Finally got around to setting up my NAS...
#64
Moderator
iTrader: (1)
![Default](images/icons/icon1.gif)
So did mine ![Thumb](images/smilies/thumb.gif)
They are Seagate Barrcudas 7200.12 as opposed to the orginal pipeline. One is up and running doing a re-sync as I type.
One thing I'm missing; the fixing screws, and you can't use normal HD screws as they need to be countersunk to fit the caddy.
I've temporarily robbed two screws from the other caddy. I also noted the screws were loose; which may explain why the HD seemed noisy when acessing. Worth checking whilst your messing about fitting the other drive.
![Thumb](images/smilies/thumb.gif)
They are Seagate Barrcudas 7200.12 as opposed to the orginal pipeline. One is up and running doing a re-sync as I type.
One thing I'm missing; the fixing screws, and you can't use normal HD screws as they need to be countersunk to fit the caddy.
I've temporarily robbed two screws from the other caddy. I also noted the screws were loose; which may explain why the HD seemed noisy when acessing. Worth checking whilst your messing about fitting the other drive.
#65
![Default](images/icons/icon1.gif)
Yep my new drive is the same Barracuda 7200.12 which is a faster spin speed to the Pipeline.
The screws are in a little packet in with the warranty card for the Duo, 8 of them![Thumb](images/smilies/thumb.gif)
Mines in and you dont even have to switch it off.
I've had three emails from the NAS:
I have a little green light chugging away at the moment
The screws are in a little packet in with the warranty card for the Duo, 8 of them
![Thumb](images/smilies/thumb.gif)
Mines in and you dont even have to switch it off.
I've had three emails from the NAS:
- Disc add event occured on SATA channel 2.
- RAID event detected, Disk initialization successfully finished.
- RAID sync started on volume C.
I have a little green light chugging away at the moment
![Big Grin](images/smilies/biggrin.gif)
#68
Scooby Regular
Join Date: Apr 1999
Location: Bore Knee Muff
Posts: 3,666
Likes: 0
Received 0 Likes
on
0 Posts
![Default](images/icons/icon1.gif)
what speed are your reporting and what type of Raid?
Mine says:
X-RAID (Expandable RAID), 2 disks
Status: Resync 37% complete, Time to finish 2 hr 38 min, Speed 62.4 MB/sec
The disk only has 100GB on it so 3 hours + to RAID it seems slow...
Mine says:
X-RAID (Expandable RAID), 2 disks
Status: Resync 37% complete, Time to finish 2 hr 38 min, Speed 62.4 MB/sec
The disk only has 100GB on it so 3 hours + to RAID it seems slow...
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM