TD05 turbo
#2
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
I did 345bhp and 342Lbft on a 100% std td05
different up-pipe / downpipe / ported headers / and hks air filter
David
Edited to add on 100% optimax.. no octane boosters or homebrew specials..
David
[Edited by David_Wallis - 7/23/2003 6:07:54 PM]
different up-pipe / downpipe / ported headers / and hks air filter
David
Edited to add on 100% optimax.. no octane boosters or homebrew specials..
David
[Edited by David_Wallis - 7/23/2003 6:07:54 PM]
#7
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
I was running much more boost than I am now !! Around 1.7 bar IIRC
using a chargecooler, std injectors with 2 extra injectors in the plenum chamber and an uprated fuel pump and regulator.
Andy
using a chargecooler, std injectors with 2 extra injectors in the plenum chamber and an uprated fuel pump and regulator.
Andy
Trending Topics
#11
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
Edited to add on 100% optimax.. no octane boosters or homebrew specials..
I made a lowly 317bhp and 291lbft (on 4x std 380 injectors)@1.2bar
Rob
#12
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
I was supposed to be running 22psi but dont think I ever managed more than 20psi on rollers..
it would have been more boost given time..
edited to add..
andy runs less boost now as he turned into a ***** when he had to open the engine up
(mine was using 4x 550cc's at unknown pressure .. just mapped around it. :O )
David
[Edited by David_Wallis - 7/24/2003 12:24:52 AM]
it would have been more boost given time..
edited to add..
andy runs less boost now as he turned into a ***** when he had to open the engine up
(mine was using 4x 550cc's at unknown pressure .. just mapped around it. :O )
David
[Edited by David_Wallis - 7/24/2003 12:24:52 AM]
#13
Scooby Regular
Join Date: Apr 2003
Location: Cambridgeshire
Posts: 1,541
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know where I can obtain a set of 440cc or 550cc injectors for a MY96 (I think it has phase 1 fuel rails (STD))
Cheers
[Edited by Delboy2 - 7/24/2003 1:43:50 AM]
Cheers
[Edited by Delboy2 - 7/24/2003 1:43:50 AM]
#15
Scooby Regular
Thread Starter
Join Date: Mar 2002
Location: Newport S.Wales
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Delboy
I have just purchased a set for a MY96 from scoobymania (www.scoobymania.co.uk). They are £110 + VAT each so works out to be about £520 including VAT for the set. They are also a direct replacment for the standard ones and come with everything needed to fit them.
I hope this helps
Gavin
Edited to say they were 550cc injectors.
[Edited by GavinR96 - 7/24/2003 9:21:37 AM]
I have just purchased a set for a MY96 from scoobymania (www.scoobymania.co.uk). They are £110 + VAT each so works out to be about £520 including VAT for the set. They are also a direct replacment for the standard ones and come with everything needed to fit them.
I hope this helps
Gavin
Edited to say they were 550cc injectors.
[Edited by GavinR96 - 7/24/2003 9:21:37 AM]
Thread
Thread Starter
Forum
Replies
Last Post