Forged Pistons and Rods for your 2.0 ?
#1
Subaru Tuning Specialist
Thread Starter
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Look here for a good buy on JE pistons and Eagle H beam steel rods
http://forums.nasioc.com/forums/show...hreadid=385429
"Forged JE pistons, H beam rods, wrist pins, locks and plasma moly rings; $759"
Thats only £470 !!!! Even if it cost £100 to ship (which it won't) it looks like an excellent buy to me
Andy
http://forums.nasioc.com/forums/show...hreadid=385429
"Forged JE pistons, H beam rods, wrist pins, locks and plasma moly rings; $759"
Thats only £470 !!!! Even if it cost £100 to ship (which it won't) it looks like an excellent buy to me
Andy
#4
Andy
Sorry to hijack thread, but did you get my E mail re ignition timing? (E mail from JPayne)
Back on thread subject, I have a friend in Washington who I may get to order this for me then arrange for him to post.
Cheers
Ivan
Sorry to hijack thread, but did you get my E mail re ignition timing? (E mail from JPayne)
Back on thread subject, I have a friend in Washington who I may get to order this for me then arrange for him to post.
Cheers
Ivan
Trending Topics
#8
Cord
I can't get onto the thread that Andy put up, just tried it again, you have had the same thought as me... If you are going to do it, do it properly....
Once I get onto thread will send E mail to enquire.
Am seeing my friend in October so can possibly pick them up!
Hand luggage perhaps?????
Ive
I can't get onto the thread that Andy put up, just tried it again, you have had the same thought as me... If you are going to do it, do it properly....
Once I get onto thread will send E mail to enquire.
Am seeing my friend in October so can possibly pick them up!
Hand luggage perhaps?????
Ive
#12
Scooby Regular
Join Date: Apr 2003
Location: East Lothian
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Their on their way.
Received E-mail from Dyno-flo yesterday explaining that.
Yes price was for full set Ha Ha.
Only do c/c orders over Phone .
Phoned last night.
Deal done. Ask for Keith.
$60 shipping. Plus duty.
Still a bargain.
Cheers Andy.
Received E-mail from Dyno-flo yesterday explaining that.
Yes price was for full set Ha Ha.
Only do c/c orders over Phone .
Phoned last night.
Deal done. Ask for Keith.
$60 shipping. Plus duty.
Still a bargain.
Cheers Andy.
#13
Subaru Tuning Specialist
Thread Starter
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Nice one Steve That works out approx £500 plus any vat you get hit for, cheap way to bulletproof your motor
Let me know when they arrive, I wouldn't mind a look at them
cheers
Andy
Let me know when they arrive, I wouldn't mind a look at them
cheers
Andy
#19
I got through to them last week and ordered a set, they do not do a kit for a 2.2, I also asked about a crank, but also got a no!
Just picked up a block and heads to bulid up... so waiting for the pistons etc.
Ive
Just picked up a block and heads to bulid up... so waiting for the pistons etc.
Ive
#20
Scooby Regular
Join Date: Jul 2002
Location: RB Motorsport
Posts: 379
Likes: 0
Received 0 Likes
on
0 Posts
please post some pics when your bits arrive. Ive, what block have you got, also what rods/pistons have you ordered and can I be nosey and ask what you paid?
#23
Still not arrived!!
Cord these are going in an open deck block which will be strong enough for this kit, I have a closed deck block in the car at the moment which will have a stroker kit put in it once the above has been finished.
I,m looking for a reliable 350bhp from the open deck and about 450 from the closed deck with a 2.2 stoker kit in it.
However.... I am still looking for a 2.5 litre lump or info on how to get the 2.2 to 2.5... Is it just the crank?
Ive
Cord these are going in an open deck block which will be strong enough for this kit, I have a closed deck block in the car at the moment which will have a stroker kit put in it once the above has been finished.
I,m looking for a reliable 350bhp from the open deck and about 450 from the closed deck with a 2.2 stoker kit in it.
However.... I am still looking for a 2.5 litre lump or info on how to get the 2.2 to 2.5... Is it just the crank?
Ive
#24
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
2.5 is larger bore & stoke..
2.2 could possibly be gained by stroke alone.. but piston rings /oil control rings will probably go past gudgeon pin access hole unless the block is re-linered.
David
2.2 could possibly be gained by stroke alone.. but piston rings /oil control rings will probably go past gudgeon pin access hole unless the block is re-linered.
David
#26
Scooby Regular
Join Date: May 2002
Location: Scotland
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
#27
Hi Caz,
They certainly do look shiney! Have you weighed a piston and a rod to see how much lighter they are than the standard items?
If you don't mind me asking, how much did they end up costing you, and how long did you have to wait until they arrived?
Moray
They certainly do look shiney! Have you weighed a piston and a rod to see how much lighter they are than the standard items?
If you don't mind me asking, how much did they end up costing you, and how long did you have to wait until they arrived?
Moray
#28
Scooby Regular
Join Date: May 1999
Location: SSO2003 2nd, SSO2005 1st, SSO2006 2nd, TACC Rd4 5th 4wd: In my car ;-)
Posts: 2,637
Likes: 0
Received 0 Likes
on
0 Posts
Looks like the gudgeon pin clips are "Spirolocks". If they are, make sure they're fitted correctly. They are very good, but a SOB to fit.
Mark.
Mark.
#30
Scooby Regular
Join Date: May 2002
Location: Scotland
Posts: 2,148
Likes: 0
Received 0 Likes
on
0 Posts
Moray
According to the spec sheet, each piston weighs 375 grams. I don't have the weight yet for the rods but will find out soon.
Well the total cost was.......$834 dollars = £517.79
Customs cost £118.86
Grand total = £636.65
According to the spec sheet, each piston weighs 375 grams. I don't have the weight yet for the rods but will find out soon.
Well the total cost was.......$834 dollars = £517.79
Customs cost £118.86
Grand total = £636.65