HYBRID GT FMIC KITS.
#31
Dunc: Your assessment is spot on. Any bar and plate is likely to suffer a much larger pressure drop and lag than the Hybrid tube and fin core. A lot of thought has gone into the core design to aid free flow and thus almost eliminate lag. This is why the Hybrid tube and fin easily outperforms copies that have not had the same attention to the detailed design of the core.
I have an APS on the STi 6 Wagon which is bar and plate and it is also powder coated black. The Hybrid Tube and Fin at around a third of the cost of what the APS was, greatly out performs the more expensive product.
The GT kit can run with the APS CAK but you have to enlarge the hole in the inner wing which is no big deal. Send me your email address and I will send you pictures of the enlarged hole.
I have an APS on the STi 6 Wagon which is bar and plate and it is also powder coated black. The Hybrid Tube and Fin at around a third of the cost of what the APS was, greatly out performs the more expensive product.
The GT kit can run with the APS CAK but you have to enlarge the hole in the inner wing which is no big deal. Send me your email address and I will send you pictures of the enlarged hole.
#34
hi harvey still interested in these, i know you have said it can be darker but a darker shade of the blue already, the blue is more of a sky blue and i was hoping to get more of a royal / navy blue sucj as the DBM any chance of this as if not no worries i will get it normal and try and get it done else where.
also is it better to have the extra clips and hose to cut it at the washer bottle,? does it make that much of a difference to fitting ? etc
i would like to get this sorted so i can send you payment this week
regards
also is it better to have the extra clips and hose to cut it at the washer bottle,? does it make that much of a difference to fitting ? etc
i would like to get this sorted so i can send you payment this week
regards
#35
Stevie : I think the easiest way to get you the colour you want is for you to send me a card with that particular colour. I am sure we can do a good job of matching it but if we feel that we cannot for any reason, which is very unlikely, I will tell you at the outset and you can have the pipes without powder coat and get them processed yourself.
To ensure you get what you want I think this is the safest way forward and if we get a colour card I am very confident you will get a match but remember we cannot powder coat tartan
For the P1 you do not need extra clips and hose as it is a straight fit. I think you have 2 fans on your P1. You may find it necessary to cut back the cowling on the fan nearest the pasenger side wing to allow the pipe that runs up the front of the timing chest to take the best route without fouling.
Let me know when you wish to proceed.
harveysmith1@btopenworld.com
To ensure you get what you want I think this is the safest way forward and if we get a colour card I am very confident you will get a match but remember we cannot powder coat tartan
For the P1 you do not need extra clips and hose as it is a straight fit. I think you have 2 fans on your P1. You may find it necessary to cut back the cowling on the fan nearest the pasenger side wing to allow the pipe that runs up the front of the timing chest to take the best route without fouling.
Let me know when you wish to proceed.
harveysmith1@btopenworld.com
#37
Yes. I carry a complete set of spares. What happened to yours?
One pipe goes from the TB to the top of the timong chest and another goes from there to the core discharge coupling.
I suggest you get in touch, harveysmith1@btopenworld.com
One pipe goes from the TB to the top of the timong chest and another goes from there to the core discharge coupling.
I suggest you get in touch, harveysmith1@btopenworld.com
#38
Scooby Regular
iTrader: (9)
I received the intercooler kit for my newage sti last week, finished the install yesterday. Looks to be a quality bit of kit , managed to get a Jetex filter from a ford ka kit that fits in the lower wing area.
My only concern is that the intercooler pipe running under the car hangs very low, is it possible to run the pipes above the engine on the passenger side? will get some pics up later.
My only concern is that the intercooler pipe running under the car hangs very low, is it possible to run the pipes above the engine on the passenger side? will get some pics up later.
#39
Scooby Regular
iTrader: (5)
I received the intercooler kit for my newage sti last week, finished the install yesterday. Looks to be a quality bit of kit , managed to get a Jetex filter from a ford ka kit that fits in the lower wing area.
