08/09 Hatches, Stand up and show yourselves!!!
#9151
Scooby Regular
#9152
Scooby Senior
http://www.autoexpress.co.uk/wheels-...tyre-test-2012
can you get 205 on the std STi rim?
std STi rim has 235 on I think, i'll go look at my winter alloys in a bit
http://s37.beta.photobucket.com/user...eel%20Painting
KevM has some alloys forsale btw... 17" Sti & 18" 330s Alloys
can you get 205 on the std STi rim?
std STi rim has 235 on I think, i'll go look at my winter alloys in a bit
http://s37.beta.photobucket.com/user...eel%20Painting
KevM has some alloys forsale btw... 17" Sti & 18" 330s Alloys
#9153
Scooby Regular
iTrader: (5)
have a look here...
http://forums.nasioc.com/forums/showthread.php?t=969272
and here
https://www.scoobynet.com/west-yorks...p-project.html
http://forums.nasioc.com/forums/showthread.php?t=969272
and here
https://www.scoobynet.com/west-yorks...p-project.html
Different type of kit that, The hatch doesnt have any mountings up front so I need to make a suitable captive nut in the front cross piece..
But gives some nice tips just like Frayz's thread to work off
#9154
Scooby Regular
iTrader: (1)
http://www.autoexpress.co.uk/wheels-...tyre-test-2012
can you get 205 on the std STi rim?
std STi rim has 235 on I think, i'll go look at my winter alloys in a bit
http://s37.beta.photobucket.com/user...eel%20Painting
KevM has some alloys forsale btw... 17" Sti & 18" 330s Alloys
can you get 205 on the std STi rim?
std STi rim has 235 on I think, i'll go look at my winter alloys in a bit
http://s37.beta.photobucket.com/user...eel%20Painting
KevM has some alloys forsale btw... 17" Sti & 18" 330s Alloys
I had near to zero grip last night with the 18 inch 330s wheels and Dunlop rubber. Now it just goes and stops as if there is nothing on the ground.
#9155
exhaust guys.
im on budget, the milteck system is nice buts very expensive for a turbo back system (decat) as is the H+S system altho slightly better priced than the milteck i think, is the H+S a 3" too? the scorpian is again a bit cheaper but i think its only 2.75"?
i have seen some cheaper kit on ebay from japspeed, are these any good? and what size are they as i cant see anywhere what it says, i think 2.5" would be to narrow, whats the best option on the sti 2.75 or 3"? i assume 3".
what do you guys recomend? save up for a H+S or milteck?
what size is the prodrive kit BTW as a second hand system would be cheap for me and you get the odd one come up, as you do the H+S as i missed one last week.
thanks guys
im on budget, the milteck system is nice buts very expensive for a turbo back system (decat) as is the H+S system altho slightly better priced than the milteck i think, is the H+S a 3" too? the scorpian is again a bit cheaper but i think its only 2.75"?
i have seen some cheaper kit on ebay from japspeed, are these any good? and what size are they as i cant see anywhere what it says, i think 2.5" would be to narrow, whats the best option on the sti 2.75 or 3"? i assume 3".
what do you guys recomend? save up for a H+S or milteck?
what size is the prodrive kit BTW as a second hand system would be cheap for me and you get the odd one come up, as you do the H+S as i missed one last week.
thanks guys
#9157
i had seen that GB, just depends what the total cost will be, dont want to overspend modding this car, the cheaper i can achive the end goal the less i lose when i sell up, that why id ideally like second hand parts.
will have to add up the costs of the H+S GB
will have to add up the costs of the H+S GB
#9159
yeah thats what i did with the last car, just if i buy second hand and sell second id make more than 50% back. just need to work out what will cost what and what i have availble when it comes to the GB
#9162
#9164
Scooby Senior
exhaust guys.
im on budget, the milteck system is nice buts very expensive for a turbo back system (decat) as is the H+S system altho slightly better priced than the milteck i think, is the H+S a 3" too? the scorpian is again a bit cheaper but i think its only 2.75"?
i have seen some cheaper kit on ebay from japspeed, are these any good? and what size are they as i cant see anywhere what it says, i think 2.5" would be to narrow, whats the best option on the sti 2.75 or 3"? i assume 3".
what do you guys recomend? save up for a H+S or milteck?
what size is the prodrive kit BTW as a second hand system would be cheap for me and you get the odd one come up, as you do the H+S as i missed one last week.
thanks guys
im on budget, the milteck system is nice buts very expensive for a turbo back system (decat) as is the H+S system altho slightly better priced than the milteck i think, is the H+S a 3" too? the scorpian is again a bit cheaper but i think its only 2.75"?
i have seen some cheaper kit on ebay from japspeed, are these any good? and what size are they as i cant see anywhere what it says, i think 2.5" would be to narrow, whats the best option on the sti 2.75 or 3"? i assume 3".
what do you guys recomend? save up for a H+S or milteck?
what size is the prodrive kit BTW as a second hand system would be cheap for me and you get the odd one come up, as you do the H+S as i missed one last week.
thanks guys
http://www.cobrasport.com/exhaust/Su...8-10%29/31/0/0
he has a Sti, they can make you what ever tail pipes you want.
