Can i make this DVD multi region?
08 January 2003, 05:22 PM
#2
Moderator
iTrader: (5)
Join Date: Nov 2001
Location: Not all those who wander are lost
Posts: 17,863
Received 0 Likes
on
0 Posts
1. Turn on the player. Make sure the tray is closed and no disc is inserted. The Samsung logo should be visible on the TV screen.
2) Hold down the PLAY and STOP buttons on the front panel of the player. Within a few seconds, a language select screen should appear. Press 1 (on the remote) for English.
3) The Samsung logo should reappear, with the message "No Disc" on the screen and/or in the front panel display. Now, press the following buttons, on the remote, in sequence:
REPEAT, 5, 7, 5, 3, 8
Press them slowly and deliberately, but not too slowly (if you're unsure, about one button press per second is adequate). Don't take any notice of what appears on the TV screen while you're doing this. (Also, make sure you press the actual REPEAT button and *not* A-B REPEAT.)
4) *After* you've finished the button sequence, the number "02" should be visible in one corner of the TV screen. This indicates your currently set region.
5) Press 9 on your remote - the number will change to "09" - then *immediately* press OPEN/CLOSE on the remote to open the tray. (You *must* press OPEN/CLOSE before "09" disappears from the screen.)
6) Wait at least 15 seconds then press POWER on the remote - the tray will close and the player will go into standby mode. Wait at least another 15 seconds then press POWER again to turn the player back on.
You should now be able to play discs from any region.
2) Hold down the PLAY and STOP buttons on the front panel of the player. Within a few seconds, a language select screen should appear. Press 1 (on the remote) for English.
3) The Samsung logo should reappear, with the message "No Disc" on the screen and/or in the front panel display. Now, press the following buttons, on the remote, in sequence:
REPEAT, 5, 7, 5, 3, 8
Press them slowly and deliberately, but not too slowly (if you're unsure, about one button press per second is adequate). Don't take any notice of what appears on the TV screen while you're doing this. (Also, make sure you press the actual REPEAT button and *not* A-B REPEAT.)
4) *After* you've finished the button sequence, the number "02" should be visible in one corner of the TV screen. This indicates your currently set region.
5) Press 9 on your remote - the number will change to "09" - then *immediately* press OPEN/CLOSE on the remote to open the tray. (You *must* press OPEN/CLOSE before "09" disappears from the screen.)
6) Wait at least 15 seconds then press POWER on the remote - the tray will close and the player will go into standby mode. Wait at least another 15 seconds then press POWER again to turn the player back on.
You should now be able to play discs from any region.
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM