08/09 Hatches, Stand up and show yourselves!!!
01 February 2013, 10:46 PM
#9331
Scooby Senior
02 February 2013, 10:25 PM
#9333
Scooby Senior
I passed MOT on Wednesday with them, got them on the Van and Jo's Focus too... all passed MOT.
Life ... nothing lasts for ever and can't guarantee anything when it comes to any bulb.
Life ... nothing lasts for ever and can't guarantee anything when it comes to any bulb.
03 February 2013, 11:33 AM
#9335
I've already got the front sides done, can you do me a pair of rear no. plate SMDs then Phil please?
Actually, £8 for all 4 inc postage is a bargain, I'll take a set - PM your paypal please!
V
04 February 2013, 08:08 PM
#9337
Scooby Senior
04 February 2013, 08:56 PM
#9339
Scooby Senior
PIC request.. show us your mud flaps...
I've teh std sealer fit ones.. and think I'm ready for a new set.
Like the look of the rally style ones...
options are these
http://www.evobits.co.uk/index.php?r...product_id=185
They are just like the Rally Armor Version 1's size/shape. Like the look but not sure how they look on a car.
or these...http://www.performancecreations.co.u...logo-144-p.asp
So who has what fitted and what do they look like on your car.
I've teh std sealer fit ones.. and think I'm ready for a new set.
Like the look of the rally style ones...
options are these
http://www.evobits.co.uk/index.php?r...product_id=185
They are just like the Rally Armor Version 1's size/shape. Like the look but not sure how they look on a car.
or these...http://www.performancecreations.co.u...logo-144-p.asp
So who has what fitted and what do they look like on your car.
Last edited by salsa-king; 04 February 2013 at 08:57 PM.
05 February 2013, 12:35 AM
#9341
Scooby Regular
Join Date: Jun 2012
Location: Scotland
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
PIC request.. show us your mud flaps...
I've teh std sealer fit ones.. and think I'm ready for a new set.
Like the look of the rally style ones...
options are these
http://www.evobits.co.uk/index.php?r...product_id=185
They are just like the Rally Armor Version 1's size/shape. Like the look but not sure how they look on a car.
or these...http://www.performancecreations.co.u...logo-144-p.asp
So who has what fitted and what do they look like on your car.
I've teh std sealer fit ones.. and think I'm ready for a new set.
Like the look of the rally style ones...
options are these
http://www.evobits.co.uk/index.php?r...product_id=185
They are just like the Rally Armor Version 1's size/shape. Like the look but not sure how they look on a car.
or these...http://www.performancecreations.co.u...logo-144-p.asp
So who has what fitted and what do they look like on your car.
05 February 2013, 12:32 PM
#9343
Scooby Senior
05 February 2013, 04:03 PM
#9344
1/ Push the trip **** to select “REV” on the combination meter
2/ When the trip **** is pushed for more than 2 seconds the thousands place flashes.
3/ Release your finger from the trip **** once, then push and hold the trip **** again. The number will change sequentially from 2 to 7. Release your finger at the desired alarm level engine speed.
4/ When the trip **** is pushed, the hundreds place flashes.
5/ Release your finger from the trip **** once, then push and hold the trip **** again. The number will change sequentially from 1 to 9. Release your finger at the desired alarm level engine speed.
6/ When the trip **** is pushed, the buzzer sounds and the REV alarm system will automatically enter its new setting mode (step 7 below), in which you can activate or deactivate the buzzer.
7/ Every time the trip **** is pushed and held, the buzzer changes to activate or deactivate.
b – On: Activated
b – oFF: Deactivated
When the mode is changed to “activate”, the buzzer sounds.
8/ Push the trip **** to complete the setting procedure.
This all has to be done with the ignition On and the car stationary.
All this information can be found in the Owners Manual, Chapter 3-13 in my manual for 09 hatch sti may be different in other manuals.
05 February 2013, 04:55 PM
#9345
Scooby Regular
iTrader: (2)
Join Date: Jun 2012
Location: South Essex - Grey Hatch 330S
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Made a totally newb error while ordering parts from Japan and ordered 3 pairs of the black front arch STi badges from the R205 by accident. Will teach me to check the cart quantity next time 
I have 2 pairs to sell £60 posted each delivered via RM Signed For can be collected in person from South Essex or paid for via PayPal.
I have 2 pairs to sell £60 posted each delivered via RM Signed For can be collected in person from South Essex or paid for via PayPal.
05 February 2013, 05:46 PM
#9346
Made a totally newb error while ordering parts from Japan and ordered 3 pairs of the black front arch STi badges from the R205 by accident. Will teach me to check the cart quantity next time
I have 2 pairs to sell £60 posted each delivered via RM Signed For can be collected in person from South Essex or paid for via PayPal.
I have 2 pairs to sell £60 posted each delivered via RM Signed For can be collected in person from South Essex or paid for via PayPal.
05 February 2013, 07:47 PM
#9347
Scooby Regular
Join Date: Sep 2003
Location: At the diesel pump...
Posts: 8,677
Likes: 0
Received 0 Likes
on
0 Posts
Can someone do me a quick favour please?
I need the measurement from an 09 sun visor. From the outside edge of the L shaped bracket to the outside edge of the clip seat.
My drivers side has broken and I and I need the size to make sure some spares will fit. I know an 08 legacy ones will, but these are from an 07 impreza. If they dont fit, I'll be pulling them apart to repair mine.
Ps: I can't cos mines in the garage under assesment, to determine just how sick it is.
I need the measurement from an 09 sun visor. From the outside edge of the L shaped bracket to the outside edge of the clip seat.
My drivers side has broken and I and I need the size to make sure some spares will fit. I know an 08 legacy ones will, but these are from an 07 impreza. If they dont fit, I'll be pulling them apart to repair mine.
Ps: I can't cos mines in the garage under assesment, to determine just how sick it is.
05 February 2013, 08:22 PM
#9348
Scooby Newbie
Join Date: Jan 2013
Location: Scotland, Fife
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
How do you get the front interior light of to change the bulbs haha? Tried to pita card up the side and pry the lense of or do you pull the whole plastic bit off?
05 February 2013, 08:47 PM
#9350
Scooby Regular
Join Date: Oct 2012
Location: wales
Posts: 248
Likes: 0
Received 0 Likes
on
0 Posts
Can someone do me a quick favour please?
I need the measurement from an 09 sun visor. From the outside edge of the L shaped bracket to the outside edge of the clip seat.
My drivers side has broken and I and I need the size to make sure some spares will fit. I know an 08 legacy ones will, but these are from an 07 impreza. If they dont fit, I'll be pulling them apart to repair mine.
Ps: I can't cos mines in the garage under assesment, to determine just how sick it is.
I need the measurement from an 09 sun visor. From the outside edge of the L shaped bracket to the outside edge of the clip seat.
My drivers side has broken and I and I need the size to make sure some spares will fit. I know an 08 legacy ones will, but these are from an 07 impreza. If they dont fit, I'll be pulling them apart to repair mine.
Ps: I can't cos mines in the garage under assesment, to determine just how sick it is.
05 February 2013, 10:04 PM
#9351
Scooby Senior
GUYS.. all you who ordered #plate +side light bulbs, they have been tested and packed this evening, will be posted tomorrow.
To remove the #plate bulb holders.
get your fingers in there and ease them firmly to one side (if that side doesn't work, try the other side) and at the same time slightly pulling downwards. They may be a bit tight if they've not come out before.
to get to the side light bulbs
put you front wheels on full lock so you can gain access to the front wheel arch. remove the bottom plastic bung clip, then the others going up the outer side of the wheel arch/bumper.
