office network using sage
02 July 2009, 12:26 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jul 2009
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
office network using sage
Hi to all could anybody please give me a step by step approch to setting up an office network using sage so all computers can access accounts and update them Thank You
02 July 2009, 03:22 PM
#3
Scooby Regular
Join Date: Feb 2004
Location: High Wycombe
Posts: 3,763
Likes: 0
Received 0 Likes
on
0 Posts
Bizarre 1st post, but hi.
Your going to need a multi user install of sage - if you've not got the licenses for it, you won't be able to do so.
It's pretty straight forward really. Open up a network share on the master PC (where Sage resides). Set a map to a drive on client machines (or can do through UNC). Run the sage netsetup on the client machines and you are done!
If using more than 3 users & you have a fairly big Database (on a standard machine) performance will be shocking when doing sorts.
Your going to need a multi user install of sage - if you've not got the licenses for it, you won't be able to do so.
It's pretty straight forward really. Open up a network share on the master PC (where Sage resides). Set a map to a drive on client machines (or can do through UNC). Run the sage netsetup on the client machines and you are done!
If using more than 3 users & you have a fairly big Database (on a standard machine) performance will be shocking when doing sorts.
Thread
Thread Starter
Forum
Replies
Last Post
BlueBlobZA
Member's Gallery
30
25 July 2016 09:14 AM
IWatkins
ScoobyNet General
1
24 October 2000 10:46 AM
