FIRST PICTURES OF MY NEW 2011 320R
#482
Thread Starter
Scooby Regular
iTrader: (4)
Joined: Sep 1999
Posts: 11,469
Likes: 23
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
IIRC IMHO
Tony
#483
RU sure. WRX STi not listed.......... for the non turbo hatch models.
http://www.subarupartsstore.co.uk/pr...000_PREBFG1000
Have been waiting on a phone call about them but not heard anything yet.
http://www.subarupartsstore.co.uk/pr...000_PREBFG1000
Have been waiting on a phone call about them but not heard anything yet.
#484
Thread Starter
Scooby Regular
iTrader: (4)
Joined: Sep 1999
Posts: 11,469
Likes: 23
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Don your right it's not the SIi springs.
I've tried to do on small iPhone screen instead on ymy PC
But have been ts out very soon.
I've tried to do on small iPhone screen instead on ymy PC
But have been ts out very soon.
Last edited by T5NYW; 21 November 2011 at 02:31 AM.
#488
#490
or as Don said this kit will do it but about £150 by the time you get it here http://www.japanparts.com/db/parts_d...&SEARCH_page=3
Or if you a bit handy electrically buy a £5-10 12vdc 8 pin relay like this one below and wire it up yourself
http://www.sourcingmap.com/12v-coil-...aign=ukfroogle
Then remove cables 7 B, 10 LR & 9 Bw from switch and connect up a twin Pole relay with great care.
Connect cable #7 (B) to coil pin #2
connect Ignition live to other side of coil pin #7
connect cable #10 (LR) common relay pin #1
connect cable #9 (BW) common relay pin #8
Connect/link earth cable #7 (B) to NO pin #3 and NC pin #5
Connect/link new fused live supply (permently on or interior light delay off?? ) to NC pin #4 and NO pin #6
cable 8 yellow and switch will now be redundant,
but when ignition switched on the mirrors open and close when ignition is off.
double check numbers on relays they can differ between manufactures
Tony
Or if you a bit handy electrically buy a £5-10 12vdc 8 pin relay like this one below and wire it up yourself
http://www.sourcingmap.com/12v-coil-...aign=ukfroogle
Then remove cables 7 B, 10 LR & 9 Bw from switch and connect up a twin Pole relay with great care.
Connect cable #7 (B) to coil pin #2
connect Ignition live to other side of coil pin #7
connect cable #10 (LR) common relay pin #1
connect cable #9 (BW) common relay pin #8
Connect/link earth cable #7 (B) to NO pin #3 and NC pin #5
Connect/link new fused live supply (permently on or interior light delay off?? ) to NC pin #4 and NO pin #6
cable 8 yellow and switch will now be redundant,
but when ignition switched on the mirrors open and close when ignition is off.
double check numbers on relays they can differ between manufactures
Tony
Mirror folding button on dash panel still performs as normal.(and still not illuminated Tony )
Mirrors fold on locking car using either door button or alarm fob.
Mirrors unfold AFTER unlocking car and pressing start button to at least ACC position.
As UK cars have double locking system, trigger feed to fold then is slightly different to the supplied instructions.
Separating harness, not absolutely necessary, but those with Pioneer Satnav will/should already have one fitted that can be used.
#492
Thread Starter
Scooby Regular
iTrader: (4)
Joined: Sep 1999
Posts: 11,469
Likes: 23
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Just completed the JDM auto folding mirrors on locking installation
Mirror folding button on dash panel still performs as normal.(and still not illuminated Tony
Mirrors fold on locking car using either door button or alarm fob.
Mirrors unfold AFTER unlocking car and pressing start button to at least ACC position.
As UK cars have double locking system, trigger feed to fold then is slightly different to .
Mirror folding button on dash panel still performs as normal.(and still not illuminated Tony
Mirrors fold on locking car using either door button or alarm fob.
Mirrors unfold AFTER unlocking car and pressing start button to at least ACC position.
As UK cars have double locking system, trigger feed to fold then is slightly different to .
Just got my 930bt upgrade and iPhone now won't play music up USB. I needed the £70 dealer lead with USB and phono jack !!!!!
So got one delivered off flea bay for £3.39
Tony
Last edited by T5NYW; 13 December 2011 at 03:36 PM.
#493
Will bring the paperwork for the kit on Thursday for your perusal
#496
What do you think of the new sat nav? - must admit I get confused by the models and as i'm about to get a new one dont want to end up with the Tescos model you enjoyed so much!
#498
#500
Thread Starter
Scooby Regular
iTrader: (4)
Joined: Sep 1999
Posts: 11,469
Likes: 23
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
iPod control is great as is hands free
Not sure about DAB I think you can get an add on unit.
Pioneer avic 320bt is total @@@@
Pioneer avic 910/920/930BT good
Pioneer avic 20/30bt very good
IMHO
Tony
#501
Model is much better but ensure they connect the speed pulse cable. Dealers reckon it's not needed but it definitely is.
iPod control is great as is hands free
Not sure about DAB I think you can get an add on unit.
Pioneer avic 320bt is total @@@@
Pioneer avic 910/920/930BT good
Pioneer avic 20/30bt very good
IMHO
Tony
iPod control is great as is hands free
Not sure about DAB I think you can get an add on unit.
Pioneer avic 320bt is total @@@@
Pioneer avic 910/920/930BT good
Pioneer avic 20/30bt very good
IMHO
Tony
(only 2 more sleeps now!!)
#502
Thread Starter
Scooby Regular
iTrader: (4)
Joined: Sep 1999
Posts: 11,469
Likes: 23
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
IIRC the 910bt is 2009 920bt is2010 and 930bt is a 2011 model
I think there are software updates that will make a 910 into a 930 model
Make sure they connect speed pulse it IS required on the 930 for learning Route speeds and 3D etc.
I have to go back to them as they didn't connect mine.
Tony
#503
Mines a 930 if I remember correctly
IIRC the 910bt is 2009 920bt is2010 and 930bt is a 2011 model
I think there are software updates that will make a 910 into a 930 model
Make sure they connect speed pulse it IS required on the 930 for learning Route speeds and 3D etc.
I have to go back to them as they didn't connect mine.
Tony
IIRC the 910bt is 2009 920bt is2010 and 930bt is a 2011 model
I think there are software updates that will make a 910 into a 930 model
Make sure they connect speed pulse it IS required on the 930 for learning Route speeds and 3D etc.
I have to go back to them as they didn't connect mine.
Tony
#505
funny that they would discontinue something thats current technology - but maybe using app's is the way they think people will access that kind of content in the future...and I guess their new gear supports that..
#506
Yes as long as they use the Subaru supplied fitting kit (if upgrading a 320R then it should already be in, but need to make sure all connections are made re: signal inputs)
#507
#508
I have the 920BT and find it fulfils all my requirements for reasonable money.
The 20BT has a sightly larger screen, which folds away, and you can add two external video sources. It uses a full size SD card instead of microSD.
You also get voice activation.
#509
Seems marginal - i'll see how much i'd need to chip in as the 920bt is included....
#510
Thread Starter
Scooby Regular
iTrader: (4)
Joined: Sep 1999
Posts: 11,469
Likes: 23
From: MY99UK-MY02STi-MY99Type R-MY06 T20-MY11 340R-MY05 TYPE25
Mikey
if you read chapter 32 page 150 onwards or search speed pulse you can see that the 900> and 20-30 models can use it to improve accuracy and set avg roads speeds to improve route selection IIRC IMHO
http://pioneerelectronics.com/Static...nual071211.pdf
Tony
Last edited by T5NYW; 03 January 2012 at 02:44 PM.