what hp will my injectors max out at ?
#1
Scooby Regular
Thread Starter
Join Date: Mar 2008
Location: leeds west yorkshire
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
what hp will my injectors max out at ?
i am looking at getting a td06 and i dont know what my injectors will run to am i better getting some bigger injectors if so what size do i need can someone please tell me i have an 04 plate sti
#3
Scooby Regular
iTrader: (21)
Join Date: Oct 2008
Location: Whitby, North Yorkshire
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
The cheaper option would be to keep yours, and get a fuel pressure regulator, and bump the pressure up a bit.
Or, get some 650cc's or 750cc's if your going to go for big power.
Or, get some 650cc's or 750cc's if your going to go for big power.
#5
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
Hi MRC !
Lot easier to add a an up-rated fpr than to change the injectors, an extra 0.5 bar saw my std STI pinks running at 94% for 400 bhp.
HTH
dunx
Lot easier to add a an up-rated fpr than to change the injectors, an extra 0.5 bar saw my std STI pinks running at 94% for 400 bhp.
HTH
dunx
#6
Scooby Regular
Join Date: Jul 2007
Location: Newcastle
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
EDIT - http://www.scoobypedia.co.uk/index.p...rFromInjectors
Last edited by Semper; 09 May 2009 at 08:45 AM.
#7
Scooby Regular
I would prefer to get the injector that is fit for purpose, for the power level at hand, at standard fuel pressure, with good headroom.... in this case, I would not run standard pinks to extract 400bbhp.
When I was running pinks on my Spec C, it was making about 375bhp and duty cycle was at 90+%. This was using a Spec C uprated fuel pump and standard pressure.
I would suspect that for a TD06 you would be better off getting 650's.
More than one way to skin a cat, as you can get the pinks modified to flow a lot more, as well as changing the FPR to bump the pressure up etc.
Plenty of choices available.
When I was running pinks on my Spec C, it was making about 375bhp and duty cycle was at 90+%. This was using a Spec C uprated fuel pump and standard pressure.
I would suspect that for a TD06 you would be better off getting 650's.
More than one way to skin a cat, as you can get the pinks modified to flow a lot more, as well as changing the FPR to bump the pressure up etc.
Plenty of choices available.
Trending Topics
#8
Scooby Regular
iTrader: (12)
Join Date: Jun 2007
Location: 700+ WR1 aka The Vuvu Zela...10.6 @ 136 weighing 1370kg....say no more....
Posts: 3,734
Likes: 0
Received 0 Likes
on
0 Posts
I'm running TD05/06 20G and ran 420bhp on pinks (with fuelab fpr). They were maxed, but it's possible!
EDIT - Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Estimated Horse Power from Injectors
EDIT - Scoobypedia | Trusted knowledge for everything Subaru | Knowledge / Estimated Horse Power from Injectors
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM