De cat downpipe. Issues involved in doing it?
11 January 2003, 07:48 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2002
Location: Warwickshire, UK
Posts: 1,185
Likes: 0
Received 0 Likes
on
0 Posts
Hi
I have a UK MY98 Turbo.
Bought a SS back box. Loved it!
Bought a SS de cat centre. Thought it didnt add much. But...seems better at low revs, could be the weather? Then when you boot it, it sounds fkin great
Did not think I would want to spend the £400 on the downpipe. There again I did not think I would mod my first Scoob
So, OK I now want the downpipe.
What I would like to know is how it affects anything else as a side effect? E.g. [/dumb mode on]MAF sensor[/dumb mode off - a bit]. Chip mapping etc etc. Basically can I bung it on without concern for anything else, or is it more complicated than?
TIA for all advise
Matt
I have a UK MY98 Turbo.
Bought a SS back box. Loved it!
Bought a SS de cat centre. Thought it didnt add much. But...seems better at low revs, could be the weather? Then when you boot it, it sounds fkin great
Did not think I would want to spend the £400 on the downpipe. There again I did not think I would mod my first Scoob
So, OK I now want the downpipe.
What I would like to know is how it affects anything else as a side effect? E.g. [/dumb mode on]MAF sensor[/dumb mode off - a bit]. Chip mapping etc etc. Basically can I bung it on without concern for anything else, or is it more complicated than?
TIA for all advise
Matt
11 January 2003, 08:36 PM
#4
Scooby Regular
Join Date: Aug 2002
Location: walsall,west midlands
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
get the hayward+scott downpipe,open neck,
fantastic quality and is only around £200 and can be bought on here from the scooby shop,have a look!!!!!!!!its a sexy bit of kit!!!!!!!!!
get some exhaust insulation tape around it before you fit it as it keeps the temp down under the bonnet.
http://www.proven-products.co.uk/products/cooltek.htm
fantastic quality and is only around £200 and can be bought on here from the scooby shop,have a look!!!!!!!!its a sexy bit of kit!!!!!!!!!
get some exhaust insulation tape around it before you fit it as it keeps the temp down under the bonnet.
http://www.proven-products.co.uk/products/cooltek.htm
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM