Defi installation - sensors
11 September 2001, 10:38 AM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2000
Posts: 2,912
Likes: 0
Received 0 Likes
on
0 Posts
Hiya fellas!
I'm helping a good friend of mine installing his Defi stuff...and I need to know a few things.
1. Fuel preassure - what's the internal diameter of the fuelling hose?
2. What size is the "bolt" on the sensors...M10?
Cheers
/Jerry
I'm helping a good friend of mine installing his Defi stuff...and I need to know a few things.
1. Fuel preassure - what's the internal diameter of the fuelling hose?
2. What size is the "bolt" on the sensors...M10?
Cheers
/Jerry
12 September 2001, 08:33 AM
#4
Scooby Regular
Join Date: Sep 2000
Location: London
Posts: 7,039
Likes: 0
Received 0 Likes
on
0 Posts
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:<HR>Originally posted by SecretAgentMan:
<B>1. Fuel preassure - what's the internal diameter of the fuelling hose?
2. What size is the "bolt" on the sensors...M10?[/quote]
Jerry,
Do you mean the thread size? I don't know what the thread size is but I can measure it for you if nobody else posts the answer. When you are talking about the sensors, I presume you mean the Oil Pressure/Oil Temp (as I know *they* are the same size)???
I also know that the Oil P/T sensors screw straight into the standard Subaru adaptors which screw into the block.
Don't know if any of this helps,
Matt
<B>1. Fuel preassure - what's the internal diameter of the fuelling hose?
2. What size is the "bolt" on the sensors...M10?[/quote]
Jerry,
Do you mean the thread size? I don't know what the thread size is but I can measure it for you if nobody else posts the answer. When you are talking about the sensors, I presume you mean the Oil Pressure/Oil Temp (as I know *they* are the same size)???
I also know that the Oil P/T sensors screw straight into the standard Subaru adaptors which screw into the block.
Don't know if any of this helps,
Matt
12 September 2001, 10:01 AM
#6
Scooby Regular
Thread Starter
Join Date: Dec 2000
Posts: 2,912
Likes: 0
Received 0 Likes
on
0 Posts
Cheers fellas!
Uh-oh...so the thread is 1/8th NPT
is that the same as on the OEM oil preassure switch?
You wouldn't believe the problems I had trying to source a welding nut for my 1/8th NPT egt probe...
8mm is that the internal diameter?
/J
Uh-oh...so the thread is 1/8th NPT
is that the same as on the OEM oil preassure switch?You wouldn't believe the problems I had trying to source a welding nut for my 1/8th NPT egt probe...
8mm is that the internal diameter?
/J
Thread
Thread Starter
Forum
Replies
Last Post