New MOT regs come in force today
#64
Scooby Regular
iTrader: (11)
It depends really, doesn't it. If they're going to have a printed or computerized list of every single model variant and build-year of car which came with an airbag from factory, then yes, you'd get a fail for 'airbag is visibly missing' if you've got an aftermarket non-airbag wheel. If on the other hand all they're going to be doing is visually checking for factory steering wheels that were built to take an airbag but don't have one in there any more (for example, because original airbag deployed when numpty hit a tree or a kerb too hard, car was repaired, but airbag not replaced), then they're not going to care one bit about your (or my ) non-airbag aftermarket wheel.
Last edited by markjmd; 21 March 2013 at 07:19 PM.
#66
Scooby Regular
iTrader: (1)
Join Date: Jul 2007
Location: Between a speed bump and a pot hole
Posts: 519
Likes: 0
Received 0 Likes
on
0 Posts
Hope its that simple, it was registered 14 years ago and there's no SVA or import paperwork? I'm sure there'll be lots in the same position...
#67
Regarding the cat/exhaust, it just mentions this on the .gov website:
Section 7.1, MOI 3
Method of Inspection amended for purpose of clarity, to:
On petrol engine vehicles that qualify for a full catalyst emissions test, check the presence of the catalytic converter.
Note: To ascertain whether a vehicle qualifies for a full catalyst test, use the flow charts in Section 7.3.C disregarding the result of the Basic Emissions Test.
It doesn't actually mention you have to have the same number as factory fitted just as long as you have one present, and purely seems a visual check.
Section 7.1, MOI 3
Method of Inspection amended for purpose of clarity, to:
On petrol engine vehicles that qualify for a full catalyst emissions test, check the presence of the catalytic converter.
Note: To ascertain whether a vehicle qualifies for a full catalyst test, use the flow charts in Section 7.3.C disregarding the result of the Basic Emissions Test.
It doesn't actually mention you have to have the same number as factory fitted just as long as you have one present, and purely seems a visual check.
#69
Was about to scan in a copy of the official print out given to me by our tester, however with me being a numpty, I forgot everthing is online
Here's the changes: http://www.dft.gov.uk/vosa/repositor...013%20V1.0.pdf
Here's the FULL MOT test manuals: http://www.transportoffice.gov.uk/cr...sandguides.htm
Always worth a quick read through the full manual if you are worried about your car passing a MOT.
Here's the changes: http://www.dft.gov.uk/vosa/repositor...013%20V1.0.pdf
Here's the FULL MOT test manuals: http://www.transportoffice.gov.uk/cr...sandguides.htm
Always worth a quick read through the full manual if you are worried about your car passing a MOT.
Last edited by ALi-B; 22 March 2013 at 02:17 PM.
#70
Scooby Regular
iTrader: (1)
So after reading the regulations, if headlight washers and leveling systems are not fitted to aftermarket hids then there is no need to test them. I have retrofitted projector hids to my vehicle so should be ok
"Vehicles equipped with High Intensity Discharge (HID) or LED dipped beam headlamps MAY be fitted with headlamp washers and a suspension or headlamp self levelling system. Where such systems ARE fitted, they must work; however, it is accepted that it may not be possible to readily determine the functioning of self levelling systems. In such cases, the benefit of the doubt must be given. Headlamp washers may work in conjunction with the windscreen washers (when the dipped beam headlamps are switched on) or by a separate switch"
"Vehicles equipped with High Intensity Discharge (HID) or LED dipped beam headlamps MAY be fitted with headlamp washers and a suspension or headlamp self levelling system. Where such systems ARE fitted, they must work; however, it is accepted that it may not be possible to readily determine the functioning of self levelling systems. In such cases, the benefit of the doubt must be given. Headlamp washers may work in conjunction with the windscreen washers (when the dipped beam headlamps are switched on) or by a separate switch"
#71
Scooby Regular
iTrader: (2)
Join Date: Jun 2000
Location: Bookham, Surrey, UK
Posts: 940
Likes: 0
Received 0 Likes
on
0 Posts
Could an expert advise on my imminent MOT and my cracked number plate.
Basically, it was probably hit by someone parking and created a star type crack close to one of the mounting screws. Everything is still easily visible.
I've downloaded the The MOT Testing guide and can't find any reference to number plate damage.
It's not the fact that I know should really replace the plate, it's the phaff in doing so with all the documentation.
Can anyone advise please?
Basically, it was probably hit by someone parking and created a star type crack close to one of the mounting screws. Everything is still easily visible.
I've downloaded the The MOT Testing guide and can't find any reference to number plate damage.
It's not the fact that I know should really replace the plate, it's the phaff in doing so with all the documentation.
Can anyone advise please?
#74
#75
Scooby Regular
iTrader: (4)
Join Date: Sep 2009
Location: Bath
Posts: 930
Likes: 0
Received 0 Likes
on
0 Posts
Could an expert advise on my imminent MOT and my cracked number plate.
Basically, it was probably hit by someone parking and created a star type crack close to one of the mounting screws. Everything is still easily visible.
I've downloaded the The MOT Testing guide and can't find any reference to number plate damage.
It's not the fact that I know should really replace the plate, it's the phaff in doing so with all the documentation.
Can anyone advise please?
Basically, it was probably hit by someone parking and created a star type crack close to one of the mounting screws. Everything is still easily visible.
I've downloaded the The MOT Testing guide and can't find any reference to number plate damage.
It's not the fact that I know should really replace the plate, it's the phaff in doing so with all the documentation.
Can anyone advise please?
thats fine bud,yes looks perfectly ledgible,
#79
Scooby Regular
Join Date: Jan 2013
Location: Northampton
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
So with all this extra work, are we going to expect an imminent (if not already)rise in MoT prices.......just another tax. They'll have fun looking for my cats then. I'll just say you're not looking hard enough.
#80
Scooby Regular
iTrader: (5)
Join Date: Oct 2006
Location: Ramsey, Cambs
Posts: 1,424
Likes: 0
Received 0 Likes
on
0 Posts
Newage cars have the third up pipe cat.
#82
Only for petrol engined vehicles- its not part of the MOT test for Diesels.
Ive just de-catted my diesel pickup ( 53 plate) for better torque and its perfectly MOT compliant . The garage chap did mention that its different for 2008 models onwards but think he was wrong on that and anyway my MOT man wouldnt be too concerned anyway
Ive just de-catted my diesel pickup ( 53 plate) for better torque and its perfectly MOT compliant . The garage chap did mention that its different for 2008 models onwards but think he was wrong on that and anyway my MOT man wouldnt be too concerned anyway
Thread
Thread Starter
Forum
Replies
Last Post