not happy !! again !!
#33
#34
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2010
Location: surrey
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
flat surface = bang on middle
yea i did remove restrictor pill but put it back and all is normal . i had a problem with my boost before i removed the pill hence why i recently started a thread questioning if my 2 port could be faulty ?
yea i did remove restrictor pill but put it back and all is normal . i had a problem with my boost before i removed the pill hence why i recently started a thread questioning if my 2 port could be faulty ?
#36
Scooby Regular
iTrader: (7)
Lol at this thread, your a muppet and you need to learn to chill a bit before you post a thread.
I think your suffering from post rebuild nerves and the slightist thing seems to get you up in arms
If you have any future concerns talk to david he is always more than happy to help and is one of the most respected builders out there and merlin is a wizard with engines so stop fretting and most of all STOP FIDDELING with your engine as if you **** it up it will not be covered by david.
I think your suffering from post rebuild nerves and the slightist thing seems to get you up in arms
If you have any future concerns talk to david he is always more than happy to help and is one of the most respected builders out there and merlin is a wizard with engines so stop fretting and most of all STOP FIDDELING with your engine as if you **** it up it will not be covered by david.
#37
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2010
Location: surrey
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
well in terms of oil everything fine . but i do still have an issue with boost !! in 3rd 4th and 5th it seems to back off then pull again ? and also makes a kind of surging noise ? im thinking maybe it has something to do with why my boost guage packed up ?? like there is a split pipe and im loosing boost through it or something ? somethings up
#40
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2010
Location: surrey
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
: to be fair it was doing it when i got it back from david and before i removed the pill . i am not pointing the finger at him at all though i think it could be the turbo as its a vf34 and have read they should ideally be ported to avoid boost creep ? but all went well on the dyno ? so surely it would of showed ? and dychy your bang on mate i am a complete bag of nerves now after what cars have put me through maybe i need a slap ! even when i first start it and there is slight smoke i get nervous i have realised that my impreza doesnt like being driven like a micra ? it seems to love being driven hard ? and by that i mean as its a very loud car i tend to change gears at low revs maybe i should get used to giving it more ?
Last edited by initialD; 23 January 2012 at 07:26 PM.
#42
Scooby Senior
iTrader: (41)
to be fair it was doing it when i got it back from david and before i removed the pill . i am not pointing the finger at him at all though i think it could be the turbo as its a vf34 and have read they should ideally be ported to avoid boost creep ? but all went well on the dyno ? so surely it would of showed ? and dychy your bang on i am a complete bag of nerves now after what cars have put me through ! even when i first start it and there is slight smoke i get nervous i have realised that my impreza doesnt like being driven like a micra ? it seems to love being driven hard ?
#44
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
Without pointing the dredded 'accusing finger' Dave, you've fiddled with the restrictor pill and if I remember another post of yours given it a 'blast' whilst it was running in? That's not good practise for running an engine in and if it goes boom... Well this could be an interesting read
Hopefully you haven't fcuked things up for yourself!
Hopefully you haven't fcuked things up for yourself!
#45
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2010
Location: surrey
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
surely if it was gonna go then it would of when they ragged it on the rolling road ? all was good , great results , so thats that . thing is if you was with me on the day when i put my foot down , then you would know its not that because its been greatly exagerated !! if all it takes to ruin a new built engine is what i done that day ? then the pistons must be made of chocolate ? and 90% of cars would be f**ked .
#46
Moderator
iTrader: (4)
Join Date: Jul 2004
Location: The Terry Crews of moderation. P P P P P P POWER!!
Posts: 18,687
Likes: 0
Received 0 Likes
on
0 Posts
Chances are it's a simply issue with the pipework.
BUT for the love of god, get it back to David to Diagnose poperly! AND KEEP IT OFF THE BOOST UNTIL THEN!!
VF35s are more prone to creep/surge problems if you don't port the wastegate, not so common with VF34s.
BUT for the love of god, get it back to David to Diagnose poperly! AND KEEP IT OFF THE BOOST UNTIL THEN!!
VF35s are more prone to creep/surge problems if you don't port the wastegate, not so common with VF34s.
#48
Scooby Regular
iTrader: (4)
Join Date: Aug 2005
Location: Also known as The Gimp
Posts: 3,662
Likes: 0
Received 0 Likes
on
0 Posts
Dave,Dave,Dave.......WTF are you doing now? lol
Have you been in contact with API?
Have you fitted Recirc DV?
Have you binned/set fire to the Baileys DV12 DV?
Have you fitted the Recirc correctly and not broken the gasket or damaged the thread on the TMIC?
LOL
Steve
Have you been in contact with API?
Have you fitted Recirc DV?
Have you binned/set fire to the Baileys DV12 DV?
Have you fitted the Recirc correctly and not broken the gasket or damaged the thread on the TMIC?
