Classic digital climate control
#31
Scooby Regular
iTrader: (3)
Join Date: Sep 2004
Location: Essex
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
(i know its an old thread,. and its probably not known, but i'll ask anyway,)
does anyone know how to convert a uk2000 slider type controls to the climate control above?
i want to convert the slider controls and will get the parts from someone breaking an STI with climate control,. but i am not sure what bits i will need to buy,. is it just the heater matrix, control unit and a wiring pigtail? or does it require full wiring loom,. maybe other parts i have not thought of?
i am stripping my car back to a bare shell and relocating the fuse box (going for a clean engine bay look) so i don't mind if its alot of work,. but i just need to know what parts i will need to buy from an STI before i start the rebuilding of the wiring loom / interior etc.
thanks
does anyone know how to convert a uk2000 slider type controls to the climate control above?
i want to convert the slider controls and will get the parts from someone breaking an STI with climate control,. but i am not sure what bits i will need to buy,. is it just the heater matrix, control unit and a wiring pigtail? or does it require full wiring loom,. maybe other parts i have not thought of?
i am stripping my car back to a bare shell and relocating the fuse box (going for a clean engine bay look) so i don't mind if its alot of work,. but i just need to know what parts i will need to buy from an STI before i start the rebuilding of the wiring loom / interior etc.
thanks
#32
The above wiring is incorrect as you can only get hot air when set to 32 degrees and the flap controls to direct heat don't work.
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.
1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK
1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.
1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK
1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
#35
#36
Scooby Regular
iTrader: (3)
Join Date: Sep 2004
Location: Essex
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Well done for finding the mismatched wires. It took me three days to work out the wiring so it worked as it should as the original post didn't work correctly only hot air when set to 32.
#37
by the way, this how mine looks now, so happy , thanks to you guys and the person who directed me here
few pics of my ride, she;s a jdm version 4 sti ra, ( yes previous owners deleted bit of RA stuff)
Last edited by drafter88; 15 July 2021 at 12:46 PM.
#38
Is there anyone in the West Midlands who can wire mine up properly please? I'm having
The above wiring is incorrect as you can only get hot air when set to 32 degrees and the flap controls to direct heat don't work.
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.
1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK
1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.
1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK
1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
#39
The above wiring is incorrect as you can only get hot air when set to 32 degrees and the flap controls to direct heat don't work.
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.
1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK
1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
If you use the following as you increase temperature with it set to auto the flaps will move to direct air to the right areas ie floor hands or screen and increase the speed of fans if needed. I did post this on the Aussie site and several others, if you do it and get stuck send me a PM.
1 of 16 VIOLET or PURPLE
2 of 16 NOT USED
3 of 16 BROWN/YELLOW
4 of 16 BLUE
5 of 16 BLUE/WHITE
6 of 16 NOT USED
7 of 16 YELLOW
8 of 16 NOT USED
9 of 16 NOT USED
10 of 16 NOT USED
11 of 16 NOT USED
12 of 16 RED/YELLOW
13 of 16 GREEN/YELLOW from 7 of 20
14 of 16 NOT USED
15 of 16 NOT USED
16 of 16 YELLOW/BLACK
1 of 20 WHITE/RED
2 of 20 RED
3 of 20 GREEN/RED not moved
4 of 20 BLUE/RED
5 of 20 GREEN/ORANGE
6 of 20 GREEN/WHITE
7 of 20 GREEN/YELLOW from 5 of 16
8 of 20 YELLOW/RED
9 of 20 WHITE
10 of 20 GREEN/RED from 13 of 16
11 of 20 BLACK
12 of 20 ORANGE
13 of 20 WHITE/GREEN
14 of 20 NOT USED
15 of 20 NOT USED
16 of 20 RED/BLUE
17 of 20 PINK/BLACK
18 of 20 BLACK/BLUE
19 of 20 NOT USED
20 of 20 LIGHT GREEN/RED
Thank you very very much! I just followed your instructions on my v5 sti, it works perfectly.
DO NOT yank off the pin out of the connector!!! Use a pick to lift up the plastic tab from the pin hole and gently pull the wire out.
Also, I have some questions about the Forester HVAC unit:
1, WIll it remember the temp/fan speed when I last shut it off? it always sets to 25 degrees when I turn it on.
2, Can I set it auto with leaving AC off?
Big difference by looking
Easier to mark 5/16, 13/16, 7/20 and remove all pins
Achive!
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post
yorkyturbo
Lighting and Other Electrical
2
29 November 2008 10:57 AM