Engine rebuild
#2
I rememeber they had their own STi3 engine re-built, but had various problems with it. Are they still using the same engine builder ??? Ask them whatever happened to their own re-built engine ?
Dan.
Dan.
#3
Scooby Regular
Have a look at http://www.autosportif-preparations.co.uk on the net, they rebuilt a mate of mines & hes well happy
[Edited by Andy McCord - 1/13/2003 1:39:12 PM]
[Edited by Andy McCord - 1/13/2003 1:39:12 PM]
#4
Former Sponsor
iTrader: (48)
You could do a lot worse than contact Roger Clark Motorsport near Leicester especially if you want upgrades like forged pistons, rods, a choice of compression ratios, oil pump mod etc. etc.
Matt Clark rebuilt my engine at 14,487mls and it has 31,000 approx now with no engine issues whatsoever. The last4,700 mls were with the new Ion Performance turbo and power of around 420bhp.
Matt can also provide these turbos and header systems to match performance aspirations.
Matt Clark rebuilt my engine at 14,487mls and it has 31,000 approx now with no engine issues whatsoever. The last4,700 mls were with the new Ion Performance turbo and power of around 420bhp.
Matt can also provide these turbos and header systems to match performance aspirations.
#5
Hi AJ. I've just been there for a chat aboout the same thing.
They send engines to Norfolk for rebuilds, currently have 4 or 5 away. Hopefully this means they are OK. . .
So who's had an engine rebuilt, where and why?
Recomendations welcome.
Zanlin
[Edited by Zanlin - 1/11/2003 5:30:22 PM]
They send engines to Norfolk for rebuilds, currently have 4 or 5 away. Hopefully this means they are OK. . .
So who's had an engine rebuilt, where and why?
Recomendations welcome.
Zanlin
[Edited by Zanlin - 1/11/2003 5:30:22 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM