results from harvey up pipe
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: southampton
Posts: 1,589
Likes: 0
Received 0 Likes
on
0 Posts
results from harvey up pipe
well i have had a harvey smith up pipe fitted today as well as new gasketts on my up pipe down pipe and headers and inlet manifold as they were all slighty blowing and my indutcion pipe has been replaced as that had a hole in it. i have made 397.4hp with 360ft and full boost has is now coming in 400 rpm early which just as harvey said 400-500rmp sooner, ive seem to have made 12hp more job done i think if i had version 4 sti heads on instead of my version 4 wrx heads i would be yet agian seeing an improvment i will try and get the graphs up soon as i have a before and after graph and yes i do now that dynos lie a bit but if you average it still got to be in te380+ mark as this is what a 20g is meant to do so job done cheers havrey and also cheers for the bit of heat wrap that done just the right amount on my down pipe
#5
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: southampton
Posts: 1,589
Likes: 0
Received 0 Likes
on
0 Posts
forgive my art work and plese note that not all 20g will make this power on a 2.0 forged engine and myabe this graph is a little high but im sure it is in the 380+ area and yes it feels quicker then what it did before as i found entering a corner which i use to taking in 3rd gear p,s i have notice thou this graph shows 3rd gear but i am running a six speed box. and on the road it seems to come in a touch quicker the boost so who knows thats dyno graphs for you but i have definetly noticed the difference . we did the fianl tweeks on the road after this graph
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: southampton
Posts: 1,589
Likes: 0
Received 0 Likes
on
0 Posts
oh and p.s every one i dont wnat this tunring into a thread like the vf35 380bhp thread as im fully aware that dynos are not the gospel but i am very please with this up pipe and to how it has responded
Trending Topics
#8
Former Sponsor
iTrader: (48)
Thanks for posting that result. On the 3 bolt special uppipe on tubular headers the gain varies but generally 250-500 spool improvement and more torque very noticably more right across the rev range. Ultimate BHP will not be significantly greater but the earlier and greater torque rush makes the car a lot faster and much more pleasing to drive.
Cheers mate.
I havn't seen an OE 2008 uppipe but I do both 2 bolt and 3 bolt uppipes if the 2008 uppipe is the same as a 2005 then I do it but if it is not I would need a sample. If you are running RCMS 3 bolt flange header sets then I can make a big difference. I don't do anything for twin scroll because there is no point. The twin scroll uppipe is already pretty good as is the twin scroll manifold.
Cheers mate.
I havn't seen an OE 2008 uppipe but I do both 2 bolt and 3 bolt uppipes if the 2008 uppipe is the same as a 2005 then I do it but if it is not I would need a sample. If you are running RCMS 3 bolt flange header sets then I can make a big difference. I don't do anything for twin scroll because there is no point. The twin scroll uppipe is already pretty good as is the twin scroll manifold.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM