show us your SNOW FOAM pix.
#91
Scooby Regular
Join Date: Jan 2011
Location: Swansea
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
I've got the Cherry Snow foam.
texted ReaChem this afternoon, and the responce was turn the lance to Fan Spray, use half an inch of snow foam and alterthe - & + till you get the mix right.
It was better but i use 1.5" of solution.
Still not really really thick though.
But you can see the dirt run down, Then I sponge over it all again and jet was off.
The car look clean :0
texted ReaChem this afternoon, and the responce was turn the lance to Fan Spray, use half an inch of snow foam and alterthe - & + till you get the mix right.
It was better but i use 1.5" of solution.
Still not really really thick though.
But you can see the dirt run down, Then I sponge over it all again and jet was off.
The car look clean :0
I ordered this 2 days ago after a recommendation from a friend.
#93
Scooby Senior
Thread Starter
the idea is snow foam first, jet wash off, then wash car as normal.
#97
Scooby Regular
Ive got as much flow as the water board will give me LOL.
I got one anyway great machine blasted loads of **** off Next purchase is a foam add-on, the unit i have does have 2 detergent bottles built in but these are low pressure ones.
As for washing the wax off, Look for PH balanced foams this helps keep it on
I got one anyway great machine blasted loads of **** off Next purchase is a foam add-on, the unit i have does have 2 detergent bottles built in but these are low pressure ones.
As for washing the wax off, Look for PH balanced foams this helps keep it on
#99
Scooby Senior
Thread Starter
this is mine, it had been on for a few mins.
using magifoam and a Karcher lance cant seem to get any thicker as on max on the dial
http://s1212.photobucket.com/albums/...1.jpg&newest=1
using magifoam and a Karcher lance cant seem to get any thicker as on max on the dial
http://s1212.photobucket.com/albums/...1.jpg&newest=1
looks like there is too much water coming through it... also turn the Fan to wide.
#102
Scooby Senior
Thread Starter
#104
Scooby Senior
Thread Starter
this guys car was well clean after but so was the whole street! lol
#105
I'm using the meguires stuff, says 400:1 dilution!
Using a foam lance for hosepipe from I think Polished Bliss... was going to get a presure washer version as I thouight my foam was a bit thin, poor, not sticking for minutes... but looks like most of the ones above so probably not too bad a job!
I need to play with settings then.
Using a foam lance for hosepipe from I think Polished Bliss... was going to get a presure washer version as I thouight my foam was a bit thin, poor, not sticking for minutes... but looks like most of the ones above so probably not too bad a job!
I need to play with settings then.
#106
Scooby Senior
Thread Starter
^^^^
any pix?
any pix?
#108
#109
I have a new Karscher jet washer, not used yet, but still using my old power deveil cheap and cheerfull unit!
No idea what fittings it has for foam agent bottles, but may as well break out the Karscher next time!
And get a jet wash bottle for a better foam, and maybe try some of this cherry foam!
No idea what fittings it has for foam agent bottles, but may as well break out the Karscher next time!
And get a jet wash bottle for a better foam, and maybe try some of this cherry foam!
#110
Scooby Senior
Thread Starter
mine doesn't look as weak as that.. by the time I get the camera set up lol
#119
Scooby Regular
Join Date: Jul 2004
Location: A Yorkshireman living in Lancashire, Recruiting for the War of the Roses part deux!
Posts: 945
Likes: 0
Received 0 Likes
on
0 Posts