Finally !! Evo 5 Intercooler on scoob
07 May 2004, 09:47 AM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Finally !! Evo 5/6 Intercooler on scoob
Finished late last night, (eyes are still asleep) Few Tweeks left to do, Fit nice proper brackets, Polish pipe work, Fit an additional straight flexi on the Drivers side pipe (bit to rigid) Oh yes & fit some nice mesh !!!
Car pulls much stronger after a quick blast this Morn, Needs an ecu reset really.
MY94 UK
http://images.fotopic.net/?id=4317148&outx=482&oq=0
http://images.fotopic.net/?id=4317149&outx=482&oq=0
http://images.fotopic.net/?id=4317150&outx=482&oq=0
Car pulls much stronger after a quick blast this Morn, Needs an ecu reset really.
MY94 UK
http://images.fotopic.net/?id=4317148&outx=482&oq=0
http://images.fotopic.net/?id=4317149&outx=482&oq=0
http://images.fotopic.net/?id=4317150&outx=482&oq=0
Last edited by DeanF; 07 May 2004 at 10:34 AM.
07 May 2004, 03:07 PM
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
I have a greddy temp gauge fitted & so far no noticable change, Will have to see on a baking hot day though !!! Saying that when the fan does run you can feel it pulling through the intercooler quite noticably.. Only time will tell
Apparently the closer to the Rad the better sort of acts as one core ..
Thanks
Dean
Apparently the closer to the Rad the better sort of acts as one core ..
Thanks
Dean
07 May 2004, 03:42 PM
#5
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
I would fit a sheet of metal accross the top as a shield and down the sides of the rad to force air through it..
David
David
07 May 2004, 04:04 PM
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
David,
Do you mean in the gaps that have now been created by moving the rad back ?? So the air does not just take the easy route out as such.. Yes , sounds like a good idea..
Dean
Do you mean in the gaps that have now been created by moving the rad back ?? So the air does not just take the easy route out as such.. Yes , sounds like a good idea..
Dean
Last edited by DeanF; 07 May 2004 at 04:07 PM.
Trending Topics
08 May 2004, 09:59 PM
#10
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Apr 2002
Posts: 2,808
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by StickyMicky
the whole thing is a good idea
who made the pipeing to plumb it in?
who made the pipeing to plumb it in?
I Mocked it up using pipe lagging , Cut it & gaffer taped in position, My friend who is a Powerflow exhaust manufacturer bent the pipe work for me..
dONE A FEW MILES TODAY & DEFINITELY PULLS REALLY STRONG
Thread
Thread Starter
Forum
Replies
Last Post
Flat4x4-again
General Technical
2
29 September 2015 06:32 PM
