what do i need to get up to 400bhp?
23 January 2011 | 05:14 PM
#32
No S**T Sherlock, they must be at 100% duty from 5000rpm on. My advice would be not to go over 500rpm again till you get some 740cc injectors in it.
In my experience 440cc injectors are good for 320-340bhp on our rollers and as 20% Meth is going to require 10% more fuel, you'll max them even earlier.
Martyn
In my experience 440cc injectors are good for 320-340bhp on our rollers and as 20% Meth is going to require 10% more fuel, you'll max them even earlier.
Martyn
on area52`s dyno it made 384bhp and jase said it was very safe and the fueling was fine with no det, there have been no mods to the car but only a mater of weeks in between power runs and it made 393 at the clinic, and yes not all dyno`s are the same
24 January 2011 | 09:14 AM
#33
its at 850 rpm on tickover so are you saying its not even sae to start up
on area52`s dyno it made 384bhp and jase said it was very safe and the fueling was fine with no det, there have been no mods to the car but only a mater of weeks in between power runs and it made 393 at the clinic, and yes not all dyno`s are the same
on area52`s dyno it made 384bhp and jase said it was very safe and the fueling was fine with no det, there have been no mods to the car but only a mater of weeks in between power runs and it made 393 at the clinic, and yes not all dyno`s are the same
24 January 2011 | 12:32 PM
#34
Scooby Regular
Joined: Jan 2006
Posts: 2,629
Likes: 3
From: Enginetuner Plymouth for 4wd RR Mapping Apexi Ecutek Alcatek Proper Garage More than just a laptop!
Thread
Thread Starter
Forum
Replies
Last Post
ATWRX
Full Cars Breaking For Spares
88
01 February 2016 08:28 PM
