Project stealth pics, Manual converted!
#64
Scooby Regular
iTrader: (2)
Join Date: Oct 2011
Location: Midlands
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
Nice job so far, looking forward to seeing how it pans out .
On a completely random side note, every time I see your avatar it reminds me of my old Flint Grey Sapphire Cosworth! Must be the angle, anyone else see it or am I just ??
On a completely random side note, every time I see your avatar it reminds me of my old Flint Grey Sapphire Cosworth! Must be the angle, anyone else see it or am I just ??
#69
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
thanks a lot buddy. I have set my primary focus on getting the interior sorted for a minute as iv'e had to drive it for a while i know have the full dash in. Got a sti back seat back in, however i bought it cheap due to a tiny *** burn in it. Thats going to be replaced soon I have newage seats in along with carbon wrapped bits, carbon gaitor and mats.. I will post some new pictures for you all on saturday! i think it looks great so far and im really happy with it. The next step for me will be to get the rest of the interior flocked. Doorcards, pillar trims etc... keep you all posted!
#70
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
true, there isnt really a great deal of need for the scoop now, however, its CF and looks great. As well as that, I suppose the extra air it will bring in always help with the induction and other engine components!
#71
Scooby Newbie
Join Date: Oct 2011
Location: sunderland
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Nice wagon m8...Have one very similar in black too,even had the ****ty blue flecked seats but found an ebay bargain and swapped it for leather,i have facelifted the front end too....just reckon the early spec front end looked very dated...Good to see peeps doing the work themselves....reminds me i must crack on with mine!...good work fella
#72
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Cheers buddy an update for all, my wagon is now off the road parked up until the weather betters. Then I will pull out the spanners and continue the project! I have all the interior in etc, just need to update pics for you.
My next plan is to whip the engine out, and detail it! buying a hoist for the job, will add new injectors, coilpacks, pulleys and other bits and bobs! Keep you all posted!
My next plan is to whip the engine out, and detail it! buying a hoist for the job, will add new injectors, coilpacks, pulleys and other bits and bobs! Keep you all posted!
#75
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Cheers guys, its the appreciation of others comments that makes it worth the transformation, so thanks in advance for those
Im removing the rear wiper soon, and fitting some sti suspension along with the refurbed 4 pots.
Looking to keep it stealthy so dark colours for everything. Got a great colour for the calipers i think, will post some pics when there fully painted
Im removing the rear wiper soon, and fitting some sti suspension along with the refurbed 4 pots.
Looking to keep it stealthy so dark colours for everything. Got a great colour for the calipers i think, will post some pics when there fully painted
#77
Scooby Regular
looking good mate
u thought about a black fmic saw 1 on here a while ago not sure if it was diy or not though but did look smart
keep up the good work
mike
u thought about a black fmic saw 1 on here a while ago not sure if it was diy or not though but did look smart
keep up the good work
mike
Last edited by mikeywilliams; 15 January 2012 at 02:30 PM.
#79
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
I did think about that, but had a few things i worried about. The first was stonechips, after a while i thought they might make it look a little rough, and secondly was the paint blocking the wafers on the FMIC.
Are the air ratio's still good when its painted?
Are the air ratio's still good when its painted?
#83
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Hello all,
been a while! scooby has been sitting around on the drive because all this crap weather we have had!
However, at given chance i have been playing around with it! I have fitted the new flocked dashboard, new plasma dials, mats, gaitors, seats etc and now await the remaining 4 door cards to be flocked so its complete inside.
I have started to prepare the car for spraying, and have treated the DS arch by knocking all the rust out, bringing the arch flush, and treating it with rust ointment. I have started to prime the car ready for a top coat, and pics will come the minute i get my iphone plugged in lol!
been a while! scooby has been sitting around on the drive because all this crap weather we have had!
However, at given chance i have been playing around with it! I have fitted the new flocked dashboard, new plasma dials, mats, gaitors, seats etc and now await the remaining 4 door cards to be flocked so its complete inside.
I have started to prepare the car for spraying, and have treated the DS arch by knocking all the rust out, bringing the arch flush, and treating it with rust ointment. I have started to prime the car ready for a top coat, and pics will come the minute i get my iphone plugged in lol!
#84
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Right guys, here are some images on my progress so far. As you all know the weather has been the worst its been in history! so it really has been a case of grabbing the moment!
I have a few pics of the interior currently for you all :
1st, to remind you what it looked like originally....
Now ( 70% complete )
then, on to the arch :
Before
it was stepping out and looked shocking, so it needed flushing straight and all the nasty bits removing
Now after stage 1 :
Brought back, then treated with rust remover and anti-rust treatment
Now, lets get the shell stealth-afied
this is preparation, and step 1 etc.....
Prime :
Thats it for now, its a lot of work without a lot of time really, the arch will look like new when ive finished it, its primed to add even more protection!
Its the beggining of a new years build lol will update the thread when i continue my progress.
Comments welcomed!
Im having a few issues with photobucket tonight, i will post the other pics tomorrow
I have a few pics of the interior currently for you all :
1st, to remind you what it looked like originally....
Now ( 70% complete )
then, on to the arch :
Before
it was stepping out and looked shocking, so it needed flushing straight and all the nasty bits removing
Now after stage 1 :
Brought back, then treated with rust remover and anti-rust treatment
Now, lets get the shell stealth-afied
this is preparation, and step 1 etc.....
Prime :
Thats it for now, its a lot of work without a lot of time really, the arch will look like new when ive finished it, its primed to add even more protection!
Its the beggining of a new years build lol will update the thread when i continue my progress.
Comments welcomed!
Im having a few issues with photobucket tonight, i will post the other pics tomorrow
Last edited by scoobynelly; 28 July 2012 at 12:45 AM.
#85
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Quick update, swapped my bonnet over today ( again ) for a carbon one sprayed in matt black. Weighs 8kg, and only had little laquer bubbles on it, hence sprayed.
Lucky me, my cars being sprayed the same colour so great weight reduction and added value DD What you think?
Fitting the carbon scoop shown on silver bonnet to it, and have carbon fog covers in the post to me.
Reviews so far?
Lucky me, my cars being sprayed the same colour so great weight reduction and added value DD What you think?
Fitting the carbon scoop shown on silver bonnet to it, and have carbon fog covers in the post to me.
Reviews so far?
#87
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Yes it does mate, im having ABW arches fitted, and there going to put new arches in once they roll them back to make way for the kit to fit its a temp thing to stop it from getting any worse
#90
Scooby Regular
Thread Starter
iTrader: (21)
Join Date: Jan 2010
Posts: 1,111
Likes: 0
Received 0 Likes
on
0 Posts
Oh i will dont you worry about that lol. Im concentrating on body, handling, clutch and gearbox before i upgrade the power. I want it to cope with everything to avoid breaking things