap of one of my previous Apexi/Ecutek maps is £195+v
To supply, fit and map a new Apexi PFC and Commander is £795+v
Travelling would be £200 for day 1 and £80 each subsequent day,
split between all persons.
i.e:
if 8 cars =£35 split
To remap an existing Power FC is £280+v
Ecutek custom remap including licence for MY99- MY06 is £500+v
A remap of one of my previous Apexi/Ecutek maps is £195+v
To supply, fit and map a new Apexi PFC and Commander is £795+v
Travelling would be £200 for day 1 and £80 each subsequent day,
split between all persons.
i.e:
if 8 cars =£35 split
12 May 2008, 11:38 PM
#134
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: RCT
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Funny some of the things I posted did'nt come up.
Her goes again.
My No. 07971 675126
1 more Day. Good luck everyone and may the "G"-force be with you
Her goes again.
My No. 07971 675126
1 more Day. Good luck everyone and may the "G"-force be with you
13 May 2008, 01:19 PM
#137
Scooby Regular
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Fitting it is simple Al, its just a case of unscrew and unplug the original one, then screw in the Apexi. (DONT FIT UNTIL READY TO MAP) They use the same plugs so its a 5 minute job. As for the mapping keep a little eye on this thread just incase anybody has to drop out and you may get lucky. Andy's based in Scotland so a bit of a way to travel for a map, but his knowledge of Subarus in unrivalled IMHO. Otherwise there's Matt in Barry thats just started mapping or Bob Rawle in Swindon or Jolly Green Monster (Simon) who i think is based in London but has met up with some people along the M4 corridor.
13 May 2008, 01:20 PM
#138
Scooby Regular
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Yes Taylor, your figures seem correct. copy below of list of prices for all the guys.
Fingers crossed for you chris. I know the feeling after my little scare last week.
Again just to confirm. If anyone has a problem can you please let me know so that Andy is contacted. You can get me on my works mobile
Fingers crossed for you chris. I know the feeling after my little scare last week.
Again just to confirm. If anyone has a problem can you please let me know so that Andy is contacted. You can get me on my works mobile
(I'm sick of 3K RPM
)
13 May 2008, 09:06 PM
#139
I can't believe this is now only 2 days away!!! 
There is no way my TMIC is gonna be ready in time, not that anthing negative will happen as and when it is swapped over. I will however be very happy to have it back where it was before the fuel pump went!!!
There is no way my TMIC is gonna be ready in time, not that anthing negative will happen as and when it is swapped over. I will however be very happy to have it back where it was before the fuel pump went!!!
13 May 2008, 09:22 PM
#140
Scooby Regular
iTrader: (9)
Join Date: May 2006
Location: On MLR
Posts: 1,280
Likes: 0
Received 0 Likes
on
0 Posts
Just received an email from Andy with some bad news. My Simtek ecu wasn't delivered to Andy's address and has gone AWOL with the courier being unable to trace it.
So no remap for me tomorrow
So no remap for me tomorrow
14 May 2008, 08:01 PM
#144
Scooby Regular
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
Not long back from having the car done and well pleased! More power and seemingly a little less lag from the 20g too. Can't wait for the rollers. Big thanks to Dazzy J for organising the group buy and a big thanks to Andy for a first class job yet again. Thank you to you both. 
Taylor.
Taylor.
15 May 2008, 09:16 AM
#146
Scooby Regular
iTrader: (9)
Join Date: May 2006
Location: On MLR
Posts: 1,280
Likes: 0
Received 0 Likes
on
0 Posts
Not long back from having the car done and well pleased! More power and seemingly a little less lag from the 20g too. Can't wait for the rollers. Big thanks to Dazzy J for organising the group buy and a big thanks to Andy for a first class job yet again. Thank you to you both.
Taylor.
Taylor.
. I'm going to organise for Andy to come back as soon as he is available to map mine. So if anyone else is interested I'll be arranging another group remap very soon.
15 May 2008, 01:11 PM
#147
Scooby Regular
iTrader: (2)
Join Date: Jun 2005
Location: TAXI ANYONE!!
Posts: 1,528
Likes: 0
Received 0 Likes
on
0 Posts
just finished my session with Andy and well pleased with the car now after a very late night in lee's garage 1.45am we put the tools down .
couldn't have done it with out lee and mark
couldn't have done it with out lee and mark
15 May 2008, 04:34 PM
#149
Scooby Regular
Thread Starter
Join Date: Mar 2004
Location: RCT
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
I suppose it's Power run time now.
I believe Taylor & Jarv are going to sort one out soon.
It will be nice to see what we're all pushing out now, South Wales has been a hive of modding of late.
Glad to see that all went smooth and hopefully Andy is safe back home now.
Big thanks to all who took part and made it possible
& Thanks to Andy again for making us all happy
Until next time
I believe Taylor & Jarv are going to sort one out soon.
It will be nice to see what we're all pushing out now, South Wales has been a hive of modding of late.
Glad to see that all went smooth and hopefully Andy is safe back home now.
Big thanks to all who took part and made it possible
& Thanks to Andy again for making us all happy
Until next time
15 May 2008, 05:45 PM
#150
Scooby Regular
iTrader: (2)
Join Date: Mar 2007
Location: Bridgend
Posts: 2,268
Likes: 0
Received 0 Likes
on
0 Posts
I suppose it's Power run time now.
I believe Taylor & Jarv are going to sort one out soon.
It will be nice to see what we're all pushing out now, South Wales has been a hive of modding of late.
Glad to see that all went smooth and hopefully Andy is safe back home now.
Big thanks to all who took part and made it possible
& Thanks to Andy again for making us all happy
Until next time
I believe Taylor & Jarv are going to sort one out soon.
It will be nice to see what we're all pushing out now, South Wales has been a hive of modding of late.
Glad to see that all went smooth and hopefully Andy is safe back home now.
Big thanks to all who took part and made it possible
& Thanks to Andy again for making us all happy
Until next time