LOL
Steve
#49
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2010
Location: surrey
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
Dave,Dave,Dave.......WTF are you doing now? lol
Have you been in contact with API?
Have you fitted Recirc DV?
Have you binned/set fire to the Baileys DV12 DV?
Have you fitted the Recirc correctly and not broken the gasket or damaged the thread on the TMIC?
LOL
Steve
Have you been in contact with API?
Have you fitted Recirc DV?
Have you binned/set fire to the Baileys DV12 DV?
Have you fitted the Recirc correctly and not broken the gasket or damaged the thread on the TMIC?
LOL
Steve
alright mate yeah got the recirc on there all fine nothing damaged apart from my fingers ! just saying my oil level was below minimum on dipstick but parked on level road and it made alot of difference still have that slight boost issue in 3rd 4th and 5th not sure what it could be ? i havnt fiddled with anything though you get my pm ?
#50
Scooby Regular
iTrader: (1)
surely if it was gonna go then it would of when they ragged it on the rolling road ? all was good , great results , so thats that . thing is if you was with me on the day when i put my foot down , then you would know its not that because its been greatly exagerated !! if all it takes to ruin a new built engine is what i done that day ? then the pistons must be made of chocolate ? and 90% of cars would be f**ked .
If you must fiddle with something then read lots about the thing you want to change before touching anything.
I look forward to the next thread.
Danny.
#51
alright mate yeah got the recirc on there all fine nothing damaged apart from my fingers ! just saying my oil level was below minimum on dipstick but parked on level road and it made alot of difference still have that slight boost issue in 3rd 4th and 5th not sure what it could be ? i havnt fiddled with anything though you get my pm ?
#52
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2010
Location: surrey
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
well it was supposed to be mapped with the recirc fitted as i did request it . but im not sure if they mapped it with the bailey fitted then fitted the recirc ? or vice versa ? i got my car back with the recirc on but they could of bolted it on after the map ? but being a good company im sure they done it first ?
#53
well it was supposed to be mapped with the recirc fitted as i did request it . but im not sure if they mapped it with the bailey fitted then fitted the recirc ? or vice versa ? i got my car back with the recirc on but they could of bolted it on after the map ? but being a good company im sure they done it first ?
#54
Scooby Regular
iTrader: (7)
Dave, no disrespect mate but please just drop any plans you have for the weekend and book it in with david for saturday morning and let him take a look at it, even if it costs you £200 in fuel parts and labour, it's got to be better than another £2k or so that it will cost if you break something, and i'm sure by now merlin and david have seen the threads you have been posting, and must be thinking what a prat, and are more than well within their rights to tell you to sling your hook should you one day god forbid turn up with a problem expecting them to fix it foc.
Just call david and get it sorted before the dreaded knock comes a calling.
You seem like a good lad and having watched what you have been through, and been through it myself TWICE i would hate to see you go through it all over again.
So stop ******* with it and get it booked in, and as said before keep it off boost until you get it looked at.
Just call david and get it sorted before the dreaded knock comes a calling.
You seem like a good lad and having watched what you have been through, and been through it myself TWICE i would hate to see you go through it all over again.
So stop ******* with it and get it booked in, and as said before keep it off boost until you get it looked at.
Last edited by ditchmyster; 24 January 2012 at 06:43 AM.
#57
Dave, no disrespect mate but please just drop any plans you have for the weekend and book it in with david for saturday morning and let him take a look at it, even if it costs you £200 in fuel parts and labour, it's got to be better than another £2k or so that it will cost if you break something, and i'm sure by now merlin and david have seen the threads you have been posting, and must be thinking what a prat, and are more than well within their rights to tell you to sling your hook should you one day god forbid turn up with a problem expecting them to fix it foc.
Just call david and get it sorted before the dreaded knock comes a calling.
You seem like a good lad and having watched what you have been through, and been through it myself TWICE i would hate to see you go through it all over again.
So stop ******* with it and get it booked in, and as said before keep it off boost until you get it looked at.
Just call david and get it sorted before the dreaded knock comes a calling.
You seem like a good lad and having watched what you have been through, and been through it myself TWICE i would hate to see you go through it all over again.
So stop ******* with it and get it booked in, and as said before keep it off boost until you get it looked at.
#58
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Jun 2010
Location: surrey
Posts: 1,710
Likes: 0
Received 0 Likes
on
0 Posts
phoned api today the problem im experiencing is turbo surge . its common for vf34's and they may of been a bit optamistic when mapping it and pushed the turbo to produce a bit to much boost mid-range ? im told as long as i learn to drive it and not push it to much when i hear the "surge" it should cause no issues ? if i want it remapped to tone down the boost a bit then that is an option , but to be honest im gonna give it a while and see how it goes ?
Thread
Thread Starter
Forum
Replies
Last Post