acstua

iTrader: (1)

ive had sivlertec and osram and prefer the look of the osram

http://www.osram.com/osram_com/Consu...DEM/index.html

when off they kinda looked like the oil on water effect, was quite cool

wrx sti ppp

Thanks guys ;-)

Allan

iTrader: (1)

Chaps, check your happy with the light output of the Silvertecs on a Newgage fitment. They were way too dim, the preffered choice was/is Silvervision which are as good if not better, than the original bulbs.

scoobydog63

iTrader: (4)

Mine were done by a previous owner and looks a bit frosted on the inside of the lense. I was told by a body shop that they were burnt on the inside of the lense. Is it possible that theyve heated them up to much and can I do any thing to improve it if they are burnt.

Allan

iTrader: (1)

I know some of the detailing guys polish the outside of the cover to remove scratches, so that may work on the inside, assuming you can get suitable access with the machine.

I suspect your looking at some new lights though.

bern11

iTrader: (13)

Theres an extreamely thin coating of some sort on the inside of the light.I had some marks on mine on the inside and tried cleaning,but made them worse hence the reason i'm on the lookout for some new ones!
There not very noticeable,but i know they're there and peeing me off GRRRR!!!

davefaedeen

Hi guys ok I have undone the three bolts but the light stillnwint come out any ideas

tubbytommy

iTrader: (20)

There are two popper type clips in the front wing
Just give it a hard pull straight forward and it'll just pop out then be carefull not to lose the clips and itll just pop back in when ready

davefaedeen

thanks tommy i managed to figure it out in the end and nothing a little poke with a screw driver couldnt fix!! its not as easy a job as i thought it would be but i think it looks alot better!!!!!

another de tangoed car added to the list!!