Gearbox going
#1
The gearbox on my MY98 Scoob in going. It's hard to get it into 1st and reverse and not easy getting it into other gears. Intermittently it gets better but I'm reconciled to having some work done. It's done 90K miles.
What am I looking at:
Can it be fixed?
What does a refurbished box cost and are they around.
What's a new box going to do to my wallet?
Any help or advice would be very much appreciated.
FG
What am I looking at:
Can it be fixed?
What does a refurbished box cost and are they around.
What's a new box going to do to my wallet?
Any help or advice would be very much appreciated.
FG
#2
Scooby Regular
Join Date: Sep 2001
Location: Docklands, London
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
I thought the same was happening to my old scoob. I got some prices from various dealers and Scoobysport (who were actually pretty competitive despite no SIDC discount) and replacing the clutch is a hell of a lot less expensive than the gearbox, and a lot of the costs is labour.
Post on Drivetrain and General Technical for a better response than on here. John Felstead and the guys on that part of the bbs seem to be the men to talk to. Seems that what they've forgotten about scoobs most people never knew.
Maz.
Post on Drivetrain and General Technical for a better response than on here. John Felstead and the guys on that part of the bbs seem to be the men to talk to. Seems that what they've forgotten about scoobs most people never knew.
Maz.
#3
Thanks Maz!
If you are having problems with all the gears then it could be a clutch issue. It could be the box, but i would check a few things before you start tearing the car apart.
The first thing you need to do is get the fluid replaced in the clutch system, it gets very hot there being just over the turbo and can degrade. Use a good spec dot 5.1 or high grade dot 4 and bleed through.
Next, drain the gearbox oil and replace it with fresh, sometimes an ageing oil can cause the syncro's to drag.
Next is the clutch, that may be dragging and not releasing due to contamination on the plates/flywheel. If it isnt that then it's time to get the box checked out.
If you are having problems with all the gears then it could be a clutch issue. It could be the box, but i would check a few things before you start tearing the car apart.
The first thing you need to do is get the fluid replaced in the clutch system, it gets very hot there being just over the turbo and can degrade. Use a good spec dot 5.1 or high grade dot 4 and bleed through.
Next, drain the gearbox oil and replace it with fresh, sometimes an ageing oil can cause the syncro's to drag.
Next is the clutch, that may be dragging and not releasing due to contamination on the plates/flywheel. If it isnt that then it's time to get the box checked out.
#4
Thanks for the replies.
The car has just had its 90K service with an authorised dealer so all fluids have just been replaced.
I don't think the clutch is dragging, and it feels more like the box to me. Is there any way I can tell, or get a garage to check it out?
Thanks
FG
The car has just had its 90K service with an authorised dealer so all fluids have just been replaced.
I don't think the clutch is dragging, and it feels more like the box to me. Is there any way I can tell, or get a garage to check it out?
Thanks
FG
Thread
Thread Starter
Forum
Replies
Last Post