You're only at Staffs, so a trip to Sheffield, while its being fitted you can go shopping at Meadow Hall
was going to anyway
#9165
Rob what's the price on these mate as when I looked at getting one from Japan parts the price plus delivery then importing tax put it on the back burner, frayz was kind enough to offer to fit it just never got around to ordering one due to the costs, pm me if you would rather
#9166
http://www.autoexpress.co.uk/wheels-...tyre-test-2012
can you get 205 on the std STi rim?
std STi rim has 235 on I think, i'll go look at my winter alloys in a bit
http://s37.beta.photobucket.com/user...eel%20Painting
KevM has some alloys forsale btw... 17" Sti & 18" 330s Alloys
can you get 205 on the std STi rim?
std STi rim has 235 on I think, i'll go look at my winter alloys in a bit
http://s37.beta.photobucket.com/user...eel%20Painting
KevM has some alloys forsale btw... 17" Sti & 18" 330s Alloys
#9167
Scooby Senior
Pm'd him on FB for you
#9168
exhaust guys.
im on budget, the milteck system is nice buts very expensive for a turbo back system (decat) as is the H+S system altho slightly better priced than the milteck i think, is the H+S a 3" too? the scorpian is again a bit cheaper but i think its only 2.75"?
i have seen some cheaper kit on ebay from japspeed, are these any good? and what size are they as i cant see anywhere what it says, i think 2.5" would be to narrow, whats the best option on the sti 2.75 or 3"? i assume 3".
what do you guys recomend? save up for a H+S or milteck?
what size is the prodrive kit BTW as a second hand system would be cheap for me and you get the odd one come up, as you do the H+S as i missed one last week.
thanks guys
im on budget, the milteck system is nice buts very expensive for a turbo back system (decat) as is the H+S system altho slightly better priced than the milteck i think, is the H+S a 3" too? the scorpian is again a bit cheaper but i think its only 2.75"?
i have seen some cheaper kit on ebay from japspeed, are these any good? and what size are they as i cant see anywhere what it says, i think 2.5" would be to narrow, whats the best option on the sti 2.75 or 3"? i assume 3".
what do you guys recomend? save up for a H+S or milteck?
what size is the prodrive kit BTW as a second hand system would be cheap for me and you get the odd one come up, as you do the H+S as i missed one last week.
thanks guys
#9169
Scooby Regular
iTrader: (5)
Rob what's the price on these mate as when I looked at getting one from Japan parts the price plus delivery then importing tax put it on the back burner, frayz was kind enough to offer to fit it just never got around to ordering one due to the costs, pm me if you would rather
#9170
That's spot on mate, could be interested in one of these although I need to stop looking at piston heads as I've come across a couple of new saloons that have caught eye lol
#9173
Ha figured you may say that, something about the plasma blue I really like.
Fair comment mate, if it stays then I've done almost all of my homework, have people and companies in place to get the tuning a rolling
Fair comment mate, if it stays then I've done almost all of my homework, have people and companies in place to get the tuning a rolling
#9174
Scooby Regular
iTrader: (2)
Join Date: Jun 2012
Location: South Essex - Grey Hatch 330S
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
So I have just discovered US eBay and all the Hatch parts they have over on there wallet is worried now.
Seen a decent looking splitter like the OEM one, any of you lads got any advice or alternatives for my STi?
Splitter
Item: 271015399342
Thanks
Seen a decent looking splitter like the OEM one, any of you lads got any advice or alternatives for my STi?
Splitter
Item: 271015399342
Thanks
#9175
Scooby Regular
iTrader: (2)
Join Date: Jun 2012
Location: South Essex - Grey Hatch 330S
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Also is there any Perrin stuff worth importing in? Pitch stop shroud, radiator shroud and upper radiatior shroud stays look nice not sure if they are worth it though
#9176
Scooby Regular
iTrader: (15)
Join Date: Apr 2006
Location: Kent
Posts: 2,995
Likes: 0
Received 0 Likes
on
0 Posts
So I have just discovered US eBay and all the Hatch parts they have over on there wallet is worried now.
Seen a decent looking splitter like the OEM one, any of you lads got any advice or alternatives for my STi?
Splitter
Item: 271015399342
Thanks
Seen a decent looking splitter like the OEM one, any of you lads got any advice or alternatives for my STi?
Splitter
Item: 271015399342
Thanks
Last edited by Abx; 20 January 2013 at 08:10 PM.
#9177
#9178
What iduction kits u guys run? Jst a panel filter? Dosent seem many induction kits there and very expensive for a filter and pipe, do u need it for 340-350bhp or just a good panel filter?
Thanks
Thanks
#9179
So I have just discovered US eBay and all the Hatch parts they have over on there wallet is worried now.
Seen a decent looking splitter like the OEM one, any of you lads got any advice or alternatives for my STi?
Splitter
Item: 271015399342
Thanks
Seen a decent looking splitter like the OEM one, any of you lads got any advice or alternatives for my STi?
Splitter
Item: 271015399342
Thanks
That's the BasonR one I had on my old hatch, nice size and a little more aggressive than the standard STI one, I've had two from America, the STI rep was good and the finish was spot on, this I was pretty disappointed as it had quite a few moulding marks and the colour was patchy, I had to wet and dry it smooth and follow with a coat of plastidip, end result was really good but a bit of hassle.
#9180