increased pressure VS standart DumpValve
27 June 2003, 10:50 AM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2003
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
What is the MAX pressure level for STD DV then it starts to recirculate air? Im asking it cause ive been told that if you increase pressure (i got Boost controller in my car) then STD DV will not hold it more than STD pressure supposed to be.
At the moment maximum i did was 1.1 kg/cm2 and it was OK. Car is MY95 jspec if it make any diff.
If its true would Blow off like HKS help? Also if true whats going on - does pressure being stuck at some level or it drops?
At the moment maximum i did was 1.1 kg/cm2 and it was OK. Car is MY95 jspec if it make any diff.
If its true would Blow off like HKS help? Also if true whats going on - does pressure being stuck at some level or it drops?
02 July 2003, 08:05 AM
#6
Scooby Regular
Thread Starter
Join Date: Mar 2003
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
could anyone give the answer what BOOST IS STD DV CAPABLE OF. Im currently running about 0.9 bar. Seems everything is OK now. What if i raise to 1.2 bar will DV hold it.
Main reason im asking is that i have HKS BlowOff for a reasonable price but need no woosh and splash but working purposeful device under bonnet. Is it?
Main reason im asking is that i have HKS BlowOff for a reasonable price but need no woosh and splash but working purposeful device under bonnet. Is it?
Thread
Thread Starter
Forum
Replies
Last Post
matt12
ScoobyNet General
59
08 November 2015 09:15 PM
jobegold@hotmail.co.uk
ScoobyNet General
2
27 September 2015 09:44 PM
aaron_ions
General Technical
1
17 September 2015 10:42 AM