please can you only answer if uve had this problem.
#31
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
having now watched video I take it back.. looks like idle stepper motor is not openning fully and allowing air into the engine as it should.
If you take the idle stepper motor off and try cleaning it etc as the plunger gets grubby
Simon
If you take the idle stepper motor off and try cleaning it etc as the plunger gets grubby
Simon
#33
Scooby Regular
iTrader: (9)
Join Date: May 2009
Location: cambridgeshire
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
dv being stuck open is unlikely as this has been swapped, same as the maf ok cant be ruled out it not faulty,but has been changed. has the op checked the pipes its basic stuff really. this is more than a slight leak. do you really expect this to be diagosed with out actually being has on?
#34
Scooby Regular
Join Date: Aug 2005
Location: My turbo blows, air lots of it!!
Posts: 9,073
Likes: 0
Received 0 Likes
on
0 Posts
Dump valve, Front mount and because of the front mount I would assume an induction kit as well? I would be getting it mapped pretty quick myself.
#35
check the help pages on my website www.jollygreenmonster.co.uk to read the error codes using the connectors under the dash.
Simon
Simon
hi simon. sorry for the late reply and thanks to everyone for there replys. i tried the cables underneath and i never got any fault codes back. my only guess is the mafs failing and not totally failed yet.
im guessing its the maf so going to swap it around with my mates and try that. instead of buying a maf i no longer need.
thanks for all your help people!
#36
Scooby Regular
Join Date: Dec 2010
Location: bridgwater
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
Earlier in the thread you said youv already changed the maf with a new one, im confussed, or have i missed a point lol. Could try using your new maf that you think doesnt work on your mates car to see if it does work or not, then you could rule it out once and for all.
#38
Scooby Senior
Which induction kit do you have? A K&n 57i is generally regarded as a safe option if you have to have an induction kit. There are many out there that will kill a maf in a very short space of time. I ran a 57i for 80k miles and replaced the maf once
#39
You can't blame the advice of others on here if you fail to act on anything. You may as well have not asked for help as you have done your own thing anyway.
#40
This is why the OP isn't getting anywhere. You seem not to be able to read. JGM has made a perfectly good suggestion (and prodriverules even earlier)and you have completely ignored him.
You can't blame the advice of others on here if you fail to act on anything. You may as well have not asked for help as you have done your own thing anyway.
You can't blame the advice of others on here if you fail to act on anything. You may as well have not asked for help as you have done your own thing anyway.
THEREFORE i missed simons new advice! sorry that i didnt read simons new advice and rest assured everything everyones mentioned i have tried (apart from maf and idle stepper motor.
After thoughly going through my posts i see you have assumed something
"You can't blame the advice of others on here if you fail to act on anything."
where the **** did i mention not acting on anything? is it because im not giving a reply every 23 seconds. I only see my car at weekends. i didnt see it last weekend cause i was working. nor the weekend before, therefore i couldnt reply to my progress
another thing uve assumed
"as you have done your own thing anyway"
sorry but i fail to see during my posts where i said i have done my own thing. when infact everythings someones recommended i have tried.
Edit- thanks to everyone whos put in there advice. much appreciated.
but im one step away from breaking the thing into pieces.
Last edited by garydevine; 17 December 2010 at 11:57 AM.
#41
You have replied on Page '2'! After prodriverules. And again after JGM's comments. You were very quick to answer my post also!
You are running sh!te loads of mods without remapping. Another comment you ignored. If you listen you may well get somewhere with it.
You are running sh!te loads of mods without remapping. Another comment you ignored. If you listen you may well get somewhere with it.
Last edited by dan83590; 17 December 2010 at 12:11 PM.
#42
I have not ignored the advice of mapping i just havent replied. this close to christmas mapping is not an affordable option just yet.
Also i quoted simons text posted a reply then closed the explorer down. Which is why i didnt see there was 2 pages.
I have just attempted to clean the stepper motor. no joy so far. however does the piston inside move freely as i found mines very stiff to pull in and out?
Thread
Thread Starter
Forum
Replies
Last Post