Problems Fitting Perrin 25mm ARB.. have i fitted it correctly?
#33
Scooby Regular
iTrader: (59)
I personally would not trust TSL one bit. I bought a set of Perrin 6 speed shifter bushes from them and they did not fit my Hawkeye 6 speed linkage. Initially he repsonded to my emails but then stopped and refused to reply.
It is difficult to use the perrin stout mounts with a Whiteline bar other than the 22mm ones as the bush carriers are a different shape to accomodate the different shape of Perrin bush. So with a rear whiteline 22mm bar just use the Perrin 22mm bushes and the stout mounts. If you go to a 24mm bar then you have problems as the Perrin bushes are 25mm so cant be used with a 24mm bar. The perrin bushes have an edge on either side to retain the bush clamp, the whiteline ones do not and what happens is the bush migrates out of the bush clamp. When i went to a 24mm rear bar i modified the perrin bush carrier by welding small bush retaining strips to the side of the perrin bush clamp.
Hope that makes sense, it does to me
It is difficult to use the perrin stout mounts with a Whiteline bar other than the 22mm ones as the bush carriers are a different shape to accomodate the different shape of Perrin bush. So with a rear whiteline 22mm bar just use the Perrin 22mm bushes and the stout mounts. If you go to a 24mm bar then you have problems as the Perrin bushes are 25mm so cant be used with a 24mm bar. The perrin bushes have an edge on either side to retain the bush clamp, the whiteline ones do not and what happens is the bush migrates out of the bush clamp. When i went to a 24mm rear bar i modified the perrin bush carrier by welding small bush retaining strips to the side of the perrin bush clamp.
Hope that makes sense, it does to me
#34
Scooby Senior
iTrader: (41)
I personally would not trust TSL one bit. I bought a set of Perrin 6 speed shifter bushes from them and they did not fit my Hawkeye 6 speed linkage. Initially he repsonded to my emails but then stopped and refused to reply.
It is difficult to use the perrin stout mounts with a Whiteline bar other than the 22mm ones as the bush carriers are a different shape to accomodate the different shape of Perrin bush. So with a rear whiteline 22mm bar just use the Perrin 22mm bushes and the stout mounts. If you go to a 24mm bar then you have problems as the Perrin bushes are 25mm so cant be used with a 24mm bar. The perrin bushes have an edge on either side to retain the bush clamp, the whiteline ones do not and what happens is the bush migrates out of the bush clamp. When i went to a 24mm rear bar i modified the perrin bush carrier by welding small bush retaining strips to the side of the perrin bush clamp.
Hope that makes sense, it does to me
It is difficult to use the perrin stout mounts with a Whiteline bar other than the 22mm ones as the bush carriers are a different shape to accomodate the different shape of Perrin bush. So with a rear whiteline 22mm bar just use the Perrin 22mm bushes and the stout mounts. If you go to a 24mm bar then you have problems as the Perrin bushes are 25mm so cant be used with a 24mm bar. The perrin bushes have an edge on either side to retain the bush clamp, the whiteline ones do not and what happens is the bush migrates out of the bush clamp. When i went to a 24mm rear bar i modified the perrin bush carrier by welding small bush retaining strips to the side of the perrin bush clamp.
Hope that makes sense, it does to me
You might want to consider ebaying the stout mounts ? and going Whiteline.
#36
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jul 2008
Location: n/a
Posts: 5,304
Likes: 0
Received 0 Likes
on
0 Posts
cheers dave.
and thanks guys, i think i might just go whiteline.. but stick standard on for time being, if i got to get new arb mounts for the whiteline 24mm bar.
i'll get the arb in the post mon/tues dave.
Cheers
and thanks guys, i think i might just go whiteline.. but stick standard on for time being, if i got to get new arb mounts for the whiteline 24mm bar.
i'll get the arb in the post mon/tues dave.
Cheers
#38
Scooby Regular
iTrader: (67)
Join Date: Oct 2007
Location: w,yorkshire
Posts: 4,061
Likes: 0
Received 0 Likes
on
0 Posts
i had this same problem when i first fitted my whiteline 24mm rear arb.i was sent the wrong one for my car and it fitted just like the one in your pictures,i sent it back and was sent the correct one which fitted spot on.
#39
Scooby Regular
iTrader: (59)
There isnt really any way to bodge the bushes but the Perrin clamp can be altered if you have access to a welder and a little patience. Perrin do the rear bars in 22mm and 25mm poss bigger but these are the sizes in question. As you can see the Perrin bushes have a lip on either side, the perrin stout mount bush clamp sits in the middle of the bush and the two lips on the bush keep the clamp in place. If you use a whiteline 24mm bar the bushes do not have the lip either side so would just migrate out of the clamp, I know it happened to me. To solve this i weldded some strips to the side of the Perrin clamp to retain the white line bushes. If you dont want to do this then your only option is to sell the perrin stout mounts and go back to the standard mount or buy the whiteline stout mounts.
Last edited by Arch; 07 November 2010 at 06:48 PM.
#42
Scooby Regular
Thread Starter
iTrader: (20)
Join Date: Jul 2008
Location: n/a
Posts: 5,304
Likes: 0
Received 0 Likes
on
0 Posts
just an update gopt my new 24mm whiteline bar fitted on hard setting, with no problems.. and i take back what i said, the difference is huge! defo worth all the hassle lol loads more fun!
thanks guys for your help
o and the perrin stout mounts are for sale if anyone is interested.. practically new. £70 for anyone on here
thanks guys for your help
o and the perrin stout mounts are for sale if anyone is interested.. practically new. £70 for anyone on here
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
bro82
General Technical
4
17 September 2015 07:41 AM