Once those are removed, pull out the wheel arch from the lip of the front wing/bumper. The wheel arch won't break!! Squeeze your arm in the gap and fiddle for the head light cover. Unclip and feel for the side light bulb holder. 1/4 turn will remove it. pull out the std bulb and carefully replace with new SMD Bulb. If the bulb doesn't work, take it out and re fit the other way round (- & + might be wrong way round).
Then work backwards and put everything back.
To remove the #plate bulb holders.
get your fingers in there and ease them firmly to one side (if that side doesn't work, try the other side) and at the same time slightly pulling downwards. They may be a bit tight if they've not come out before.
to get to the side light bulbs
put you front wheels on full lock so you can gain access to the front wheel arch. remove the bottom plastic bung clip, then the others going up the outer side of the wheel arch/bumper.
Once those are removed, pull out the wheel arch from the lip of the front wing/bumper. The wheel arch won't break!! Squeeze your arm in the gap and fiddle for the head light cover. Unclip and feel for the side light bulb holder. 1/4 turn will remove it. pull out the std bulb and carefully replace with new SMD Bulb. If the bulb doesn't work, take it out and re fit the other way round (- & + might be wrong way round).
Then work backwards and put everything back.
05 February 2013, 10:20 PM
#9352
GUYS.. all you who ordered #plate +side light bulbs, they have been tested and packed this evening, will be posted tomorrow.
To remove the #plate bulb holders.
get your fingers in there and ease them firmly to one side (if that side doesn't work, try the other side) and at the same time slightly pulling downwards. They may be a bit tight if they've not come out before.
to get to the side light bulbs
put you front wheels on full lock so you can gain access to the front wheel arch. remove the bottom plastic bung clip, then the others going up the outer side of the wheel arch/bumper.
Once those are removed, pull out the wheel arch from the lip of the front wing/bumper. The wheel arch won't break!! Squeeze your arm in the gap and fiddle for the head light cover. Unclip and feel for the side light bulb holder. 1/4 turn will remove it. pull out the std bulb and carefully replace with new SMD Bulb. If the bulb doesn't work, take it out and re fit the other way round (- & + might be wrong way round).
Then work backwards and put everything back.
To remove the #plate bulb holders.
get your fingers in there and ease them firmly to one side (if that side doesn't work, try the other side) and at the same time slightly pulling downwards. They may be a bit tight if they've not come out before.
to get to the side light bulbs
put you front wheels on full lock so you can gain access to the front wheel arch. remove the bottom plastic bung clip, then the others going up the outer side of the wheel arch/bumper.
Once those are removed, pull out the wheel arch from the lip of the front wing/bumper. The wheel arch won't break!! Squeeze your arm in the gap and fiddle for the head light cover. Unclip and feel for the side light bulb holder. 1/4 turn will remove it. pull out the std bulb and carefully replace with new SMD Bulb. If the bulb doesn't work, take it out and re fit the other way round (- & + might be wrong way round).
Then work backwards and put everything back.
Cheers for sorting this out phil
05 February 2013, 10:59 PM
#9353
Scooby Regular
Setting the alarm level engine speed
1/ Push the trip **** to select “REV” on the combination meter
2/ When the trip **** is pushed for more than 2 seconds the thousands place flashes.
3/ Release your finger from the trip **** once, then push and hold the trip **** again. The number will change sequentially from 2 to 7. Release your finger at the desired alarm level engine speed.
4/ When the trip **** is pushed, the hundreds place flashes.
5/ Release your finger from the trip **** once, then push and hold the trip **** again. The number will change sequentially from 1 to 9. Release your finger at the desired alarm level engine speed.
6/ When the trip **** is pushed, the buzzer sounds and the REV alarm system will automatically enter its new setting mode (step 7 below), in which you can activate or deactivate the buzzer.
7/ Every time the trip **** is pushed and held, the buzzer changes to activate or deactivate.
b – On: Activated
b – oFF: Deactivated
When the mode is changed to “activate”, the buzzer sounds.
8/ Push the trip **** to complete the setting procedure.
