Arch

iTrader: (59)

Well it couls well be if that is the correct fitment of the aircon radiator that the alloy radiators are not compatible with cars fitted with aircon as that seems to be the cause of your fitment problem.

340BHP-WRX

iTrader: (6)

The air con rad is not the cause of the fitment problem !

I've just been out to try and see if I could make it fit. By removing the charcoal canister on the left of the engine bay I managed to get the rad to drop into the mounting holes at the bottom. It still sits backwards towards the engine slightly but could be pulled forwards and clamped up with the top mounts.

I've noticed 2 big problems with this now.

1) As we previously mentioned,the left fan has not got enough room so I tried just fitting the right fan. The 2 top holes for the bolts line up but the bottom ones don't so you would only have 2 little bolts holding the fan on.

2) There is absolutely no way that the front mount pipe will fit between the rad and the cam cover.

So,maybe this rad would fit if you have a certain type of fan and don't have a FMIC. It certainly will not fit my car.

I shall be asking Japspeed for a refund.

I have some photos that I will post up shortly.

CrazyGTiR

iTrader: (1)

This is what I was also worried about

340BHP-WRX

iTrader: (6)

Right,here's a few photos to show the problems:

Right rad fan top bolts line up:


Right rad fan bottom bolt holes don't line up:



Radiator fitted in place,as anyone with a FMIC will know there is no way the pipework will fit in that tiny gap and I hadn't even fitted the water hose !


Charcoal canister has to be removed as it prevents the rad from fitting correctly:


I'm going to send the rad back to Japspeed for a refund and will probably just replace it with a new standard rad,less hassle

M535I

well mine is no use to me either then mate so mine will allso be going back .

CrazyGTiR

iTrader: (1)

Do you think that with 2 Slimline fans I could get my intercooler pipe work to fit???

CrazyGTiR

iTrader: (1)

Something like this: 16" Slim Electric Radiator Cooling Fan Subaru STi WRX on eBay, also Engine Tuning Parts, Performance Tuning Parts, Car Tuning Styling, Cars, Parts Vehicles (end time 18-Jan-09 21:11:27 GMT)

CrazyGTiR

iTrader: (1)

340BHP-WRX

iTrader: (6)

No,it still wont fit as there just isn't the room as the rad itself takes up too much of the gap where the pipe would fit !

jayallen

iTrader: (31)

So basically these rads are useless if you have aircon and a FMIC??

340BHP-WRX

iTrader: (6)

The air con has nothing to do with it. You wouldn't be able to have a FMIC with this rad unless the FMIC pipework was tiny.

CrazyGTiR

iTrader: (1)

Looks like my rad will be returned then!!!



Japspeed, will you be refunding postage costs too???

W9LTN

iTrader: (1)

Hmmm. Mines already fitted and i don't have air con but was looking to get a FMIC. maybe i would be looking at getting some pipework made up if it doesn't fit.

W9LTN

iTrader: (1)

does anyone have pics of where the pipework goes as i've never really looked into it.

340BHP-WRX

iTrader: (6)

The pipework would have to be so small to fit through the available gap that it would be no good,it would be far too restrictive.

W9LTN

iTrader: (1)

I understand. I just need to see some pics of how the pipework should look.

340BHP-WRX

iTrader: (6)

Just searching for some pics now,will post some shortly

W9LTN

iTrader: (1)

https://www.scoobynet.com/projects-4...r-project.html

just found a guide pics are about 1/2 way down page

340BHP-WRX

iTrader: (6)

Well as you can see in those pics the I/C pipework fits between the rad/engine and there's not enough room with the race rad

W9LTN

iTrader: (1)

for those looking at having a front mount and a new rad i found this,
Area 52 Autosport On-line shop

340BHP-WRX

iTrader: (6)

That's £1100 for a FMIC

I think i'd rather stick with my Hybrid FMIC and the standard rad

340BHP-WRX

iTrader: (6)

PM'd ED@Japspeed regarding a refund for the rad due to these fitment problems

340BHP-WRX

iTrader: (6)

PM received ED thanks

Ed@Japspeed

iTrader: (35)

Have repiled back to your PM now mate

As for the space for the FMIC piping we have not had any problems with these before but i will look into this now for you and come back to you ASAP

CrazyGTiR

iTrader: (1)

Thanks Ed@Japspeed, let us know ASAP!!!

340BHP-WRX

iTrader: (6)

Posted my radiator back to Japspeed today for a refund. Cost me £15 postage so hopefully I will get that back aswell.

CrazyGTiR

iTrader: (1)

Think I am also sending my Rad back as cant be bothered with the hassle to be honest!!!

Ed@Japspeed

iTrader: (35)

Thats fine if you want to send it back but it would be worth actually trying the radiator first as we have sold hundreds of these previously and that is the only one we have ever had problems with. It is more likely it was a manufacturing error with that radiator.



Regarding the FMIC fitting these radiators will fit fine. It is a bit of a tight fit and sometimes if you have 2 fans installed you have to trim the edge of the fan shroud but nothing brutal

CrazyGTiR

iTrader: (1)

I have 2 fans fitted and also have the Hybrid front mounted intercooler and I doubt it will fit from the pictures above

Anybody got any pictures of this rad fitted with a front mount intercooler???

Ed@Japspeed

iTrader: (35)

No problem i would say the best thing is to try it and see

If it doesnt fit then let me know and by all means send it back to us.