M2RTXbugeye
#543
I have just read this from start to finish and you must of sank a small fortune into making your car look as good as it does, credit to you.
I do think some nice perrin wing stiffies will finish the back end off nicely
I do think some nice perrin wing stiffies will finish the back end off nicely
#546
I currently have a 2.1 CBD with an MD321V / 740 cc lateral injectors and its running 495bhp @1.7 bar on vpower with 410ft lb, but... its pretty laggy -it's at 1 bar by about 4600rpm on the road.
The 2.5 will more than sort that.
Look forward to hearing the end result.
#549
That'll be a great car , CBD + forged = mad low down torque / high top end without the 2.5 weaknesses. 550/550 or maybe more.
I currently have a 2.1 CBD with an MD321V / 740 cc lateral injectors and its running 495bhp @1.7 bar on vpower with 410ft lb, but... its pretty laggy -it's at 1 bar by about 4600rpm on the road.
The 2.5 will more than sort that.
Look forward to hearing the end result.
I currently have a 2.1 CBD with an MD321V / 740 cc lateral injectors and its running 495bhp @1.7 bar on vpower with 410ft lb, but... its pretty laggy -it's at 1 bar by about 4600rpm on the road.
The 2.5 will more than sort that.
Look forward to hearing the end result.
Cheers mate, bugs rule
Martin
#550
Right so a job needing do for a while as the haze in the lights wasn't a great sight up close. With the help of Andy (S555 MKR) and the use of his tools, hard work and oven this is what we came out with....
Before
Job start to finish
Painted up and stuck back together
Fitted in the dark
Quick snap this morning
Cheers
Martin
Before
Job start to finish
Painted up and stuck back together
Fitted in the dark
Quick snap this morning
Cheers
Martin
#551
Formerly ScoobyTeknix
iTrader: (64)
Join Date: Feb 2011
Location: Fleetwood, Lancashire
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
Cars looking really well now Martin not seen it in a while and fair play to you everything you do to it is spot on, on the engine side thought it was staying standard power haha your hooked now, I'll have to take you out in the yellow type r as this is running one of alyns CDB 2.5's with a stock mount gt30
Scott...
Scott...
#552
Cars looking really well now Martin not seen it in a while and fair play to you everything you do to it is spot on, on the engine side thought it was staying standard power haha your hooked now, I'll have to take you out in the yellow type r as this is running one of alyns CDB 2.5's with a stock mount gt30
Scott...
Scott...
My mate Daz said you was there when he was having his car mapped the other day.
Lol I know always said engine was staying standard but you know what I'm like and a ride in yours would defo seal the deal. Will give you a buzz this week have fmic that needs fitting along with inner wing caik.
Martin
#553
Formerly ScoobyTeknix
iTrader: (64)
Join Date: Feb 2011
Location: Fleetwood, Lancashire
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
Yea met daz up at teg with andrew c top lad nice spec on his motor as well, no probs Martin we can fit you I whenever for them bits to be put on, yellow machine might be finalised by then at last
A well built 2.5 with Avcs heads and a md321t would be a good road car for now spool would be great and if you build it with scope creep in mind i.e with decent pistons and rods 11m cossy ultra head studs or 14mm it if budget allows and a decent baffle plate etc, all you then need to do in the future is fit a rotated gt30 and some bigger injectors and it would be a beast
A well built 2.5 with Avcs heads and a md321t would be a good road car for now spool would be great and if you build it with scope creep in mind i.e with decent pistons and rods 11m cossy ultra head studs or 14mm it if budget allows and a decent baffle plate etc, all you then need to do in the future is fit a rotated gt30 and some bigger injectors and it would be a beast
Last edited by Scott@ScoobySpares; 07 October 2013 at 07:51 PM.
#555
Yea met daz up at teg with andrew c top lad nice spec on his motor as well, no probs Martin we can fit you I whenever for them bits to be put on, yellow machine might be finalised by then at last
A well built 2.5 with Avcs heads and a md321t would be a good road car for now spool would be great and if you build it with scope creep in mind i.e with decent pistons and rods 11m cossy ultra head studs or 14mm it if budget allows and a decent baffle plate etc, all you then need to do in the future is fit a rotated gt30 and some bigger injectors and it would be a beast
A well built 2.5 with Avcs heads and a md321t would be a good road car for now spool would be great and if you build it with scope creep in mind i.e with decent pistons and rods 11m cossy ultra head studs or 14mm it if budget allows and a decent baffle plate etc, all you then need to do in the future is fit a rotated gt30 and some bigger injectors and it would be a beast
Cheers Jon, Bugeye lights are bugger to do and so much more difficult then the blobs.
Martin
#561
Scooby Regular
iTrader: (8)
Join Date: Aug 2013
Location: Bolton
Posts: 401
Likes: 0
Received 0 Likes
on
0 Posts
Glad ya pleased with them Martin
It does look great against the paintwork. Its good to know we have done a set of Bug lights and will never need to do another set
Looking forward to seeing the updates bud
It does look great against the paintwork. Its good to know we have done a set of Bug lights and will never need to do another set
Looking forward to seeing the updates bud