This all has to be done with the ignition On and the car stationary.
All this information can be found in the Owners Manual, Chapter 3-13 in my manual for 09 hatch sti may be different in other manuals.
1/ Push the trip **** to select “REV” on the combination meter
2/ When the trip **** is pushed for more than 2 seconds the thousands place flashes.
3/ Release your finger from the trip **** once, then push and hold the trip **** again. The number will change sequentially from 2 to 7. Release your finger at the desired alarm level engine speed.
4/ When the trip **** is pushed, the hundreds place flashes.
5/ Release your finger from the trip **** once, then push and hold the trip **** again. The number will change sequentially from 1 to 9. Release your finger at the desired alarm level engine speed.
6/ When the trip **** is pushed, the buzzer sounds and the REV alarm system will automatically enter its new setting mode (step 7 below), in which you can activate or deactivate the buzzer.
7/ Every time the trip **** is pushed and held, the buzzer changes to activate or deactivate.
b – On: Activated
b – oFF: Deactivated
When the mode is changed to “activate”, the buzzer sounds.
8/ Push the trip **** to complete the setting procedure.
This all has to be done with the ignition On and the car stationary.
All this information can be found in the Owners Manual, Chapter 3-13 in my manual for 09 hatch sti may be different in other manuals.
thanks mate
05 February 2013, 10:59 PM
#9354
Scooby Regular
GUYS.. all you who ordered #plate +side light bulbs, they have been tested and packed this evening, will be posted tomorrow.
To remove the #plate bulb holders.
get your fingers in there and ease them firmly to one side (if that side doesn't work, try the other side) and at the same time slightly pulling downwards. They may be a bit tight if they've not come out before.
to get to the side light bulbs
put you front wheels on full lock so you can gain access to the front wheel arch. remove the bottom plastic bung clip, then the others going up the outer side of the wheel arch/bumper.
Once those are removed, pull out the wheel arch from the lip of the front wing/bumper. The wheel arch won't break!! Squeeze your arm in the gap and fiddle for the head light cover. Unclip and feel for the side light bulb holder. 1/4 turn will remove it. pull out the std bulb and carefully replace with new SMD Bulb. If the bulb doesn't work, take it out and re fit the other way round (- & + might be wrong way round).
Then work backwards and put everything back.
To remove the #plate bulb holders.
get your fingers in there and ease them firmly to one side (if that side doesn't work, try the other side) and at the same time slightly pulling downwards. They may be a bit tight if they've not come out before.
to get to the side light bulbs
put you front wheels on full lock so you can gain access to the front wheel arch. remove the bottom plastic bung clip, then the others going up the outer side of the wheel arch/bumper.
Once those are removed, pull out the wheel arch from the lip of the front wing/bumper. The wheel arch won't break!! Squeeze your arm in the gap and fiddle for the head light cover. Unclip and feel for the side light bulb holder. 1/4 turn will remove it. pull out the std bulb and carefully replace with new SMD Bulb. If the bulb doesn't work, take it out and re fit the other way round (- & + might be wrong way round).
Then work backwards and put everything back.
06 February 2013, 04:08 PM
#9355
Scooby Regular
iTrader: (2)
Join Date: Jun 2012
Location: South Essex - Grey Hatch 330S
Posts: 295
Likes: 0
Received 0 Likes
on
0 Posts
Made a totally newb error while ordering parts from Japan and ordered 3 pairs of the black front arch STi badges from the R205 by accident. Will teach me to check the cart quantity next time
I have 2 pairs to sell £60 posted each delivered via RM Signed For can be collected in person from South Essex or paid for via PayPal.
I have 2 pairs to sell £60 posted each delivered via RM Signed For can be collected in person from South Essex or paid for via PayPal.
Here's the pic 1 set left!
06 February 2013, 09:33 PM
#9358
Scooby Regular
07 February 2013, 07:27 AM
#9359
Scooby Senior
it makes all the difference