Help - What screwdriver to undo screws for the MAF sensor?
#1
I have the new bitty for the maf sensor...
but.. i did not look at the screws holding the sensor inplace before...
is there anything i can use to undo these screws, and do them back up again?
but.. i did not look at the screws holding the sensor inplace before...
is there anything i can use to undo these screws, and do them back up again?
#5
These are Torq. the bit in the middle
is the "tamper-proof" part.
you can get bits/drivers with a corresponding
hole in the middle.
it's not too difficult to 'remove' the bit
in the middle (i use a small bladed screwdriver)
alan
is the "tamper-proof" part.
you can get bits/drivers with a corresponding
hole in the middle.
it's not too difficult to 'remove' the bit
in the middle (i use a small bladed screwdriver)
alan
#7
Scooby Regular
Phil,
If you have a look here, even a pair of pliers will get them off
http://www.scoobymods.com/forums/sho...=&threadid=414
Wouldn't recommend it though.
So, did you get yours replaced?
Stefan
If you have a look here, even a pair of pliers will get them off
http://www.scoobymods.com/forums/sho...=&threadid=414
Wouldn't recommend it though.
So, did you get yours replaced?
Stefan
Trending Topics
#10
Scooby Regular
Get a set of Torx bits, then they will all be covered - and yes, mention you need the security ones with the pin in the middle.
Any decent tool shop with have them - and they are also in the Screwfix and Machine Mart catalogues.
Any decent tool shop with have them - and they are also in the Screwfix and Machine Mart catalogues.
#13
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
bought a set on tuesday from halfords they are Security Torx. £15 i think for 6.
Packet says Professional Security Star Bit Sockets on Rail.
Black packet with green lable saying 3/8" Drive.
Packet says Professional Security Star Bit Sockets on Rail.
Black packet with green lable saying 3/8" Drive.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM