HEAD GASKET!!!
#31
Scooby Regular
iTrader: (13)
Well if his is a v.2 STi engine then it should have the single bolt coilpack heads. In that case they would defo be from a MY93-96 ph.1 Impreza.
Then you have to worry about if they are actually v.2 STi ones (rather than v.1/2 WRX ones). I don't know how you can tell externally though.
Can't comment on his plain covers, as don't know what they're from. Actually thinking about it I think the Impreza covers have only 2 lines formed in them and the Legacy has 3??? So don't know what these plain ones are?...
As said, merlin24 is extremely clued up on Impreza heads - he's your best port of call...
Then you have to worry about if they are actually v.2 STi ones (rather than v.1/2 WRX ones). I don't know how you can tell externally though.
Can't comment on his plain covers, as don't know what they're from. Actually thinking about it I think the Impreza covers have only 2 lines formed in them and the Legacy has 3??? So don't know what these plain ones are?...
As said, merlin24 is extremely clued up on Impreza heads - he's your best port of call...
Last edited by joz8968; 30 January 2010 at 10:15 PM.
#32
Scooby Regular
iTrader: (13)
Join Date: Oct 2009
Location: here, there, everywhere
Posts: 3,111
Likes: 0
Received 0 Likes
on
0 Posts
sorry for the ot
but my l;ocal; "engineering shop" that used to skim our heads was shambolic
we sent an 8 valve golf head away
valves still in place came back fully skimmed, but one side of the head the valves had actually been skimmed the other side wer not touched lol!!
just to give you an idea ofsome of the kind of people that are out there!
back on topic - hope you get it all sorted mate
but my l;ocal; "engineering shop" that used to skim our heads was shambolic
we sent an 8 valve golf head away
valves still in place came back fully skimmed, but one side of the head the valves had actually been skimmed the other side wer not touched lol!!
just to give you an idea ofsome of the kind of people that are out there!
back on topic - hope you get it all sorted mate
#33
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
APi and almost certainly other Subaru specialists [ Scoobyclinic for example ] will not just do head gaskets on an engine of that age, as there is every chance that the bottom end will fail soon after. The added strain on the crank bearings after the top end is sorted out sees them off in about 5 - 6 weeks in our experience.
Rather than have the discussion about " you did my head gaskets 5 weeks ago and now the big ends are rattling, what did you do wrong ? We advise to freshen up the whole thing.
I would want a disclaimer from the customer if he / she / they insisted on just doing the head gaskets.
David APi.
Rather than have the discussion about " you did my head gaskets 5 weeks ago and now the big ends are rattling, what did you do wrong ? We advise to freshen up the whole thing.
I would want a disclaimer from the customer if he / she / they insisted on just doing the head gaskets.
David APi.
Thread
Thread Starter
Forum
Replies
Last Post