My only concern is that the intercooler pipe running under the car hangs very low, is it possible to run the pipes above the engine on the passenger side? will get some pics up later.
My only concern is that the intercooler pipe running under the car hangs very low, is it possible to run the pipes above the engine on the passenger side? will get some pics up later.
#40
Scooby Regular
Join Date: Dec 2005
Location: portsmouth
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Hi Harvey, I spoke to you a week or so ago regarding a kit for my 93 wrx. Ive now got my paypal sorted and would like to order one (if you have one left?). Looking at your first post am I right in saying it will be £319.30 for the kit with extra joiner and the 3.5% paypal fee??
#42
Richo : E-mail sent this morning.
Harry. I am e-mailing you now if your Profile allows that facility.
It is possible to get the pipework on the passenger side to sit a good bit higher but it would be a lot easier to phone you with the detailed info.
Please e-mail your phone number.
Ian/Granby. : If we fit your FMIC you will find the pipes sit higher and you know you like these bacon butties you did not get last visit!!!
Harry. I am e-mailing you now if your Profile allows that facility.
It is possible to get the pipework on the passenger side to sit a good bit higher but it would be a lot easier to phone you with the detailed info.
Please e-mail your phone number.
Ian/Granby. : If we fit your FMIC you will find the pipes sit higher and you know you like these bacon butties you did not get last visit!!!
#43
HYBRID GT FMIC KITS FOR CLASSIC AND GDB FOR NEW AGE GT FMICs
COMPLETE £350 : GDB £375. [21-11-08]
COMPLETE £350 : GDB £375. [21-11-08]
Hybrid GT + GDB FMIC kits from extensive stocks held in Darlington, for Classic Subarus, MY 93-00, New Age 01 > with extras. Delivery and Paypal at additional cost.
Price Includes :
* Pipe clamps - Not Jubilee type clips supplied with lesser kits.
* Additonal silicon joiner, added by me for BOV spiggot connection on GT kit not included in other kits.
* Comprehensive packing list.
* Comprehensive instructions.
* Full Technical plus Product backup from someone who has sold and fitted these kits for seven years.
* HYBRID PREMIUM DEALER & INSTALLER.
ADDITIONAL COST OPTIONS AT TIME OF PURCHASE.
* Add 3.5% for Paypal.
* Overnight delivery £12.50.
* Saturday delivery by arrangement.
* Flange adaptors for re-use of OE BOV MY99-00. Add £22.50.
* Flange adaptors for New Age 01>. Add £22.50.
* Additonal silicon joiner for GT kit and 2 no. pipe clamps. This allows cutting the hard pipe near the screen wash bottle. This articulation makes fitting easier/neater particularly on MY93-96. Add £13.50.
* Powder coated pipework. Blue, Red, Black, Green, Silver etc. (No Tartan). Adds 5-7 days. Add £40.00 for GC8 or £50 for GDB.
* Stone Chip application. The hard pipes are aluminium and subject to weather attack, particularly from road salt during Winter. The 2 pipes most affected are the bottom sections of the feeds to and from the core. You can protect these yourself or I will apply several coats of Stone Guard to the two relevant pipe sections. (Add 1 day to delivery) Add £13.50.
* Replacement cores and hard pipes for accident damaged items. All from stock held in Darlington. GC8 and GDB.
Same day fitting service in Darlington. Inclusive of all sundries. Can fit your induction kit if required. £180 fixed price for normal layout.
ALL kits in stock for next day delivery.
Hybrid RX Boost Controllers. A quality electronic boost controller and FCD combined for not much more than the cost of a manual valve and less than the cost of a fuel cut defender. In cabin adjustment. Attractive control unit £100.00. For cars with 2 port boost solenoids.
Hybrid SE Boost Controllers with stand alone 3 port boost solenoid. Another quality product which will improve in gear accelleration and boost control. Easy installation and attractive control unit. Rock solid boost control. Great value for money.
£150.00.
https://www.scoobynet.com/general-te...re-sti-uk.html
Hybrid SBG-D Boost Guages with analogue and digital read out in bar and PSI. £85.00 To run with SE boost controller.
All available for next day delivery
harveysmith1@btopenworld.com
I regret it has been necessary to review prices. Air freight charges have increase on each of the last three deliveries as they are charged in $s but with the falling oil price we may get a reduction. More signifigant is the volatile exchange rate. The previous GT Classic kit delivery was in early October, paid for in September but all these kits are now sold so the new price is based on the mid November exchange rate.
Last edited by harvey; 24 February 2009 at 01:18 PM.
#45
Hi Richo: You have PM.
harveysmith1@btopenworld.com
but perhaps PM as there is a glitch with Outlook Express at present.
harveysmith1@btopenworld.com
but perhaps PM as there is a glitch with Outlook Express at present.
#47
Funnily enough we have fitted three P1 in the last couple of months and supplied at least another two.
I include an additional joiner for the spiggot for the BOV. If you wish to reuse the O/E BOV or an aftermarket that is already bolted to the front face of your TMIC then you will need a flange adaptor, cost £22.50 when supplied at the same time as the FMIC kit. Other than that the kit is complete but you cannot run your OE airbox if you still have it and will need a cone filter arrangement of some sort.
Go for the largest filter you can get in the space available and I have settled on K+N.
If you email me your email address I will send some P1 photos. harveysmith1@btopenworld.com
We charge £180 inclusive of sundries as a fixed price for fitting these kits and it takes about six hours start to finish providing there are no unexpected problems.
I include an additional joiner for the spiggot for the BOV. If you wish to reuse the O/E BOV or an aftermarket that is already bolted to the front face of your TMIC then you will need a flange adaptor, cost £22.50 when supplied at the same time as the FMIC kit. Other than that the kit is complete but you cannot run your OE airbox if you still have it and will need a cone filter arrangement of some sort.
Go for the largest filter you can get in the space available and I have settled on K+N.
If you email me your email address I will send some P1 photos. harveysmith1@btopenworld.com
We charge £180 inclusive of sundries as a fixed price for fitting these kits and it takes about six hours start to finish providing there are no unexpected problems.
#56
I might be interested in one of these at some point, would I need a new BOV or would the standard one fit? STi Version 2.
Thanks.
Thanks.
Last edited by Mr_White; 05 December 2008 at 02:04 PM.
#58
Scooby Regular
iTrader: (13)
harvey, I see in the pic that the Hybrid SBG-D Boost Gauge only goes up to 1.5bar - do they do 2.0, 2.5 and/or 3.0bar scale ones at all?
Also, are they 52mm (or 60mm), and definitely white-faced without the illumination on (as per the photo)?
Finally, does the little digital window read the PSI equivalent of the analogue dial's BAR reading? Is there a peak-hold function too, etc.?
Also, are they 52mm (or 60mm), and definitely white-faced without the illumination on (as per the photo)?
Finally, does the little digital window read the PSI equivalent of the analogue dial's BAR reading? Is there a peak-hold function too, etc.?
#59
The guage is white faced per the photo and it comes with its own mounting bracket and adhesive pad, very simple, very attractive. 60 diameter and can be mounted almost anywhere with the bracket supplied but you could incorporate it in a pod. It runs to 1.55 bar which should be enough for all standard internal 2 and 2.5 litre cars and PSI is in the window.
There is optional warning light and back light control with the additional SEBS unit if required.
At £85 these are proving very popular and selling like hot cakes as they represent very good value for money and are easy to install. I have one in our STi UK and am impressed with it. Good looking and accurate.
There is optional warning light and back light control with the additional SEBS unit if required.
At £85 these are proving very popular and selling like hot cakes as they represent very good value for money and are easy to install. I have one in our STi UK and am impressed with it. Good looking and accurate.