Latest results S206 turbo
#91
Had a passenger ride in Bill Sandhu classic Impreza wagon yesterday with the S206 turbo fitted,his basic spec is a built 2.5 litre, ppg gearbox, solaris ecu etc, Must say i was very impressed with this turbo, seemed to feel a lot smoother and hold boost across the rev range better compared to his previous GT30 which always seemed to feel like there was a bit of lag then a big dollop of boost and then tail off slightly(still made a very fast car), where as the S206 seemed to have a awesome spread of power and for a bigger turbo I didnt notice much turbo lag. Feels awesome now, quickest Impreza ive ever been in!!!!
#92
Thread Starter
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Had a passenger ride in Bill Sandhu classic Impreza wagon yesterday with the S206 turbo fitted,his basic spec is a built 2.5 litre, ppg gearbox, solaris ecu etc, Must say i was very impressed with this turbo, seemed to feel a lot smoother and hold boost across the rev range better compared to his previous GT30 which always seemed to feel like there was a bit of lag then a big dollop of boost and then tail off slightly(still made a very fast car), where as the S206 seemed to have a awesome spread of power and for a bigger turbo I didnt notice much turbo lag. Feels awesome now, quickest Impreza ive ever been in!!!!
#100
Thread Starter
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
#103
Thread Starter
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
#104
#105
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Further results on the S206 this morning. A customers car this time round with stock Sti4 heads and cams and an Enginetuner built 2.1 stroker.
#109
Martyn, if the motor was a built, 'normal' 1994cc displacement, but all supporting mods were exactly the same as that customer's - assuming any/all of them would also be suitable for the 2.0, of course - roughly what would it make on the same V-Power + 10% meth? How much less torque would it make, compared to the c.492lb ft of your 2.1?
Last edited by joz8968; 02 September 2009 at 11:32 PM.
#110
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
As always, it is difficult to say with any degree of certainty.
We are doing one very shortly so should no for sure then but my best guess would be similar power, but 30-40lbft less torque based on the results we are seeing on the Evos.
We are also building an STi8 with a 2.1 stroker and S206 at the moment and I am really excited about seeing what we can do with another 400-500rpm of spool with the VVT.
We are doing one very shortly so should no for sure then but my best guess would be similar power, but 30-40lbft less torque based on the results we are seeing on the Evos.
We are also building an STi8 with a 2.1 stroker and S206 at the moment and I am really excited about seeing what we can do with another 400-500rpm of spool with the VVT.
#112
#115
As always, it is difficult to say with any degree of certainty.
We are doing one very shortly so should no for sure then but my best guess would be similar power, but 30-40lbft less torque based on the results we are seeing on the Evos.
We are also building an STi8 with a 2.1 stroker and S206 at the moment and I am really excited about seeing what we can do with another 400-500rpm of spool with the VVT.
We are doing one very shortly so should no for sure then but my best guess would be similar power, but 30-40lbft less torque based on the results we are seeing on the Evos.
We are also building an STi8 with a 2.1 stroker and S206 at the moment and I am really excited about seeing what we can do with another 400-500rpm of spool with the VVT.
#117
#119
Scooby Regular
iTrader: (15)
Joined: Jul 2009
Posts: 1,305
Likes: 0
From: Somewhere halfway between heaven and hell, some call it earth!
Seriously now, i'm deeply considering....
If i were to have the 2.1 with on my sti8 keeping my heads, the s206 turbo, how long would it take to build and how much all in all? (Parts + Labour + VAT)
PM if you like
If i were to have the 2.1 with on my sti8 keeping my heads, the s206 turbo, how long would it take to build and how much all in all? (Parts + Labour + VAT)
PM if you like
#120
Thread Starter
Scooby Regular
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping