Numerous Uppipes. New. Secondhand. 3 & 2 bolt flange.
25 August 2009, 10:41 PM
#39
Scooby Regular
Join Date: Mar 2009
Location: Northampton
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Would fitting a second hand STI up pipe to my 2004 WRX be the same as fitting as decat one and have they got the EGT boss in them? as I think mine will have? if so can you post a picture and price of the one that would be best for me.
I have standard headers and td04 turbo.
Thanks, Danog.
26 August 2009, 07:15 AM
#40
The WRX needs an uppipe with a boss if you are to retain the heat sensor. The STi uppipe does not have a boss. You can have a purpose designed uppipe, new for your vehicle which will be a performance item. £139. Either of the last two above for £50 or £40 will fit your car and they have a boss but although they are aftermarket items and decat I do not consider they would give you anything like the performance gain of the new item which is after all purpose designed for your application.
Last edited by harvey; 26 August 2009 at 07:20 AM.
26 August 2009, 07:21 AM
#41
http://i27.tinypic.com/2cnxvs5.jpg
Top item is O/E without heat shield.
Next is aftermarket with boss.
Next, as above wrapped.
WRX with CAT.
Not sure what item to right is without looking at it.
Top item is O/E without heat shield.
Next is aftermarket with boss.
Next, as above wrapped.
WRX with CAT.
Not sure what item to right is without looking at it.
Last edited by harvey; 26 August 2009 at 07:24 AM.
26 August 2009, 08:35 AM
#42
Scooby Regular
Join Date: Mar 2009
Location: Northampton
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Im interested in the thrid one down (after market with boss,wrapped) how much for this one including postage to NN6 and can you replace the missing studs?
What is the difference between this and a new one, are the pipe diametres the same?
thanks, danog
What is the difference between this and a new one, are the pipe diametres the same?
thanks, danog
27 August 2009, 12:34 AM
#43
Third one down you can have posted next day inclusive of Paypal for £62.50 to harveysmith1@btopenworld.com and I will send it with replacement new studs for the missing/damaged.
The difference between that one and a new performance item is that the new item is slip jointed with new DEI wrap and new studs and the new uppipe is a specific performance designed item. The second hand item above will not be to the same design and although I have not measured it, the internal bore diameters will be different.
The difference between that one and a new performance item is that the new item is slip jointed with new DEI wrap and new studs and the new uppipe is a specific performance designed item. The second hand item above will not be to the same design and although I have not measured it, the internal bore diameters will be different.
06 September 2009, 10:54 AM
#45
Scooby Regular
iTrader: (30)
Join Date: Dec 2005
Location: leicester
Posts: 3,508
Likes: 0
Received 0 Likes
on
0 Posts
can you tell me if a my00 uk classic has a cat on the standard up pipe
if it does can you give me a price to replace for a de catted one please delivered
if it does can you give me a price to replace for a de catted one please delivered
Last edited by phil739; 06 September 2009 at 10:55 AM.
20 February 2010, 06:54 PM
#47
harvey, I'll be fitting a 20g to my forged 2.0L ODB running WRX v.1 hydraulic heads.
Do you know the diameter of an uppipe's bore that would be most suited to that set-up. I need to get a set of your OEM ported headers for sure... but, regards the u/p, I actually already have a slipjointed upipe here (which may, or may not, be suitable, IYSWIM). Thanks.
Do you know the diameter of an uppipe's bore that would be most suited to that set-up. I need to get a set of your OEM ported headers for sure... but, regards the u/p, I actually already have a slipjointed upipe here (which may, or may not, be suitable, IYSWIM). Thanks.
Last edited by joz8968; 20 February 2010 at 07:00 PM.
21 February 2010, 11:39 AM
#49
O/E uppipe ported and DEi heat wrapped is £35.
O/E uppipe with O/E heatshields in VGC is £35.
The gains from porting the O/E uppipe on its own are not great.
Ported headers and matched performance uppipe to suit your turbo/spec is £369 exchange and ported headers only is £230 exchange.
Joz. You were buying a turbo last time we communicated????
You have my e-mail address. Please send a photo of your uppipe and relevant dimensions along with spec and I can advise.
O/E uppipe with O/E heatshields in VGC is £35.
The gains from porting the O/E uppipe on its own are not great.
Ported headers and matched performance uppipe to suit your turbo/spec is £369 exchange and ported headers only is £230 exchange.
Joz. You were buying a turbo last time we communicated????
You have my e-mail address. Please send a photo of your uppipe and relevant dimensions along with spec and I can advise.
21 February 2010, 01:31 PM
#50
Yes, I have to confess harvey, that Scott T had a UK-rebuilt fully recon'd/ported 20g up for sale on eBay (and here). I was the lucky winner - got it for £356 all in.
I do feel bad, as this is the 2nd time! I've done this to you: do you remember I wanted a Hybrid GTSpec FMIC... but, again, soon after, a second-hand Hyperflow popped up on eBay, which I also won? I hope I'm forgiven? However, if I find the 20g too laggy, it'll defo be coming off for an 18g anyway... just that the money-saving 'opportunity' was too good to pass up at the time.
Okay, I'll take some photos and post on here soon...
Thanks a lot.
I do feel bad, as this is the 2nd time! I've done this to you: do you remember I wanted a Hybrid GTSpec FMIC... but, again, soon after, a second-hand Hyperflow popped up on eBay, which I also won? I hope I'm forgiven? However, if I find the 20g too laggy, it'll defo be coming off for an 18g anyway... just that the money-saving 'opportunity' was too good to pass up at the time.
Okay, I'll take some photos and post on here soon...
Thanks a lot.
Last edited by joz8968; 21 February 2010 at 11:04 PM.
21 February 2010, 10:35 PM
#52
Scooby Regular
iTrader: (15)
Join Date: May 2009
Location: East london.....with my head under my bonnet.
Posts: 1,498
Likes: 0
Received 0 Likes
on
0 Posts
Hi Harvey, how much for a decatted and 2002 wrx uppipe, heat wrapped. Looking to upgrade the turbo to a hybrid td-04 or a vf35 maybe, just wondered if the required uppipe could sustain either a hybrid td-04 or a vf35? PM me your thoughts and recommended parts/prices.
Many thanks
Matt.
Many thanks
Matt.
23 February 2010, 01:12 PM
#53
Joz : That uppipe will do the job. A purpose designed uppipe for use with my ported headers which comes DEI heat wrapped, slip jointed and with five new studs would set you back £139. In conjunction with my ported headers, my uppipe would be the best performance option but I cannot specify the gains in torque or BHP.
New, decat uppipe for your car Matt will show good gains. £139. £10 overnight delivery or we fit here for a fixed £75.
New, decat uppipe for your car Matt will show good gains. £139. £10 overnight delivery or we fit here for a fixed £75.
