90 good reasons to avoid cheap eBay headers
#91
Their exhausts ate just as bad ... Id swear that they have never actually seen a Subaru in the flesh by the build quality and the 1 inch gap in the middle of the exhaust system where the pipes don't reach each other cos they are fouling on almost every part of the underside that they possibly could.
awaits call from toyosport... Lol
i agree with David in the fmics too.
awaits call from toyosport... Lol
i agree with David in the fmics too.
#92
Scooby Regular
I'd certainly agree on the later Autobahn Classic intercooler kits, not so sure I would on the Japspeed Newage kit though.
They may not be as good as the likes of the Perrin or APS kits (Hardly suprising when they cost 5 times as much), however they certainly work well enough up to 450bhp, especially when you consider they only cost as much as a second hand STi topmount.
If you're going for really big power, you'd not be running either cheap headers or a cheap intercooler
They may not be as good as the likes of the Perrin or APS kits (Hardly suprising when they cost 5 times as much), however they certainly work well enough up to 450bhp, especially when you consider they only cost as much as a second hand STi topmount.
If you're going for really big power, you'd not be running either cheap headers or a cheap intercooler
Last edited by MartynJ; 07 December 2012 at 07:26 AM.
#93
Who's UP-Pipe 'design'
Martyn J (or anyone else in the know) - Have the RCM up-pipes now followed Harvey's (RIP) design or similar? That seemed to be the suggestion earlier on in the thread that the RCM ones would be revised/updated etc?
It's all about spool and low/mid range torque for me (hopefully)! Nod Nod Wink Wink
It's all about spool and low/mid range torque for me (hopefully)! Nod Nod Wink Wink
#94
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
There are always options for up pipes and the design, diameter, etc; are really engine specific. Harvey did a huge amount of work on up pipes and has produced one that works better than the standard - as supplied - up pipe with the Gt specs on most cars
But to just buy something ***** nilly and fit it cos " it is better " would prove nothing. If you want it right it has to be on rollers and the spool curves analysed. Then fit a different one and try again. If you're bothered, it'll take a whole day on the rollers to do that..
If a car is late spooling [ laggy most people call it ] the a venturi type up pipe ought to increase gas speed and improve spool, but it isn't an exact science.
One size definitely doesn't fit all.
David
But to just buy something ***** nilly and fit it cos " it is better " would prove nothing. If you want it right it has to be on rollers and the spool curves analysed. Then fit a different one and try again. If you're bothered, it'll take a whole day on the rollers to do that..
If a car is late spooling [ laggy most people call it ] the a venturi type up pipe ought to increase gas speed and improve spool, but it isn't an exact science.
One size definitely doesn't fit all.
David
Last edited by APIDavid; 07 December 2012 at 10:04 AM.
#95
I'd certainly agree on the later Autobahn Classic intercooler kits, not so sure I would on the Japspeed Newage kit though.
They may not be as good as the likes of the Perrin or APS kits (Hardly suprising when they cost 5 times as much), however they certainly work well enough up to 450bhp, especially when you consider they only cost as much as a second hand STi topmount.
If you're going for really big power, you'd not be running either cheap headers or a cheap intercooler
They may not be as good as the likes of the Perrin or APS kits (Hardly suprising when they cost 5 times as much), however they certainly work well enough up to 450bhp, especially when you consider they only cost as much as a second hand STi topmount.
If you're going for really big power, you'd not be running either cheap headers or a cheap intercooler
From what I have seen the limit of the toyosport equal length headers is 220 ish bhp. The limit of their unequal length versions seems to be 290bhp. Hardly big power.... and in all cases the cars made around 40-100bhp more on std headers.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM